Table of Contents
Advertisement
29FL91M
Front Panel
POWER
Press → On.
Press again → Off.
REMOTE CONTROL
SENSOR
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
Basic Remote Control Functions
POWER
Press → On.
Press again → Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons, you
can program your favorite programs by
using the 4 categories A, B, C and D. The
channels can be accessed quickly by using
these buttons.
VOLUME UP/DOWN
+
(
) Increases sound.
(—) Decreases sound.
• Changes or selects the TV
adjustments on On-Screen Display.
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
MUTE
Press → Mutes sound.
Press again → Restores sound.
• When sound is muted, CLOSED
CAPTION appears if available.
POWER (DVD/VCR)
Press → On.
Press again → Off.
DVD/VCR CONTROL
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
LOCATION OF USER'S CONTROL
VOLUME UP/DOWN
+
(
) Increases sound.
( —) Decreases sound.
INSIDE DOOR
VIDEO/AUDIO
TERMINALS
CHANNEL UP/DOWN
(') Selects next higher channel.
( " ) Selects next lower channel.
Infrared Transmitter Window
CATV/DVD-TV/VCR MODE buttons
Press TV/VCR → Signals sent will be for
TV and VCR control.
Press CATV/DVD → Signals sent will be
for cable TV converter and DVD control.
DISPLAY
Press → Displays receiving channel for
4 seconds.
Press again → Removes display.
• Temporarily displays receiving channel
when in Closed Caption mode.
INPUT
Press → Switches to external video
INPUT 1 mode.
Press twice → Switches to external video
INPUT 2 mode.
Press 3 times → Switches to external
video INPUT 3 mode or COMPONENT
mode.
Press 4 times → Switches back to the
original TV mode.
ENTER
Used in some instances where a Cable
Converter Box requires an "enter" command
after selecting channels, when using the
REMOTE KEYPAD button.
CHANNEL UP/DOWN
(') Selects next higher channel.
( " ) Selects next lower channel.
• Moves the "
screens.
SKIP/VCR-CH
REC
4
IN 2
" mark on the MENU
Advertisement
Table of Contents
