UNIVIEW IPSAN Series Quick Manual page 3

Safety Symbol
Safety Information
WARNING!
Installation and removal of the unit and its accessories must be carried out by qualified personnel.
You must read all of the Safety Instructions supplied with your equipment before installation and
operation.
Warnings:
If the product does not work properly, please contact your dealer or the nearest service center.
(We shall not assume any responsibility for problems caused by unauthorized repair or
maintenance.)
To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture.
This installation should be made by a qualified service person and should conform to all the
local codes.
Please install blackouts equipment into the power supply circuit for convenient supply
interruption.
The separate earthing terminal must be permanently connected to earth.
For AC supplied model: The plug‐socket combination must be accessible at all times as it serves
as the main disconnecting device.
Before the power cable is installed or removed, the power must be turned off.
To avoid heat accumulation, good ventilation is required for a proper operating environment.
Improper use or replacement of the battery may result in hazard of explosion. Please use the
manufacturer recommended battery type.
Caution: Fiber optic ports – optical safety.
Never look at the transmit laser while the power is on. Never look directly at the fiber ports and
the fiber cable ends when they are powered on.
Caution: Use of controls or adjustments to the performance or procedures other than those
specified herein may result in hazardous laser emissions.
Generic alarm symbol: To suggest a general safety concern.
ESD protection symbol: To suggest electrostatic-sensitive equipment.
Electric shock symbol: To suggest a danger of high voltage.
Description