Page 1: Table Of Contents
Menu SUMMARY ............2 FUNCTIONAL DESCRIPTION ......4 The main menu interface and system settings ............4 Turn on/off and charge........ 5 The first time to use the trip computer ..6 Mode display description: ......9 Odometer and fuel consumption....13 Alarm prompt ..........
Page 2: Summary
SUMMARY The Trip-Computer is a versatile, all-round customer-facing vehicle information display terminal, by using the smart trip-computer, we can get all kinds of vehicle information, real-time monitor vehicle condition data, and can do timely and effective alarm of the vehicle abnormal condition.
Page 3 Operating system: Windows CE.Net 6.0 or higher CPU frequency: 600MHz System Memory: 128M SD card capacity: Display: 4.3 inch, 5 inch or 7 inch LCD touch screen - 3 -...
Page 4: Functional Description
Functional description The main menu interface and system settings After starting the smart trip computer, it will automatically enter the “MTC” software, the system first display the main menu interface, as shown in the figure below: Subsequently, the system will automatically start the "Smart Trip-computer”...
Page 5: Turn On/Off And Charge
the system setting interface, as shown below: “Information": Displays the software version of MTC. "Path settings": used to set the path of the “smart trip computer” software, “GPS” software and "Radar safety warning" software, to make a software boot start automatically, please check the back of the select box for reference "Language”: Select the language of the software.
Page 6: The First Time To Use The Trip Computer
other software. When smart trip computer software is running, if vehicle turned off, the smart trip computer will automatically shut down When smart trip computer in the normal use state, after MTC software started it will open the automatic charge function. When vehicle turned off, or in the main menu, select "exit"...
Page 7 The trip computer will scan the vehicle supported communication protocol automatically. After finish the scan, the trip computer will list out all the supported communication protocol and supported data stream items for this car, the user can choose the suitable commutation protocol, generally it should be choose with that item with high data stream.
Page 8 Then choose the user’s vehicle brand, and press “OK” button, the trip computer will display the car brand icon when the software start on. After use for the trip computer with some - 8 -...
Page 9: Mode Display Description
times, you can also recover the system to the factory setup status. The details way is: when start with software, after display with the vehicle brand icon, click with the bottom “Factory settings”, and click with “OK” later on When the trip computer is used in one car normally, if you want to change to use on another car, you must set it to the “Factory settings”.
Page 10 Under the idle mode, the system default show with bellowing data: water temperature, engine speed, battery voltage, current time, current date, current week, current location longitude and latitude, intake air temperature, Average Fuel consumption (History), Real-time Fuel consumption (Static). Cruise mode and Sport mode is a status of car driving display interface, as bellowing: - 10 -...
Page 11 Under the cruise mode, system default display with bellowing data: the running time of this driving, the average speed of this driving, water temperature, current time, speed, the mileage this driving ,the average fuel consumption of this driving , Real-time Fuel Consumption(Dynamic).
Page 12 Under the racing mode, system default will display bellowing data: vehicle speed, engine RPM, dynamic loads, accelerator position. The display data in difference mode can be set by the user voluntarily, the trip computer can supported with more than hundreds data. When setting the data, click the data block which you need to modify with contents, and press the data block for one second, then choose the data items...
Page 13: Odometer And Fuel Consumption
As the Car is driving or stop driving, the trip computer switch in idle mode and cruise mode or racing mode automatically, the user can select the display mode by clicking the button at the bottom of the screen. Odometer and fuel consumption The trip computer is capable of displaying a variety of fuel consumption data, such as the static - 13 -...
Page 14 real-time fuel consumption(L/h) in idle mode, dynamic real-time fuel consumption (L/100Km) in cruise mode, the average consumption from cumulative total, and cost of fuel of each time etc. By clicking the “Details” key, user is able to view fuel consumption data of this trip and cumulative history data.
Page 15: Alarm Prompt
These coefficients are proportional to fuel consumption. If consumption values to display inaccurate, can be adjusted based on actual fuel consumption. When adjusting data, first set the real-time fuel consumption display accurately; later use trip computer for a period time; thirdly record the actual average fuel consumption of vehicles;...
Page 16 time exceeds the setting time, it alarms to rest. Speeding alarm: when you over-speed the set speed. Shift reminding: to remind the driver to ascend to the next gear when the engine speed exceeds the set value; when the speed reaches the setting speed, the trip computer believes that the car has been traveling in top gear, no longer reminded.
Page 17: System Settings
System Settings Click on the "Set" button at bottom of the screen to enter the system settings. In the system settings interface, you can click the "Page Up" and "Page Down". Instrument settings Version information: view the software version of the trip computer. Reset: trip computer re-back to the original factory state.
Page 18: Alarm Settings
Exit: to exit the software, return to the main menu interface. Standby time: set sleep time for trip computer, when trip computer is in its host interface, if the users don’t click the screen, the trip computer will turn off automatically by the setting countdown time Language: set up language for trip computer Volume: adjust the volume of the trip...
Page 19: Vehicle Testing
Tired alarm: set the time of fatigue driving alarm value. Speed alarm: set the speed alarm value. Shift reminding: set the shift reminding and cancel the speed reminding. Vehicle testing Read DTC: the user can manually detect the failure of the vehicle electronic control system, fault information will be displayed on the screen in text mode.
Page 20: Fuel Consumption Setting
Acceleration: You can set the initial speed and end speed, and then start the test, let the vehicles in their full acceleration, the system will automatically record the speed from the initial to the termination of the acceleration time between the speeding.
Page 21 Aver consum: to set the average fuel consumption coefficient. Clear consum: to empty the history of fuel consumption and mileage data. Manually fuel: Enter the amount of fuel in the current fuel tanks which is used to calculate mileage and it should be re-entered after each refueling.
Page 22: Software Updating
Software updating The trip computer ‘s latest version software can be downloaded from the official website, when software upgrading , connect the trip computer with the PC through the data line, then download the data package ,after extracting it , covering the SD card on the V-checker and name the same folder , users can also remove the SD card ,then connect a card reader to the PC to complete the...

This manual is also suitable for:

Atc500 3501057 Atc700 3501058 3501059