Advertisement
Available languages
Available languages
Product no. 088-0559-4
Step 1
Requires A,B
Insert table legs (B) to table top (A) as shown below.
B
A
Step 2
Requires B,C,D,E,G
Place leg connector bracket (C) between four table legs (B). Attach
leg connector bracket (C) to table leg (B) by lining up the screw holes on
leg connector bracket (C) with corresponding screw holes on table leg (B).
Insertthe M6x23 screws (D) with at washer (E) and tighten it using allen wrench (G).
(* Reminder - Do not completely tighten screws now.) Repeat the same step to
secure all four table legs (B) to the leg connector bracket (C).
B
C
A
Step 3
Requires A,B,F
Insert the self-tapping screw (F) to the screw holes on the table top (A) with the
corresponding bolt holes on the table leg (B), tighten it using screw driver. Repeat
this step until all four table legs (B) are secured to the table top (A).
Step 4
Now tighten all the screws. You can now enjoy your new table.
D
D
E
E
B
F
A
C
Advertisement
