Table of Contents
Advertisement
Quick Links
Troubleshooting
Repeater service alerts are managed in the overlock management software.
In the software, go to T ools\Manage Repeaters to view and clear alerts.
Low Battery Indication
The battery power on the R1000 repeater is supervised by the Overlock
Management Software. A low battery indication will generate an alert in
the software, notifying the administrator .
For Technical Support Please Call:
1-888-528-7826
www.chamberlainaccess.com
© Chamberlain Access Solutions
1 14A3884
All Rights Reserved
6
ACCESSMASTER T1000 TRANSCEIVER
AND
ACCESSMASTER R1000 REPEATER
INSTALLATION MANUAL
Advertisement
Table of Contents
Related Manuals for Chamberlain ACCESSMASTER R1000
Summary of Contents for Chamberlain ACCESSMASTER R1000
- Page 1 The battery power on the R1000 repeater is supervised by the Overlock Management Software. A low battery indication will generate an alert in the software, notifying the administrator . ACCESSMASTER T1000 TRANSCEIVER ACCESSMASTER R1000 REPEATER INSTALLATION MANUAL For Technical Support Please Call: 1-888-528-7826 www.chamberlainaccess.com...
- Page 2 • ACCESSMASTER T1000 Mounting the R1000 Carton Inventory Prior to mounting the repeater, write down the serial number of the device. This number will be needed during programming. Use the following • guidelines when mounting the repeater. Mount the unit within 50 ft of a power source Mount the unit in an area protected from the weather Mount the unit as high as possible on the site...
- Page 3 ACCESSMASTER R1000 R1000 Overview Communication Connections The R1000 repeater can be added to the T1000 system to extend the Comm range of the T1000 transceiver up to 500 ft, depending on the conditions of the site. The R1000 repeater provides a secure, reliable wireless mode...
-
Page 4: Mounting The Transceiver
Installing Multiple Transceivers Power and Communication from the Transceiver to the XT On large sites, multiple transceivers may be required to provide adequate Power from the controller to the transceiver is provided via RS422 (18 communication coverage. Up to 8 transceivers can be installed on one site AWG, single-pair, stranded, tinned copper) using 12 VDC.
Need help?
Do you have a question about the ACCESSMASTER R1000 and is the answer not in the manual?
Questions and answers