Panasonic KX-TGEA20C Installation Manual page 3

Battery installation/Battery charging
When the language selection is displayed after installing the batteries for the first
time, you can select your desired language.
MbN: Select the desired setting. a MSAVEN a MOFFN
Important:
R Use the supplied rechargeable batteries. For replacement, we recommend using
the Panasonic rechargeable batteries noted in the base unit's operating
instructions.
R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (
R Do NOT use Alkaline/Manganese/Ni-Cd batteries.
R Confirm correct polarities (
Charge for about 7 hours.
R Confirm "Charging" is displayed (
R When the batteries are fully charged, "Fully charged" is displayed.
R Model shown is KX-TGEA20.
Note:
R If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends (
charge again.
Registering a handset to a base unit
1
Base unit:
Press and hold MLOCATORN or MHANDSET LOCATORN for about 5 seconds.
R If all registered handsets start ringing, press MLOCATORN or MHANDSET
TGEA_TGHA20C(en)_1211_ver011.pdf3 TGEA_TGHA20C(en)_1211_ver011.pdf3
,
LOCATORN again to stop, then repeat this step.
3 3
, ).
2
).
1
) and the charge contacts with a dry cloth and
Installation
1
).
2
3
2013/12/11 2013/12/11 18:15:26 18:15:26