Related Manuals for JanSan JS-BP31
Summary of Contents for JanSan JS-BP31
- Page 1 Back Pack Vacuum OWNER’S MANUAL Model: JS-BP31 Distributed By: Po Box 14065 Merrillville, IN 46411 866-350-7160 www.JanSanMFG.com Doc #: 98-20015 Rev: 04/2011...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precaution should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE) WARNING- To reduce the risk of fire, electric shock, or injury: 1. Do not leave vacuum cleaner when plugged in. Unplug from outlet when no use and before servicing. -
Page 3: Precautionary Measures
Precautionary Measures Important: If the suction opening of the unit, the hose or the extension tubes are BlOCKED. Switch off the vacuum cleaner and remove the blocking substance before you start the unit again. 1.Before inserting the power plug 4. Do not pick up anything that is into the wall outlet, make sure that burning or smoking such as your hands are dry. - Page 4 GETTING TO KNOW YOUR BACK PACK VACUUM Ref # Part # Part Description Ref # Part # Part Description 50‐40083 Telescopic Tube Main Unit Waist Band Back Support Panel Exhaust Grill Waist Band Tool Carrier 50‐10030 On/Off Power Switch 50‐40084 Dusting Brush Canister Lid Tabs 50‐40085 Crevice Tool Waist Band 50‐40086 Blower Port Shoulder Straps 50‐40087 Pet Hair Remover 50‐40078 Back Board Panel 50‐40088 Floor to Carpet Brush 50‐40079 Carry Handle 50‐40089 Air Driven Turbo Brush Hose Inlet 50‐40090 Blower Attachments (×3)
-
Page 5: Assembling Your Vacuum
Operating Instructions Warning: To reduce the risk of electric shock, the power cord must be Disconnected before removing the dust bag, shake-out bag, Changing the filters or performing maintenance or trouble- Shooting checks. Assembling Your Vacuum 5 The cardboard face of the new bag should Cleaner rest securely in the dust bag cover guides Note: Always remove the power plug... - Page 6 Operating Instructions Attaching the Flexible hose to 3 To remove the telescopic tube from The vacuum the flexible hose, press on the telescopic The flexible hose should be tube release button and pull it out. connected to the vacuum before ( Fig.
- Page 7 Operating Instructions 2 Step on the floor to carpet selector Using the Air Driven Turbo Brush to adjust the height of the brushes. there are two(2) different heights Warning: To reduce the risk of electric shock , the one for floors and one for carpets. power cord must be disconnected before removing the (Fig.
- Page 8 Operating Instructions The blower attachments have air bleed 5.To blow up inflatable items, select holes.these air bleed holes help the appropriate size blower relieve some air pressure so that the attachment that will fit into the air attachment does not blow off. However, valve.(Fig.16) should an increase in air pressure be desired,simply cover one or more of...
- Page 9 Operating Instructions Warning: To reduce the risk of electric shock, the power cord must be disconnected before removing the dust bag, shake-out bag, changing the filters or performing maintenance or trouble- shooting checks. 4. Turn the unit on by pressing the 3.
- Page 10 Operating Instructions Warning: To reduce the risk of electric shock, the power cord must be disconnected before removing the dust bag, shake-out bag, changing the filters or performing maintenance or trouble- shooting checks. Cleaning & Replacing the Cleaning the HEPA Pre-Motor Shake-Out Bag Filter Note: Clean the shake-out bag out-...
-
Page 11: Environmental Tips
Environmental tips Once any electronic product is no longer functional, it should be disposed of in such a way as to cause minimum environmental impact, in accordance with the regulations of your local authority. In most cases you can take such products to your local recycling station. Parts Schematic Ref # Part #...