Advertisement
Quick Links
Advertisement
Summary of Contents for FlexiDrive MV-USB
- Page 1 FlexiDriveMV-USB User Guide...
- Page 2 One unit FlexiDriveMV-USB. One unit USB Pendrive Getting Started What I have to do? You have to complete these simple steps to use your new FlexiDrive unit. Step # Step Description / Why? Install WinImage WinImage allows creating and working with your disks.
- Page 3 Press Next for the Welcome Window Press Next for the Registration Window (Registration is not necessary to use WinImage with the FlexiDrive products) Accept the License Agreement and press Next Select the Destination Folder ( using default is recommended ) and press Next...
- Page 4 Create your set of disks You can create the “image files” of all your existing floppy disks. An Image file .ima is a digital copy of your floppy disk in order to be used in the FlexiDrive unit. WARNING: Don’t try to copy your files directly to the USB Pendrive . That will not work.
- Page 5 Optional FPC 26. Turn off your machine/equipment. Dismount your old Floppy Drive Unit. Install the FlexiDrive in the same place by using the same connectors. 4 Pin Power connector (Red cable +5vcc close to the data connector) don’t invert. 34 Pins Data cable connector...
- Page 6 Loading a Disk Now you must select which disk you want to work with on your machine/equipment. Insert the USB Pendrive in the FlexiDrive. Select the disk using the scroll keys up or down. i.e.: DISK01.IMG, DISK02.IMG, MACHINE-1.IMG.. Disk icon...
- Page 7 Now, your disk is mounted on the FlexiDrive and is ready to use. Use your machine/ equipment like always. (Open a file, program, load some parameter, etc..) Try to read some files from the “disk .ima or .img files” in the USB Pendrive. Perform reading functions to test that it’s working correctly.
- Page 8 Then press OK. Loading…. Now your disk is mounted on the FlexiDrive and is ready to use. Use your machine/ equipment like always. (Open a file, program; load some parameter, etc...) If you need more information or Support contact us to: support@floppyemulator.com...