Velleman WS3080 User Manual page 7

Weather Refer to §8.2 for more information.
forecast
tendency
tendency
pressure threshold set threshold between 2 ~ 4 hPa (default = 2hPa)
storm threshold
Indoor high alarm
humidity
low alarm
reset max
reset min
Indoor unit mode
temperature
high alarm
low alarm
reset max
reset min
Outdoor high alarm
humidity
low alarm
reset max
reset min
Outdoor display mode
temperature
unit mode
high alarm
low alarm
V. 05 – 08/11/2016
WS3080
select tendency
set threshold between 3 ~ 9 hPa (default = 4hPa)
set the high alarm level
Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,
the alarm icon appears.
set the low alarm level
Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,
the alarm icon appears.
(both indoor humidity [7] and max icon (between [14] and [15]) are
flashing)
press and hold the ENTER button for ±3s to reset max value to current
measurement
(both indoor humidity [7] and min icon (between [14] and [15]) are
flashing)
press and hold the ENTER button for ±3s to reset min value to current
measurement
select °C or °F
set the high alarm level
Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,
the alarm icon appears.
set the low alarm level
Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,
the alarm icon appears.
(both indoor temperature [8] and max icon (between [14] and [15]) are
flashing)
press and hold the ENTER button for ±3s to reset max value to current
measurement
(both indoor temperature [8] and min icon (between [14] and [15]) are
flashing)
press and hold the ENTER button for ±3s to reset min value to current
measurement
set the high alarm level
Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,
the alarm icon appears.
set the low alarm level
Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,
the alarm icon appears.
(both outdoor humidity [11] and max icon (between [14] and [15]) are
flashing)
press and hold the ENTER button for ±3s to reset max value to current
measurement
(both outdoor humidity [11] and min icon (between [14] and [15]) are
flashing)
press and hold the ENTER button for ±3s to reset min value to current
measurement
select whether to show outdoor temperature, wind chill or dew point on the
display [12]
select °C or °F
set the high alarm level
Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,
the alarm icon appears.
set the low alarm level
Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,
the alarm icon appears.
7 ©Velleman nv