Table of Contents
Advertisement
MYLOS
Building Automation
®
5
Event management
Events are temporal programs that allow you to send telegrams based on the input status.
An event can also activate a SCENE.
The MYLOS Building Automation system allows you to set up to 8 different temporal programs; for each program it
is possible to choose which days of the week should be activated and for each day it is possible to set a temporal
program.
The management of events occurs via the EVENTS menu. It is therefore necessary to access this
menu before proceeding.
5.1
Activating an event
The first operation to be performed is enabling a program or not:
1) Select a program (ex. PROGRAM 1) and press OK;
2) Select ENABLED and press OK;
3) Select ON to enable it, the symbol "" indicates that the function is active;
4) Press EXIT to go back to the previous menu;
PROGRAM 1
PROGRAM 2
PROGRAM 3
PROGRAM 4
Exit
OK
0
5.2
Time function management
Through the TIME function, in logic AND with the inputs (if enabled), it is possible to enable a temporal program or not.
1) Select TIME and press OK;
2) Select ENABLED and press OK;
3) Select ON to enable the temporal program.
4) Press ESC to go back to the previous menu;
ENABLED
INPUTS
TIME
OUTPUT
Exit
18 Event management | MYLOS
®
ENABLED
INPUTS
TIME
OUTPUT
Exit
OK
0
OK
0
1
Building Automation
Event management
OFF
ON
Exit
1
ENABLED
PROGRAM
Exit
OK
0
1
ENABLED
INPUTS
TIME
OUTPUT
OK
Exit
0
OFF
ON
Exit
OK
0
OK
Advertisement
Table of Contents
