Summary of Contents for STL N-440
-
Page 1: User Manual
5-Speed Multi-Gigabit Network Card User Manual Ver. 1.00 All brand names and trademarks are properties of their respective owners. -
Page 2: Table Of Contents
Contents: Chapter 1: Introduction ............3 1.1 Product Introduction ............ 3 1.2 Features ................ 3 1.3 System Requirements ..........4 1.4 Package Contents ............5 Chapter 2: Getting Started ..........5 2.1 Hardware Layout ............5 2.2 Hardware Installation ..........7 2.3 Driver Installation ............ -
Page 3: Chapter 1: Introduction
Chapter 1: Introduction 1.1 Product Introduction This 10Gbase-T network card (NIC) lets you add two RJ45 ports to your server or desktop computer and access your network at multiple speeds: 10G, 5G, 2.5G, 1G and 100Mbps. Compliant with IEEE 802.3u/ab/an and IEEE P802.3bz standards, the network card delivers a dependable way to upgrade or replace your existing network... -
Page 4: System Requirements
Up to 20Gbps (full duplex) bandwidth Up to 9K jumbo frame support Designed to meet PCI Express Specification Revision 3.0 Four lane (x4) PCI Express compatible with x4, x8 and x16 PCI Express slots 1.3 System Requirements Hardware The following system specs are recommended minimum ... -
Page 5: Package Contents
Windows 8.1 (64-bit) Windows Server 2012 R2 (64-bit) Windows 10 (64-bit) Linux 2.6.24 or later VMware ESXi 5.x/6.0 1.4 Package Contents 1 x 5-Speed Multi-Gigabit Network Card 1 x Driver CD 1 x User Manual Chapter 2: Getting Started 2.1 Hardware Layout Page 5... - Page 6 Link/Activity Indicator: When the LED is off, there is no link between the 10Gbase-T network card and the network When the LED is on, a link is established, but there is no traffic on the network Page 6...
-
Page 7: Hardware Installation
When the LED is flashing, there is traffic on the network to which the 10Gbase-T network card is connected Link Speed Indicator: When the LED is lit orange, a 10GBase-T link is established When the LED is lit green, a 1000Base-T link is established ... -
Page 8: Driver Installation
2.3 Driver Installation The following section shows you how to install 5-Speed Multi-Gigabit Network Card driver on different operating systems. 2.3.1 Installation for Windows Insert the provided CD into your disk drive. The CD-ROM will start automatically. The following screen will show up and please click “Install Driver”. - Page 9 Please click “PCIe 10G” to start the installation. *Note: Actual image may vary Follow the instructions on screen to install the driver. Page 9...
Need help?
Do you have a question about the N-440 and is the answer not in the manual?
Questions and answers