Retrieve Codes; View Results; View Live Data; Perform Additional Tests - Matco Tools FixAdvisor MD75 Quick Reference Manual

This guide contains abbreviated "Quick Reference" procedures for the
FixAdvisor™ Scan Tool. Please visit matco.carscan.com to download a

Retrieve Codes

Connect the Scan Tool to the vehicle's test connector.
Turn the ignition key "On." DO NOT start the engine.
The tool will automatically link to the vehicle's computer.

View Results

The Scan Tool retrieves stored codes, Freeze Frame
data and System Status.
Codes, I/M Monitor Status and Freeze Frame data are
displayed on the Scan Tool's display screen. System
Status is indicated by LED indicators.
If a recommended solution for the "priority" DTC is
available, the FixAssist® screen for the DTC displays. The
screen shows recommended inspection and repair actions
to correct the malfunction that caused the DTC to be set.
If more than one DTC was retrieved, press and release
the DTC/FF button, as necessary. Freeze Frame Data (if
available) will be displayed after the Priority Code by
pressing the DTC/FF button.
In the case of long code definitions, or when viewing
Freeze Frame Data, use the UP
buttons, as necessary, to view the additional information.
To view OEM Enhanced DTCs (if available), press the
SYSTEM
OEM Enhanced mode provides the ability to retrieve OEM
enhanced DTCs and Anti-Lock Brake System (ABS)
DTCs from most Chrysler/Jeep, Ford/Mazda, GM/Isuzu,
Honda/Acura and Toyota/Lexus vehicles.

View Live Data

Place the Scan Tool in "Code Retrieval" mode. Start the
engine.
Press and release the LD button to place the Scan Tool in
"Live Data" mode. Real-time Live Data (PID) information
supported by the vehicle under test displays.

Perform Additional Tests

While linked to a vehicle, press the M button. The Main
Menu displays. Use the UP
necessary, to highlight System Tests, then press the
ENTER button. The System Test Menu displays. Use
the UP and DOWN
light the desired option, then press the ENTER
You can use the Scan Tool to perform additional diagnostic tests (O2 Sensor
Test, Non-Continuous Test, EVAP Leak Test).
copy of the complete Owner's Manual.
button; the System menu displays. The
and DOWN
buttons, as necessary, to high-
and DOWN
buttons, as
button.
1