Page 1
ON TIME ON TIME All the parts included in this document are the property of Indesit Company S.p.A. All rights reserved. This document and the information it contains are supplied without liability for possi- ble errors or omissions; no part of this document can be reproduced, used or copied without written permission or without being authorised by the terms of a contract clause.
Page 2
CONTENTS OF THE MANUAL: NOTE FOR THE ENGINEER This manual is a supporting document for technical personnel. It contains a description of the various product types, the general operating principle, and indications concerning assistance. Technical personnel should anyway consult the specific model on (www.servicenet.indesitcompany.com) to access data and updates of electrical diagrams, techni- cal bulletins, and spare parts.
1. TYPOLOGY OF PRODUCT: 1.1. LEGEND: L 1000 OT (EU) Washing Machine Dimensions: Interface: Spin speed; (rpm): On Time Country: Indesit 1000 EU Europe S Slim 40 cm UK England 1200 X 60 cm 1400 1.2. INTERFACE: DOOR LED Detergent dispenser...
1.3. TECHNICAL FEATURES: MODEL: WIL 1000 OT Capacity: da 1 a 5 Kg Dimensions: Width: 59,5 cm Height:: Depth: 52,5 cm Water supply: Maximum pressure: Minimum pressure: 0,5 bar Drum capacity litri Power supply: Tension: 220/230 volt. 50 Hz Potenza massima assorbita: 1850 Watt.
2. FUNCTIONING: 2.1. BUTTONS AND WASH FUNCTION: ON/OFF button: It is used to switch on/off the machine. START/RESET button: It is used to start a cycle after having set the mate- rial and the time desired or to interrupt a program in progress.
PROGRAM selector: This knob is used to choose the type of material to wash and it can be turned clockwise and anticlock- wise indifferently. During the wash, the knob does not turn. TIME knob: It is used to set the duration of a program. The following settings are possible: - Positions “30 min.
2.2. PROGRAMS: 2.2.1 HOW TO SET A PROGRAM: To set a program (wash cycle), follow the instruc- tions below: 1. Choose the material to be washed by turning the knob clockwise or anticlockwise. 2. Set the time the wash should end by turning the time knob clockwise or anticlockwise.
2.2.3 PROGRAMME TABLES Material / Type of Times Programs load temperature Detail of the wash cycle dirt. (Kg) Wash, rinses, intermediate and final spins White cotton Wash, rinses, intermediate and final spins Coloured cotton Delicate/ Wash, rinses, intermediate and final spins Dark cotton Synthetics Wash, rinses, soft spin...
4. TECHNICAL ASSISTANCE: 4.1. DEMO MODE: Demo Mode is not available in these models. 4.2. AUTO TEST: The washing machine On Time lets the user know the occurrence of a Fault through a quick flash of the DOOR LOCK LED, but it does not show the fault code on the control panel. To visualize the type of fault, it is necessary to start Auto Test, using the Hardware Key, whose display shows the code of the fault occurred.
4.3. FAULT ANALISYS AND SOLUTIONS: On Time washing machine warns the user of the presence of a fault by a quick flashing of the DOOR LOCK LED, but its control panel does not display the fault code. To read the fault code it is necessary to start Auto Test, using the hardware key which visualizes the fault code.
Page 13
FAULT CAUSE CHECK-UP - Check the efficiency of the contacts of J3 connector on the board; - Check on J3 connector, pins 5 and 6 the continuity of the wash heater. The heater is of 1800W 230V and has a value of 25 ; No absorption of the wash - Check pressure switch, connector J3 pins 2 and 3: there must be no heater (signalled only with...
4.4. DOCTOR: The main board is installed on the back part, on the right. The interface, protected by a cover, allows the connection of the hardware key to the machine: * Connect the handheld to the hardware key; * Follows the instruction in the “WM DOCTOR” manual.
Page 15
PROBLEM ANALISYS - Wrong wash temperature It does not wash well - Lack of a detergent - The program selected is not the right one - Too much detergent Presence of foam at the - Faulty drain end of the wash - The presence of foam is normal, because of zeolites - Unbalanced load - Check bearing...
5. EXPLODED VIEW: CABINET. Handle the display board with care. Please do not bend it. Rif. Item Rif. Item 000 HANDBOOK IT 017 HOLE CAP FOR CABINET 001 ASSY MODULE LED 2 KNOBS EDG IND.EVOII 018 SCREW M4,5 X 11 TIMER AND DOOR/HINGE 002 BLUE ON-OFF BUTTON 018 WHITE BLACK PANEL PW 003 BLUE START BUTTON...
Page 17
DRUM ASSEMBLY. Rif. Item Rif. Item 001 SCREW M8X23 TEFL’AL68X’ 013 PIPE-CLIP 34,6-36,4 002 CONIC-DUCT PULLEY D=280MM H= 17MM 014 PIPE-CLIP BAND DRAIN PUMP SIDE 003 UPPER COUNTERWEIGHT VPL EVO2 15KG 015 TANK-PUMP OKO TUBE EVIZZATE AND EVO II 004 FIXING SCREW FOR COUNTERWEIGHT/TANK 017 EXPANDER’W405PWF’...
Page 18
028 MOTOR TACHOMETRIC CESET 6170 A0939 004 SPIR. BENT DRAIN TUBE - PUMP SIDE L1860M 030 EEPROM WIL1000OT EVOII SW 28344710100 010 PRESSURE SWITCH SUPPORT ‘INDESIT’ 031 HEATER 1700/230 VPL 012 ADDITIVES COVER ‘WIXL126IT’ 032 TEMPERATURE SENSOR NTC ELTH TL PH2001 013 LINEAR DETERGENT DRAWER EVIZZ.
Page 19
WIRING DIAGRAMS. Wrap up well the new connector applied in insulating tape together with the wiring of the appliance checked. GENERAL CODE 093722 GENERAL C1(WM) C3(WD) = EVL + EVP CODE 093713 GENERAL C4(WD) = EVL + EVP + EVC CODE 109950 GENERAL D = MICRO DOOR LOCK + IP CODE 093714 GENERAL N = MOTOR + PUMP CODE 093719 GENERAL D1 = MICRO DOOR LOCK CODE 093715...
6. WASH PROGRAM TABLE: MATERIAL NUMBER OF RINSES Cotton Synthetics Wool Delicate Special Sport* 2 (2 in ciclo 30') RINSES The maximum number of rpm, according to the model The pre-wash is available only on the cycle “auto”. Service Manual Edition Language WM ONTIME - 2005...