Neorest YB990 Installation Manual page 5

YH990 Robe Hook
1. place the mount against the wall
and mark drill points. open 1/4"
(6mm) in diameter., over 1-1/"
(40mm) deep holes for the wall
anchor
. Drill the holes for the provided
wall anchors. use pan head wall
screws to attach the mount. Make
sure mount is securely mounted
3. push the body onto the mount, use
body screws to secure the body
YP990 Paper Holder
1. hold the body against the wall
and mark drill points. open 1/4"
(6mm) in diameter., over 1-1/"
(40mm) deep holes for the wall
anchor
. Drill wall holes for the provided
wall anchors. hold the front long
driver to mount the body on the
wall with flat head wall screws to
fix the body. Avoid scarring the
body with tools
3. install the cover from below the
body. secure cover with provided
hex wrench and cover screws.
Wall screw position
3/4"
(20mm)
Wall Anchor
Mount
Pan Head Wall screw
Body screw
Body
Wall screw position
2" 4"
(50mm) (100mm)
Flat Head Wall Screws
<Front>
Cover screw
5
Wall hole
2"
(50mm)
Wall hole
Wall Anchor
Body
Cover