Advertisement
PRECAUTIONS
Curtain, door or the like objects will prevent the remote signal from
being received by air conditioner.
Do not get the interior of remote controller wet. It is forbidden to expose
it to direct sunlight or locate it in the place with high temp.
Malfunction may occur if infrared signal receiver on air conditioner is
exposed to sunlight. Please shelter the signal receiver from sunlight
with curtain.
Please remove the nearby electronic device for they may affect the
performance of remote controller.
Do not put the used or different batteries into the remote controller,
otherwise remote controller will fail to send signal.
Please remove the batteries before long period unused, otherwise the
remote controller may be damaged.
If pressing the button reset the remote controller, which indicates low
battery, please replace the batteries.
If no receiving sound is heard from indoor unit or
does not flash, please replace the batteries.
Effective transmitting distance of remote controller is 8m, please aim the
signal sending part to the receiver on air conditioner.
MODEL AND SPECIFICATION
Model
Rated voltage
Min voltage for sending signal of CPU
Effective receiving distance
Operation condition
1
PRECAUTIONS-MODEL AND SPECIFICATION
on remote controller
R05, RM05
3.0V(2 pieces of LR03 7# batteries)
2.4V
8m～11m
O
-5~60 C
Set TIME ON and TIME OFF simultaneously
1. Set TIME ON according to procedures 1 and 2 specified in
TIME ON operation.
2. Set TIME OFF as the procedures 1 and 2 specified in TIME
OFF operation.
3. If both the set time of TIME ON and TIME OFF not exceed
10 hours, time OFF operation will activated 0.5 hour later
than time ON operation. If both the set time of TIME ON and
TIME OFF exceed 10 hours, time OFF operation will be
activated 1 hour later than time ON operation.
4. 0.5s after setting, remote controller will send TIME ON
command to the unit.
Modification of timer operation
Press corresponding button and readjust the time of time
ON and time OFF. Adjust the time figure to 0.00 to cancel the
timer operation.
NOTE: The time set in timer operation is the relative figure
based on the clock on remote controller. Adjusting clock is
unavailable when TIME ON or TIME OFF is activated.
OPERATION INSTRUCTIONS
202055090766
R05/BGE-20
8
Advertisement
