CE INFORMATION The product must be installed according to the currently valid installation regulations for EMC to guarantee the designed use and to prevent EMC problems. The device supplied with this manual is according to the EC, EMC Directive, 2004/108/EC, LVD 2006/95/EC and RoHS 2011/65/EU SAFETY PRECAUTIONS 1.
Page 5
When replacement parts are required, be sure that the service technician uses components specified by the manufacturer which have the same characteristics as the original parts. UNAUTHORIZED SUBSTITUTIONS MAY RESULT IN FIRE, ELECTRICAL SHOCK OR OTHER HAZARDS. Upon completion of any service or repairs, ask the technician to perform safety checks to determine that the equipment is in safe operating condition.
1. Scope This specification is used to define the performance of XLCD series color TFT LCD (LED Backlit) monitor. This system also supports both video input and PC input. In video input mode, the system can automatically detect the NTSC signal and PAL signal. In PC mode, this system can support up to 1920 x 1080 VESA standard.
Page 7
2.5 Environmental Temperature Operating: 0 C to +40 Storage: -20 C to +60 Humidity Operating: 10% to 85% (non-condensing) Storage: 10% to 95% (non-condensing) 2.6 EDID This series of displays support EDID, but does not support DDC2B function. 2.7 Connectors H G F A.
3. Controls and indicators A. “i” Channel button Press the button to select input signal. B. “-“ / “+” buttons Press the buttons to scroll the cursor to desired function. Press the buttons to adjust the value of selected function in sub OSD menu. C.
4. OSD Menu OSD Menu structure Use the CHANNEL button to select VGA, DVI, S-VIDEO, or AV CVBS , the menu structure within each varies, refer to sections below on how to set-up each option. PC mode: VGA and DVI Press the Menu button to bring up the MAIN MENU Page.
Page 10
COLOR ADJUST - / + 1. Press buttons to select an icon 2. Press MENU button to select item, - / + 3. Press buttons to adjust the value 4. Press MENU button to return 5. Press Input button (i) to return the MAIN MENU Page. AUTO COLOR Press MENU buttons to auto adjust the color CONTRAST Adjust the contrast value BRIGHTNESS Adjust the brightness value...
Page 11
IMAGE ADJUST - / + 1. Press buttons to select an icon 2. Press MENU button to select adjust item - / + 3. Press buttons to adjust the value 4. Press MENU button to return 5. Press Input button (i) to return the MAIN MENU Page. AUTO ADJUST Press MENU buttons to auto adjust the image H.
Page 12
AUDIO ADJUST 1. Press MENU button to select adjust item - / + 2. Press buttons to adjust the value 3. Press MENU button to return 4. Press Input button (i) to return the MAIN MENU Page. VOLUME Adjust the audio volume...
Page 13
SETUP OSD - / + 1. Press buttons to select an icon 2. Press MENU button to select adjust item - / + 3. Press buttons to adjust the value 4. Press MENU button to return 5. Press Input button (i) to return the MAIN MENU Page. LANGUAGE Press MENU buttons to change the language H.
Page 14
SYSTEM RESET 1. Press MENU button to adjust item. 2. Press Input button (i) to return the MAIN MENU Page. RESET Brightness, Contrast, Volume, Image and OSD Horizontal/Vertical position, OSD Timer, OSD Translucence and OSD zoom return to default Value.
Page 15
DVI MODE: - / + 1. Press buttons to select an icon. 2. Press MENU button to select item. - / + 3. Press buttons to adjust the value 4. Press MENU button to return. 5. Press Input button (i) to return the MAIN MENU Page. PICTURE MODE Select the image mode ( User, Standard, Dynamic, Soft).
Page 16
Video mode (CVBS and S-Video): Press the Menu button to bring up the MAIN MENU Page. The following page will appear - /+ Press buttons to select an icon, then Press MENU button to change the values in the sub menu. COLOR ADJUST 1.
Page 17
AUDIO ADJUST 1. Press MENU button to select adjust item 2. Press - / + buttons to adjust the value 3. Press MENU button to return 4. Press Input button (i) to return the MAIN MENU Page. VOLUME Adjust the Audio volume...
Page 18
SETUP OSD - / + 1.Press buttons to select an icon 2.Press MENU button to select adjust item - / + 3.Press buttons to adjust the value 4.Press MENU button to return 5.Press Input button (i) to return the MAIN MENU Page. LANGUAGE Press MENU buttons to change the language.
Page 19
SYSTEM RESET 1. Press MENU button to adjust item 2. Press Input button (i) to return the MAIN MENU Page. RESET Brightness, Contrast, Volume, Picture Mode, saturation, hue, Sharpness, OSD Horizontal/Vertical position, OSD Timer, OSD Translucence and OSD zoom returns to default Value.
5. Regulatory Agency 5.1 Safety Approvals This series design shall meet the standards of the following LVD standard LVD COMPLIANCE : EN 60950-1:2006+A11:2009+A1:2010+A12:2011 5.2 EMI/EMS Emission Approvals This series design shall meet following EMI/EMS specifications: EMC COMPLIANCE: EN55022:2010+AC:2011 class A, EN55024:2010, EN50130-4:2011 5.3 RoHS Approvals This series design shall meet following RoHS specification RoHS Compliance: 2011/65/EU...