Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of local authorities. • If the power cord is damaged, it must be replaced by an BUFFALO agent or a recommended qualified technician in order to avoid a hazard. •...
• Grip handle BUFFALO prides itself on quality and service, ensuring that at the time of packaging the contents are supplied fully functional and free of damage. Should you find any damage as a result of transit, please contact your BUFFALO dealer immediately.
Switch On the power [I]. WARNING: NEVER use your hands to secure the meat when slicing. Holding the carriage and grip handles, push the carriage backwards and forwards across the blade. WARNING: The blade starts immediately. After slicing the desired amount press the Off [O] button to turn Off the appliance. WARNING: The blade continues to turn for a few seconds after switching off.
Page 5
Blade removal tool Replace the blade and cover, ensuring the blade securing bolt is securely tightened. Note: BUFFALO recommend the use of cut-resistant or wire mesh gloves when cleaning the blade. Sharpening the Blade Note: Always clean the edge of the blade before sharpening.
The unit is not working The unit is not switched on Check the unit is plugged in correctly and switched on Plug and lead are damaged Call BUFFALO agent or qualified technician Fuse in the plug has blown Replace the plug fuse Power supply...
BUFFALO. Every effort is made to ensure all details are correct at the time of going to press, however, BUFFALO reserve the right to change specifications without notice.
EN 61000-3-2:2006 EN 61000-3-3:2008 AS/NZS60335.1:2002+A1,A2,A3 IEC 60335-2-64:2000 +A13 EN 62233:2008 Producer Name Buffalo Producer Address Unit 2, 34-38 Anzac Ave, Smeaton Grange, NSW 2567 I, the undersigned, hereby declare that the equipment specified above conforms to the above Legislation and Standard(s).