Do you have a question about the DP436 and is the answer not in the manual?
Questions and answers
Summary of Contents for DP VIDEO DP436
Page 1
English Version CAR DVD/VCD/CD/MP3/MPEG-4 PLAYER WITH USB PORT DP436 Warning: Watching TV while driving is illegal in most states. There is a safety feature on this device which enables viewing videos only when parked. All other features may still be used while driving, such as audio and radio, etc, but must be done with care.
Contents Additional Information Simple Troubleshooting Guide Please double check the connections and installation procedure before using the checklist below. Cause/Solution Problem DVD/VCD/MP4 Before You Start No power. Check and make sure whether the fuse is blown, replace with the proper value if necessary. DVD/VCD/MP4 Setup Important Safeguards About this manual...
Page 3
Contents AUX Touch Screen Menu Press SOURCE on the remote or MOD on the main unit or AV-R on the screen to switch to the AV-R mode as follows: AV-R Slow Motion Play On Screen Display 36 Program Playing Eject an SD Card 36 VOL - VOL+ Eject a USB...
Tuner Before You Start IMPORTANT SAFEGUARDS About this manual RADIO MENU Local RADIO MENU Touching MENU in the monitor shows as follows: AREA RADIO MENU This unit features a number of sophisti- STEREO Be sure to connect the color coded leads LOCAL AREA according to the diagram.
Tuner Before You Start PRECAUTIONS MO/ST Selector EQ Setting During radio mode, you can press This unit can play the following discs only: While listening to popular music, classic button on the remote control to select MONO music, or rock music, you select the co- mode or mode.
Tuner Before You Start Maintenance Band Selector Listening to the radio During radio mode, repeatedly press the BAND button to select bands in the RADIO following order: Replacing the Fuse Make sure the amperage matches the 87.50MHz specified value when replacing the fu- (For Two Bands) ses.
CD/MP3/SD/USB Before You Start Program Playing Location of the Controls Pause the Playback During CD mode, press PROG, the TFT During CD/MP3/SD/USB playback, press displays the program menu. Press NUMBER to switch between play and pause. BUTTONS to select the track Number and Note: The Expanding then press...
Before You Start CD/MP3/SD/USB The Base Selecting Tracks Fast Selecting Track During MP3/SD/USB playback, press During CD playback, first press GOTO, to play the previous track, press to play and the TFT shows : disc go to:--:--, press your the next track. desired time of the playback by the num- During CD playback, first press ber buttons.
CD/MP3/SD/USB Before You Start CD/MP3/SD/USB Setup Stop Remote Control Previous track During CD playback, touching the screen shows the following menu: Next track Track region DISC DVD setup menu 01:18 Track 03/16 Mode selector MODE 01 Track Press this region and the screen 02 Track Track Region: 03 Track...
Page 10
Before You Start DVD/VCD/MP4 ---Preferences page-- SOURCE/PWR RDM (Playing Tracks at Random) (Pause/Play) GOTO (playing time/track) Default Example showing how to re-set loaded factory setting: (Stop Playing) BAND/TITLE (Press (Press , then press ENTER) ([F.R/ adjust frequency downwards]/ utomatically Memory --Preference Page-- --Preference Page-- AMS/MENU(A...
DVD/VCD/MP4 Before You Start Specifications ---Preferences page-- General AM Tuner Section Disc Menu Example showing how to set Disc Menu Language: Power Requirement Frequency Range 522-1620(KHz) 14.4V DC (Press (Press , then press ENTER) (11-16V allowable) (Optional) (Europe) --Preference Page-- --Preference Page-- 530-1710 (KHz) Load Impedance...
Installation DVD/VCD/MP4 Wiring Connection ---Preference page--- (Brown line with (Grey line with Subwoofer Video Out 2 brown head) yellow head) Reverse Video (Grey line with TV Type (Brown line with Example showing how to set TV type: Video Out 1 yellow head) Input yellow head)
Page 13
DVD/VCD/MP4 Installation --Dolby Digital Setup-- Install the Front Panel Detach the Front Panel Put notch (shown as picture) onto shaft Press button in the upper rightcorner, , and then slightly press into the right side. and then the front panel will be folded down. Dual Mono Example showing how to set stereo mode: (Press...
Installation DVD/VCD/MP4 Install the Unit --General Setup Page-- Bend these claws Captions Example showing how to set captions on/off: outward for a tight fit, if necessary. (Press , then press ENTER) (Press --General Setup Page-- --General Setup Page-- TV Display TV Display Wide Wide...
DVD/VCD/MP4 Installation Detach the Unit --General Setup Page-- 2.Insert the keys supplied to the unit at Detach the front panel before disassembl- both sides of the unit (shown as illustrat- ing the unit. F or more details regarding ed) until they click. Pulling the keys TV Display this section, r efer to...
Installation DVD/VCD/MP4 Cleaning the Connector Selecting Channel Selecting MENU Selecting Menu: During DVD mode, During VCD mode, repeatedly press the press MENU to return to the root AUDIO button to select from the following menu, all of the chapters will appear channels: If the connector between the main unit and the on the monitor.
Common Operations DVD/VCD/MP4 Setting the Playback Time To Select Source by Menu Turning the Unit On/Off Changing the subtitle language (Multi-subtitle) During DVD mode, press the GOTO button Briefly press PWR button to turn on the In any mode(except for DVD, SD, USB to set the playing time, when the TFT dis- unit, press and hold to turn it off.
Common Operations DVD/VCD/MP4 Slow motion playback On Screen Display Mode Selector Insert an SD Card During DVD mode, press the OSD button During DVD mode, press to slow Be sure the unit is off, then press Repeatedly briefly pressing the SOURCE and the display shows: play.
DVD/VCD/MP4 Main Menu Set up Main Menu Repeat Playing Press on the screen to adjust the Pause the Playback size, then press BACK to save the setting During DVD/VCD/MP4 playback, press During DVD playback, press RPT on and return to the previous menu. to switch between play and pause;...
Main Menu DVD/VCD/MP4 3.System Adjust Key Beep DVD/VCD/MP4 Setup Selecting Tracks Fast During DVD/MP4 playback, press After selecting SYSTEM, the sub menu will PREFERENCE During DVD/VCD/MP4 playback, touch appear as follows: to play the previous track, press the screen anywhere shows the following CLOCK SYS play the next track.
Need help?
Do you have a question about the DP436 and is the answer not in the manual?
Questions and answers