Manufactured under license from Dolby Errors reported to Philips will be applied and Laboratories. Dolby, Dolby audio and the published on the Philips support website as double-D symbol are trademarks of Dolby soon as possible.
TV set and the bracket. TP or inside of the TV set, please power Vision Europe B.V. does not bear any off the TV. Please contact Philips’ responsibility for accidents, damage customer service center, do not use or destruction due to incorrect wall the TV set before check.
Screen protection to allow curtains or other objects to cover the vents of the TV set. • Please try to avoid rendering fixed If inadvertently, the TV set may be damaged! images on the screen. A so-called • Before connecting the TV set to a fixed image means an image stays power outlet, make sure the outlet on the screen for a long time.
• Upon operating the common Congratulations for purchasing and using interface, you can move the cursor Philips product! In order to enjoy all the up and down. supports provided by Philips, please register your TV at www.philips.com/welcome. Remote Control...
Playback and Record 0-9 number keys Control playback of multimedia files. Select channels or enter text. Sleep timer EXIT Quickly start and set the sleep timer. Close the menu. FORMAT (Dot) Change the picture format to suit the Enter digital sub-channels. video source.
4 Using TV Keys on TV If you lost the remote control or its batteries are empty, you can still do some basic TV operations by using the joystick on the back This section introduces the basic operations of the TV. of the TV.
Switch to a device Note • Before selecting an external signal source, please start up the external device. SOURCES to open the Source Press menu. Select one of the item in the source list. Press OK to select. » TV is switched to the selected device. Adjust the TV volume Increase or reduce the volume •...
5 Using More Automatic channel search Feature of SETUP. Press Select [TV] > [Antenna Channel Search] or your TV [Cable Channel Search] and press OK. Press OK to start the automatic channel search. Note • This feature can be used only in the TV Access the TV menu mode.
• Change the picture format [Vivid]: Application of dynamic and colorful settings, which is suitable for Press SETUP, select [Picture] > [Aspect daytime watching. • Ratio], and then press [Standard]: Adjust the picture settings to suit most types of video environments and types.
Use sleep timer SETUP, and select [Sound] > Press [Smart Sound]. The sleep timer can switch the TV to standby Select one of the following settings, and after a predefined time. then press OK: • [Standard]: Applies to the sound settings of most environments and •...
[Channel Lock]. Updating the TV software Enter your password using the number keys on your remote control. Philips is continuously striving to improve its Select the channel you want to lock or products, and we recommend updating your unlock. TV software after updates are launched.
6 Playing media Change the slide show settings Press Menu when playing a slide. » Display the list of slide show options, and browse photos in accordance with the instructions on the screen. Play from a USB connection Note Turn on the TV. •...
Picture formats supported Select a picture. by USB Press OK to play the slide. File Format Photo Resolution Watch the movie Base-line 15360x8640 JPEG Progressive 1024x768 Select [Folders] or [Video] in the browse page. non-interlace 9600x6400 Press OK to play the movie. interlace 1200x800 »...
Before connecting the device to the TV set, please back up your files to prevent file damage or data loss. For no support for USB storage devices, Philips assumes no responsibility, and shall not be liable for any damage or loss of data in the device.
7 Installing channels The first time you set up your TV, you are prompted to select a menu language and to install TV channels. Automatic channel search Press SETUP. Select [TV] > [Antenna Channel Search] or [Cable Channel Search] and press OK. Press OK to start the automatic channel search.
8 Connecting Antenna Signal input from an antenna or cable. Devices This section describes how to connect devices with different connectors. Note • You can use different types of connectors to connect a device to your TV. Component input Bottom Connectors •...
Side Connectors Data input into USB storage devices. Use Philips EasyLink Taking full advantage of your Philips EasyLink HDMI-CEC compatible devices can enhance the control function and achieve the best possible results. HDMI-CEC compatible devices connected through the HDMI...
Page 21
Turn on or off EasyLink Note • Pease do not enable Philips EasyLink if you do not intend to use it. Press SETUP. Select [EasyLink] > [HDMI CEC]. Select [On] or [Off] and press OK. Use the CEC device list Press SETUP.
Supported storage device: USB (Supports FAT 32/FAT 16 USB storage devices.) Product information may be subject to change without prior notice. For detailed product Sound power information, please go to www.Philips.com/ support • 50PUN6102: 8W x 2 • 55PUN6102: 8W x 2...
Power consumption: • 50PUN6102: TBDW • 55PUN6102: TBDW Supported TV Mounts To install the TV set, purchase a Philips TV mounting bracket. Warning • Please follow all the instructions provided with the TV mounting bracket. TP Vision Europe B.V. does not bear any...
If the reception, please fine tune this channel. flashing still occurs, please contact the Poor picture quality of the device connected Philips customer service center. thereto: Forget the code to unlock the TV lock: •...
• If audio signal cannot be detected, the If the problem is still not resolved, please TV set will automatically switch off audio contact your local Philips customer service output - This does not indicate a failure. center. • Check that all cables are properly Warning connected.
12 Software The Software is “in use” when it is loaded into the temporary or permanent memory (i.e. RAM, hard disk, etc.) of the PC or the Device. 2. Ownership. The Software is licensed and not sold to you. This Agreement grants you only the right to use the Software, but you Software end user license do not acquire any rights, express or implied,...
Page 27
which implements Microsoft’s digital rights access such as the ability to download management technology for Windows Media. content that requires the WM-DRM Upgrade. Content providers are using the digital rights All title and intellectual property rights in management technology for Windows Media and to the Secure Content is the property of (“WM-DRM”) to protect the integrity of their the respective Secure Content owners and...
Page 28
and related materials provided to you by TP YOUR REQUIREMENTS. YOU ASSUME ALL VISION hereunder. TP VISION’s rights and RESPONSIBILITIES FOR SELECTION OF THE your obligations shall survive the termination SOFTWARE TO ACHIEVE YOUR INTENDED of this Agreement. RESULTS, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED FROM 7.
Page 29
export the Software to any country for which the United States Export Administration Act, or any similar United States law or regulation requires an export license or other U.S. Government approval, unless the appropriate export license or approval has first been obtained.