Blichmann BeerGun Assembly Operation Maintenance Manual

Bottle filler

Advertisement

Quick Links

Congratulations on your purchase, and thank you for selecting the BeerGun® bottle filler from Blichmann
Engineering™. We are confident that it will provide you years of service and many gallons of outstanding beer.
This manual will familiarize you with the assembly, operation, and maintenance of the BeerGun® bottle filler.
The patented BeerGun® is the lowest foaming and lowest oxygen pickup filler on the market achieving
dissolved oxygen levels as low as massive automated commercial bottle fillers! Rest assured that your beer will
stay as fresh as the big craft breweries beer!
**** PLEASE READ THOROUGHLY PRIOR TO USE FOR IMPORTANT SAFETY INFORMATION ****
Sections labeled "Warning" can lead to serious injury or death if not followed. Please read
Warning:
these thoroughly and understand them completely before use. If you do not understand
them or have any questions, contact your retailer or Blichmann Engineering™
(www.BlichmannEngineering.com) before use. Do NOT at ANY time operate the product
until you thoroughly read and understand these instructions!
Caution:
Sections labeled "Caution" can lead to equipment damage or unsatisfactory performance of
the equipment. Please read these sections thoroughly. If you have any questions, contact
your retailer or Blichmann Engineering™ (www.BlichmannEngineering.com) before use.
Important:
Sections labeled "Important" are critical to the proper performance and life of the product.

Assembly:

The BeerGun® comes fully assembled. However, prior to use it is recommended to disassemble for cleaning and
sanitizing.
Blichmann Engineering, LLC 2016 BeerGun Owners Manual NEW-V1
For replacement parts visit blichmannengineering.com
BeerGun®
Bottle Filler
Assembly, Operation & Maintenance
IMPORTANT!!
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BeerGun and is the answer not in the manual?

Questions and answers

Summary of Contents for Blichmann BeerGun

  • Page 1 Sections labeled “Important” are critical to the proper performance and life of the product. Assembly: The BeerGun® comes fully assembled. However, prior to use it is recommended to disassemble for cleaning and sanitizing. Blichmann Engineering, LLC 2016 BeerGun Owners Manual NEW-V1...
  • Page 2 Storage case BE-000941-00 Note: The BeerGun® requires two outlets on your CO tank as shown in Figure 9 below. Either a dual regulator or a “Y” fitting setup will suffice. Regulators and “Y” fittings are not included with the product, but are available through your retailer.
  • Page 3 Fig. 6 Step Five: Pull the beer trigger over the top of the grip and snap the slot into the groove of the beer tube. (Figure 6) Blichmann Engineering, LLC 2016 BeerGun Owners Manual NEW-V1 For replacement parts visit blichmannengineering.com...
  • Page 4 If you have a dual regulator setup, it is convenient to use one regulator to purge bottles at 15-20 PSI, and the other regulator to pressurize the To Keg keg for dispensing. To CO Valve Blichmann Engineering, LLC 2016 BeerGun Owners Manual NEW-V1 For replacement parts visit blichmannengineering.com...
  • Page 5 5 seconds to purge the oxygen out of the bottle. (Figure 11) TIP: The BeerGun® can be used to fill ANY depth of bottle since the tip of the filler does not need to be depressed to actuate the beer flow. Simply purge the bottle a little...
  • Page 6 Trouble-shooting The BeerGun® is a very reliable product with tens of thousands in use all over the world and has been used to help homebrewers and commercial breweries win countless competitions. Over the years we’ve found the following things to be the most common issues while using this product.
  • Page 7 A. Limited Warranty Blichmann Engineering warrants to the original purchaser that this product will be free from manufacturing defects in material and workmanship for a period of one (1) year from the date of purchase by the customer. Proof of purchase is required. Blichmann Engineering’s obligation to repair or replace defective materials or workmanship is the sole obligation of Blichmann Engineering under this limited warranty.

Table of Contents