Download
Share
Print this page
  1. Manuals
  2. Brands
  3. ATD AIR Manuals
  4. Sander
  5. ATD-2182A
  6. Owner's manual

ATD AIR ATD-2182A Owner's Manual

6” dual action sander
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
ATD-2182A
6" DUAL ACTION SANDER
OWNERS MANUAL
SPECIFICATIONS
Sanding Pad ..................................................................... 6" (152 mm)
Free Speed ....................................................................... 10,000 rpm
Average Air Consump on ................................................... 3.3 CFM
Required Air Pressure .............................................. 90 PSI (6.3 BAR)
Air Inlet Size ................................................................................... 1/4"
Air Hose .......................................................................................... 3/8"
Dimensions ................................ 9.84" x 5.63" (250 mm x 143 mm)
Net Weight .......................................................... 4.08 Lbs. (1.85 Kgs)
ATD2182A_rev_1117
Visit us at www.atdtools.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the ATD-2182A and is the answer not in the manual?

Questions and answers

Related Manuals for ATD AIR ATD-2182A

Summary of Contents for ATD AIR ATD-2182A

  • Page 1 ATD-2182A 6” DUAL ACTION SANDER OWNERS MANUAL SPECIFICATIONS Sanding Pad …………………………………………………………… 6” (152 mm) Free Speed .……………………………………………………………. 10,000 rpm Average Air Consump on …………………………………………… 3.3 CFM Required Air Pressure ………………………………………. 90 PSI (6.3 BAR) Air Inlet Size ……………………………………………………………………….. 1/4” Air Hose ……………………………………………………………………………… 3/8”...

  • Page 2: General Safety Warnings

    California Pro 65 Warning WARNING: This product contains chemicals including lead, known to the State of California to cause cancer, birth defects, or other reproduc ve harm. Wash hands er handling. WARNING: Some examples of these chemicals are: RISK OF EYE OR HEAD INJURY RISK OF FIRE OR EXPLOSION RISK OF LOSS OF HEARING INHALATION HAZARD...
  • Page 3 WARNING: Keep bystanders and children out of the work area while opera ng this tool. WARNING: Always keep your work area clean, unclu red, and well lit. Clu ered or dark areas invite accidents and injuries. DO NOT work on oor surfaces that are slippery. WARNING: Do not operate this tool if you are red or under the in uence of alcohol, drugs, or medica ons that could a ect your ability to use the tool properly.
  • Page 4 Typical Air Supply Instal Air Supply Whip Hose Filter Do Not Install Nipple Quick Coupler Nipple Here Quick Coupler Lubricator Regulator Leader Hose Drain Daily Figure 1 Always use clean, dry air. Dust, corrosive fumes and/or water in the airline will cause damage to the tool. Drain the air tank daily.
  • Page 5 Ensure you read, understand and apply safety instructions before use. If more detail is needed, please refer to the parts breakdown on seat (#10) to lock the bearing seat 2. Mount the sanding pad onto the bearing seat (#10) by turning the Figure 2 Figure 3 WARNING:...
  • Page 6 The tool should be lubricated daily (or before each use) with air tool oil. NOTE Air tool oil is available at major hardware stores. SAE #10 weight oil or any high grade turbine oil containing moisture DO NOT USE DETERGENT OIL. Figure 7 If done manually, proceed as follows: 1.
  • Page 7 PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Motor parts worn. Lubricating clutch housing. Check for excess clutch oil. Clutch cases need only be half full. Overfilling can cause drag on high speed clutch parts. A typical oiled/lubricated wrench requires Tool runs at normal speed Cam clutch worn or sticking due to lack of 1 2 ounce of oil.
  • Page 8 ATD-2182A ITEM# ORDERING PART# PART DESCRIPTION ITEM# ORDERING PART# PART DESCRIPTION PRT2182A-01 BOLT PRT2182A-27 GASKET PRT2182A-02 FLAT WASHER PRT2182A-28 HOUSING PRT2182A-03 SPRING WASHER PRT2182A-29 HOUSING GRIP PRT2182A-04 COPPER INLAY PRT2182A-30 RETAINER RING 6 PRT2182A-05 PRT2182A-31 O-RING 4.5*1.8 PRT2182A-06 NUT M6...

  • Page 9: Year Limited Warranty

    INVOICE/RECEIPT NUMBER: _________________________________________ Your ATD-2182A is warranted for a period of 12 months from the original purchase date. For a period of one (1) year from your purchase date, ATD Tools Inc. will repair or replace (at its option) without charge, your ATD product if it was purchased new and the product has failed due to a defect in material or workmanship which you experienced during normal use of the product.