Display: „LO BAT“ Battery change is required. Please replace with new 9-V- block battery. Press the red “Set” button near the battery then. On/Off-button The EC 3000 has properly been calibrated during the Measurement production process range button carefully checked before delivery.
Page 4
Flory Basis 7 3,20 4,00 Florymonid flüssig EC/I Duisburger Str. 44 D-90451 Nürnberg Tel: ++49 (0) 911 96 26 05-0 Fax: ++49 (0) 911 96 26 05-9 e-mail: info@stepsystems.de All rights reserved. www.stepsystems.de Printed in Germany STEP Systems GmbH 2016...
Page 5
Gabi Plus Z Schwefels.Ammoniak Kalisulfat Monokaliumphosphat 14,5 Kalksalpeter Duisburger Str. 44 D-90451 Nürnberg Tel: ++49 (0) 911 96 26 05-0 Fax: ++49 (0) 911 96 26 05-9 e-mail: info@stepsystems.de All rights reserved. www.stepsystems.de Printed in Germany STEP Systems GmbH 2016...
Page 6
FERTIPLANT Jungpflanzenstarter FERTIPLANT Phosphor-Booster FERTIPLANT Topfpflanzen Spezial 10,5 Duisburger Str. 44 D-90451 Nürnberg Tel: ++49 (0) 911 96 26 05-0 Fax: ++49 (0) 911 96 26 05-9 e-mail: info@stepsystems.de All rights reserved. www.stepsystems.de Printed in Germany STEP Systems GmbH 2016...
Page 7
11,2 Kristalon Acid weiß 11,4 Kristalon Acid gelb Duisburger Str. 44 D-90451 Nürnberg Tel: ++49 (0) 911 96 26 05-0 Fax: ++49 (0) 911 96 26 05-9 e-mail: info@stepsystems.de All rights reserved. www.stepsystems.de Printed in Germany STEP Systems GmbH 2016...
Page 8
Instruction manual EC 3000 Determination of substrates’ salinity Take a representative substrate sample Thoroughly stir the substrate in order homogenise the sample Determination of salinity in homogenised sample (see icons 1-8) Cylindrically Fill sample loosely compress Remove paper enwrap the enclosed 100 above the top of the cup.
Page 9
0.47 EC 1,50 per mil Duisburger Str. 44 Tel: ++49 (0) 911 96 26 05-0 All rights reserved. Fax: ++49 (0) 911 96 26 05-9 Printed in Germany. D-90451 Nürnberg STEP Systems GmbH 2004 e-mail: info@stepsystems.de www.stepsystems.de...
Need help?
Do you have a question about the EC 3000 and is the answer not in the manual?
Questions and answers