Advertisement
Quick Links
1. Package Contents
-
2.4GHz audio/ video transmitter x 1
-
2.4GHz audio/ video receiver x 1
-
Infrared (IR) eye cable x 1
-
Antenna x 2
-
Audio/ video cables x 2
2.1 Transmitter
1.
Power switch : Power ON/OFF AV@AirPro.
2.
CH : Channel selection.
3.
CH LED : Channel indicator.
4.
Power Led : Lighting when AV@AirPro power on.
5.
Antenna : Connect Antenna to "ANT" of Transmitter.
6.
ANT : Antenna connection.
7.
A-IN : Audio in from external video device (e.g. DVD player).
8.
V-IN : video in from external video device (e.g. DVD player).
9.
DC 6V : power in.
10. IR LED : Infrared (IR) eye cable connection.
11. Infrared (IR) eye cable : Connect Infrared (IR) eye cable to "IR LED"
AV@AirPro Quick Installation Guide
-
Remote antenna x 1
-
Power adapters (DC 6V) x 2
-
User's manual x 1
of Transmitter.
1
Advertisement
Summary of Contents for VideoHome Technology AV AirPro
- Page 1 AV@AirPro Quick Installation Guide 1. Package Contents 2.4GHz audio/ video transmitter x 1 2.4GHz audio/ video receiver x 1 Infrared (IR) eye cable x 1 Remote antenna x 1 Antenna x 2 Power adapters (DC 6V) x 2 Audio/ video cables x 2 User’s manual x 1 2.1 Transmitter Power switch : Power ON/OFF AV@AirPro.
- Page 2 2.2 Receiver Power switch : Power ON/OFF AV@AirPro. CH : Channel selection. CH LED : Channel indicator. IR : IR receiver. Antenna : Connect Antenna to “ANT” of Receiver ANT : Antenna connection. A-out : audio output to TV. V-out : video output to TV. DC 6V : power in.
- Page 3 2.3 Diagram NOTE: Make sure AV@AirPro and all connection devices(e.g.DVDplayer, TV) are all power off before Installation 3.1 Transmitter connection: 3.1.1 Connect Antenna to “ANT” 3.1.2 Connect RCA video/audio cable from external device (e.g. DVD player) AV out to “AV@AirPro” (V-IN and A-IN). 3.1.3 Connect Infrared (IR) eye cable to “IR LED”...
-
Page 4: Troubleshooting
3.3.3 Turn on Input device(e.g. DVD player) and TV. 3.3.4 Now the video from external device (e.g. DVD player) will display on TV screen. 3.3.5 Adjust Transmitter and Receiver antenna to make best transmission. 4. Troubleshooting If you are not getting any signal at all Check that the transmitter and receiver are properly connected to the A/V device from which you want to send/receive the A/V signal.