Table of Contents
Advertisement
43-007.fm Page 6 Wednesday, March 22, 2000 11:24 AM
INSTALLATION
SELECTING A LOCATION
You can place the ET-007 on a desk or
table, mount it on a standard wall plate,
or mount it directly on a wall. Choose a
location that is:
• near an AC outlet
• near a modular telephone line jack
• out of the way of normal activities
Note: Your ET-007 connects directly to
a modular telephone line jack. If your
phone line jack is not a modular jack,
you can update the wiring yourself, us-
ing jacks and adapters available at your
local RadioShack store. Or, you can let
the phone company update the wiring
for you.
Cautions:
You must use a Class 2
!
power source that supplies
9V DC and delivers at least
300 mA. Its center tip must be set to
positive and its plug must fit the ET-
007's
9V DC 300mA
plied adapter meets these specifica-
tions. Using an adapter that does
not meet these specifications could
damage the ET-007 or the adapter.
• Always connect the AC adapter to
the ET-007 before you connect it to
AC power. When you finish, discon-
nect the adapter from AC power be-
fore you disconnect it from the ET-
007.
6
CONNECTING THE
HANDSET
Plug the supplied coiled handset cord
into the jacks on the handset and the left
side of the corded phone.
Note: Your local RadioShack store sells
a variety of longer coiled handset cords,
which are especially useful when you
mount the phone on the wall.
PLACING THE BASE
TELEPHONE ON A DESK
jack. The sup-
1. Plug one end of the supplied modu-
2. Plug the modular cord's other end
3. Plug the supplied AC adapter's bar-
lar cord into the
TEL. LINE
the back of the base.
into a modular phone line jack.
rel plug into the
9V DC 300mA
back of the phone. Then plug the
adapter into a standard AC outlet.
300mA
jack on
on the
Advertisement
Table of Contents
