Table of Contents
Advertisement
16-420.fm Page 31 Tuesday, July 20, 1999 11:32 AM
Setting the Automatic Timer
Note: Before you start, be sure you set the Mod-
el 28's clock to the correct date and time (see
"Setting the Clock" on Page 19). If you have not
yet set the clock, the Model 28 automatically en-
ters the clock setting mode before it displays the
automatic timer program screen.
1. Insert a blank cassette, or one that you
want to record over, into the cassette com-
partment. The Model 28 automatically turns
on.
Note: If a cassette was loaded when you
last turned off the Model 28, you must press
to turn on the Model 28.
POWER
2. Press
The main menu appears on
MENU.
the TV screen.
3. Press
on the remote control to select
1
TIMER
PROGRAMMING
gram screen appears on the TV screen.
PROG.
1 2 3 4 5 6 7 8
DATE
START TIME
END
TIME
CHANNEL
TAPE SPEED
Notes:
• If the clock setting screen appears
instead of the timer program screen, you
must first set the clock before you can
continue. For more information, see "Set-
ting the Clock" on Page 19.
• Although program number 8 is displayed,
it is used for the today timer and you can-
not select it in Step 4. For more informa-
tion, see "Today Timer Recording (Timer
Number 8)" on Page 33.
This screen displays the following informa-
tion about each timer program you set.
•
•
•
•
•
•
4. Use the number buttons (1-7) on the
remote control to select the desired pro-
gram number, then press
. The timer pro-
• If you select a program number with a
• If you select an empty program number,
5. Press
select the desired program mode (ONCE,
DAILY (MON-FRI), or WEEKLY).
6. Use the number keys on the remote control
to enter the program's month and day. For
example, press
ary 15.
Notes:
• Precede a single-digit number with a 0 –
• If you set a month and day that is before
(program number)
PROG.
Note: If you have not set any program
numbers, all program numbers flash. If
you already set any program numbers,
only the empty program numbers flash.
DATE
(month and day of the program)
START
TIME
(start time of the pro-
gram)
(stop time of the program)
END TIME
(channel to record)
CHANNEL
(tape speed during re-
TAPE
SPEED
cording.
SELECT
program already assigned, you can
change any displayed information. Or, if
it is correct, press
. The program
MENU
information disappears.
a blank program screen appears. You
can add information to the screen to pro-
gram the timer.
,
, or
on the remote control to
1
2
3
,
,
, and
0
2
1
5
for example,
,
, etc.
01
02
the Model 28's current clock date, the
Model 28 sets the month and day for the
next year.
.
to set Febru-
31
Advertisement
Table of Contents
