Subscribe to Our Youtube Channel
Related Manuals for Meicheng MX-1004VW
Summary of Contents for Meicheng MX-1004VW
-
Page 1: Matrix Switcher
® Meicheng MX-1004VW HDMI 4 x4 Mixed Inputs Seamless Matrix Switcher User’s Manual http://www.meicheng.com.tw... - Page 2 1. Introduction is a high-performance with seamless switching output and mixed input 4x4 matrix MX-1004VW switcher, 4 mixed input to support digital video signals and analog video signal, and 4 outputs with seamless switching function, seamless switching mode: fast switching, fade in/fade out, blinds and so on.
-
Page 3: Package Contents
3. Package Contents HDMI 4 x4 mixed inputs seamless matrix switcher 1pcs 12V/2.5A DC power adaptor 1pcs Operation Manual 1pcs Wideband IR Transmitter cable 4pcs Wideband IR Receiver cable 5pcs IR Remote for Mixed Matrix 1pcs Mounting ears 2pcs RS-232 cable 1pcs 4. -
Page 4: Panel Functions
5. PANEL FUNCTIONS 5.1 Front Panel LCM: Displays the information of each input and output setting and EDID management. IR: IR Receiver window (accepts the remote control signal of this device only). POWER: Press the button to control power on/off. The LED will illuminate green when the power is on, red when it is in 'Standby' mode. - Page 5 EDID, what is it and what is it used for? Under normal circumstances, a source device (digital and analog) will require information about a connected device/display to assess what resolutions and features are available. The source can then cater its output to send only resolutions and features that are compatible with the attached device/display.
- Page 6 5.2 Rear Panel IR Channel IR EXT: if the panel sensor is obstructed or the unit is installed in a closed area out of infrared line of sight, the IR RX receiver included can be inserted into the IR EXT port at the rear to extend the IR sensor range and enable local control of the matrix.
-
Page 7: Hdmi Input
OUTPUT The HDMI OUTPUT connects to TVs equipped HDMI. HDMI INPUT Connect to the HDMI input source devices such as a DVD player or a Set-top Box with HDMI cable. DC POWER INPUT Plug the 12V/2.5A DC power supply into the DC12V power in. 6. -
Page 8: Ir Control System
7. IR Control System At Matrix end: Insert the 3.5mm jacks of the IR TX Emitters included with the unit into the IR TX Emitter ports at the rear of the matrix according to input. The IR signal is added to the HDMI of the input device so, for example, if the user is watching Blue-ray on input 1, the IR signal will be directed through the IR TX1 socket to control the device. -
Page 9: Installation
8. PC controller user guide Installation Matrix controller is a Green Software. Just copy MatrixController.exe to PC which is used to control the Matrix by RS-232 COM port or TCP/IP to complete installation. Preparation Connect PC and Matrix by RS-232 cable (headers of both sides of cable should be FEMALE) or TCP/IP(local area network) ... -
Page 10: General Page
How to control Matrix “General” page 1. Select RS-232 COM or TCP mode 2. Select RS-232 COM port 3. Click to connect or disconnect PC and Matrix 4. Select Matrix IP 5. Connect to Matrix IP 6. Search Matrix IP 7. - Page 11 Configure TCP After action of 7, edit form will pop-up as below: 1. Select auto or static IP 2. Rewrite the Matrix IP 3. Rewrite the Matrix MAC The Multi-viewer mode The Multi-viewer mode has a variety of display modes. All the display modes as below: Detailed operations: While the PC software is running normally, click on the button , via the mode of the drop-down box...
- Page 12 Picture outside Picture (POP) Displaying Mode 1: Mode 2: Mode 3: - 11 -...
-
Page 13: Picture In Picture (Pip) Displaying
Picture in Picture (PIP) Displaying Mode 4: The video wall mode Detailed operations: While the PC software is running normally, click on the button .In this area; users can set the bezel size of the adjacent images in zoom-in model, to make the whole image looks coherently. - Page 14 Diagram of Video Wall Displaying 4x Zoom-in: It means matrix switcher is able to zoom in the input image and spilt to 4 parts, and then full-screen display on the output displayers one to one. “EDID control” page 1.
- Page 15 “Matrix” page 1. LED which display Input number for respective Output 2. Click to select Input port for respective Output port 3. Click to select previous or next Input port for respective Output port 4. Click to select the seamless switching output mode 5.
-
Page 16: Connection And Installation
The pictures on the user manual are just for reference, and there may be some slight difference with the real products. Meicheng reserve the rights to make changes without further notice to a product or system described here in to improve reliability, function or design.
Need help?
Do you have a question about the MX-1004VW and is the answer not in the manual?
Questions and answers