Advertisement
06097 Towel bar only: Press the end pieces
over the mounting pieces (1). Use the enclosed
allen wrench to tighten the set screws (2)
Other accessories and towel bars: Press the
accessory firmly over the mounting piece.
The retaining pin in the accessory will snap
into place, holding the accessory firmly on the
mounting piece.
To remove the accessory from the wall
06097 Towel bar only: Use the allen wrench to
loosen the set screw (1). Pull the accessory away
from the wall (2).
All other accessories and towel bars: Push a small
tool, such as an allen wrench, through the hole in the
bottom ot the escutcheon.
Push the tool firmly against the retaining pin (1). At the
same time, pull out on the holder (2).
4
Advertisement
