Advertisement
Advertisement
Table of Contents
Summary of Contents for Frezzi M1000
- Page 2 NOTES: SAFETY - READ BEFORE GOING FURTHER Please read entire owners manual before operation. WARNING The product is marked with this symbol when it is required to refer to the instruction manual to protect the operator from safety hazards. IMPORTANT: DO NOT EXPOSE TO RAIN OR MOISTURE TO PREVENT FIRE AND SHOCK HAZARD POWER INPUT: 90-135 OR 180-240VAC 50/60 HZ.
- Page 3 IMPORTANT: BP-90 front port bypasses the top battery connec- tor. When charging is complete, the green “Ready” LED will come on. The battery may remain on the charger until needed. The M1000 will supply a maintenance charge to keep the battery topped off until ready for use.
- Page 4 16.5 Volts. Reset the unit by switching back to the charger mode to clear the over- voltage condition. If the condition continues, the unit is in need of servicing and should sent back to the Frezzi service center. page 8 page 5...
- Page 5 Frezzi Energy Systems has a fully equipped service center. If you and power products for the broadcasting industry for over 60 years. have a question about your Frezzi product or are in need of service Frezzi offers a complete line of high capacity battery packs, bracket...
- Page 6 ENG or event shoot, easily finding a home in any camera bag. Fast Charge The M1000-P is the only charger in its size class which features a Fast charge program to rapidly charge all 12.0 13.2 or 14.4Volt NiCad or NiMH batteries.
- Page 7 To quickly boost a low voltage battery, press the “Rescue” button NOTES: and wait for the voltage to rise above 12 Volts. Remove the battery and wait for the “Rescue” light to stop flashing. Reinsert the battery and confirm that Charging has begun. Repeat the above steps if the low voltage condition continues or let the Rescue program run a full overnight cycle.
- Page 8 20 Hours to 94111 M1000 Universal Single Charger Battery is Low Voltage complete. 94112 M1000A M1000 w/ Brick Battery Mount 94109 M1000P M1000 w/ Power Supply 94110 M1000AP M1000 w/ Brick Mount & PS page 6 page 7...
Need help?
Do you have a question about the M1000 and is the answer not in the manual?
Questions and answers