Back Panel - Phonic i7200 XrossTech User Manual

Back Panel

26. Channel 1 Input
These balanced combination connectors accept either
professional 3-pin XLR or 1/4 TRS inputs.
27. Channel 1 Low Output (Mono Sub Output)
Feature both professional 3-pin XLR and 1/4 TRS bal-
anced line outputs. This output is used in conjunction
with speakers suitable for low frequency reproduction
of audio when in stereo mode, and acts as an optional
subwoofer output when in mono operation.
28. Channel 1 High Output (Mono Low Output)
Feature both professional 3-pin XLR and 1/4 TRS
balanced line outputs. This output is used to connect
speakers suitable for high frequency reproduction of au-
dio when in stereo mode, and acts as a Low frequency
output when in mono mode.
29. Channel 2 Input
These balanced combination connectors accept either
professional 3-pin XLR or 1/4 TRS inputs.
30. Channel 2 Low Output (Mono Mid Output)
Feature both professional 3-pin XLR and 1/4 TRS bal-
anced line output. This output is used to connect speakers
suitable for low frequency reproduction of audio when
in stereo mode, and for mid-range speakers when in
mono mode.
31. Channel 2 High Output (Mono High Output)
Feature both professional 3-pin XLR and 1/4 TRS bal-
anced line output. This output is used to connect speakers
suitable for high frequency reproduction of audio when
in both stereo and mono modes.
Page 8
32. AC Power Cable Connector
Connect the supplied AC power cord to this connector,
and insert the power plug into a wall-socket of suitable
voltage.
I7200 USER'S MANUAL PHONIC CORPORATION