TM Module Users Manual Table of Contents Ch. 1. Preface……………………………………………….3 How to Use This Guide…………………………………………………….3 Conventions………………………………………………………...3 Related Documents………………………………………………..3 Support………………………………………………………………………4 Safety Warnings and Information………………………………………...4 Ch. 2. Overview……………………………………………..5 Overview…………………………………………………………………….5 Ch. 3. Configuration……………………………………….6 Ch. 4. Operation…………………………………………….7 Log In of TSC2000…………………………………………………………7 TSC2000 Main…………………………………………………………….. 8 TSC Monitor Setting……………………………………………………….9 To drag monitor location………………………………………………………….9 To change page…………………………………………………………………...9...
Page 4
Tops Digital Solutions TM Module Users Manual Ver.1.0...
TM Module Users Manual Ch. 1. Preface How to Use This Guide This manual is intended to give instructions to persons who are responsible for installing, configuring and oper- ating the TSC2000 Series Conventions The following symbols and notations are used throughout this document: Warning! This symbol indicates that failure to follow the safety instructions described may endanger users and cause damage to the unit or to other equipment.
Page 6
Tops Digital Solutions TM Module Users Manual Ver.1.0...
TM Module Users Manual Support If you encounter any problems after reading this manual, contact your Tops Digital Security Tech Support representative. You can also browse the Technical Support site, located in the Support section of our website, for solutions to many of the most common problems. Tops Digital Security technical support personnel is available for help with all Tops hardware and software products.
Page 8
Tops Digital Solutions TM Module Users Manual Ver.1.0...
TM Module Users Manual Ch. 2. Overview Overview Tops Touch Screen Controller ( TSC) 2000 Series direct and controls the decoder, encoder, display and live play back on monitors that are networked in the system. Easy to use Graphic User Inference ( GUI ) allows the user to control and manage encoders, decoders, VMAP and live play back from one location.
Page 10
Tops Digital Solutions TM Module Users Manual Ver.1.0...
TM Module Users Manual Ch. 4. Operation Log In of TM Module After installation is finishes, a dialogue box for Log-in will appear on the screen. Item Function Description User Name Type User Name Password Type Password Press after typing user name and password Cancel Cancel Keyboard...
Page 14
Tops Digital Solutions TM Module Users Manual Ver.1.0...
Page 15
TM Module Users Manual TSC Main Item Function Description Monitor Each monitors can be dragged to change locations Monitor/ Camera To select monitor and cameras to be displayed in TSC Menu Bar Various functions in TSC Quick Menu bar Quick function buttons in TSC Page Arrows To change pages in TSC Tops Digital Solutions...
Page 16
Tops Digital Solutions TM Module Users Manual Ver.1.0...
TM Module Users Manual TSC Monitor Setting The user can set monitor location and lock the monitor positions on the screen. Each monitors are given monitor ID numbers. To Drag Monitor Location To move monitor location, simply “Drag” the monitors to desired location on the display screen To Change Page Monitors are composed in total of 4 pages.
Page 18
Tops Digital Solutions TM Module Users Manual Ver.1.0...
TM Module Users Manual Set LIVE Channel to Monitors The user may set monitor and cameras channels to display LIVE mode on the screen. To Select Monitors Click on to select monitor. A key pad will appear. Select monitor number from the keypad. ( To remove the key pad, click on once more) Or, you may click on the monitor to select from the display screen.
Page 20
Tops Digital Solutions TM Module Users Manual Ver.1.0...
TM Module Users Manual Set LIVE Mode The user can select camera channels and connect monitors to display LIVE mode on the screen. To Select Camera Channel Click camera button to select camera channel to display live. A key pad will appear as above. Press camera channel number to select the channel. NOTE: To remove a key pad, click on Camera button once more.
Page 22
Tops Digital Solutions TM Module Users Manual Ver.1.0...
TM Module Users Manual Set LIVE Mode To Play LIVE Mode Once monitor and camera channel are set up for LIVE mode, press to display LIVE view on selected monitor. Ex) Monitor 5, Camera Channel 41 go LIVE Monitor Camera Live Tops Digital Solutions TM Module Users Manual Ver.1.0...
Page 24
Tops Digital Solutions TM Module Users Manual Ver.1.0...
TM Module Users Manual Set Search Mode To Select Monitors Click on to select monitor. A key pad will appear. Select monitor number from the keypad. ( To remove the key pad, click on once more) Or, you may click on the monitor to select from the display screen. Selected monitor number will appear under the monitor button.
Page 26
Tops Digital Solutions TM Module Users Manual Ver.1.0...
TM Module Users Manual Set Search Mode The user can select camera channels and connect monitors to display Search Mode on the screen. To Select Camera Channel Click camera button to select camera channel to display live. A key pad will appear as above. Press camera channel number to select the channel. NOTE: To remove a key pad, click on Camera button once more.
Page 28
Tops Digital Solutions TM Module Users Manual Ver.1.0...
TM Module Users Manual Search Mode The user may set for SEARCH mode in TSC to search recorded image files. Set Search Mode Press SEARCH button to view Search Mode. The page will change to Search Mode. Search Main Item Function Description Camera Information...
Page 30
Tops Digital Solutions TM Module Users Manual Ver.1.0...
TM Module Users Manual To Change Search Period The user can set search period to display the recorded image file on selected monitor for searching. To Use Arrows Use arrows at each end to change time Each time your click on arrow will allow you to move time frame one step at a time. NOTE: Hour is divided into 24 sections, each section indicates each hour.
Page 32
Tops Digital Solutions TM Module Users Manual Ver.1.0...
TM Module Users Manual To Control Search Play Mode The user may control search play mode by using play control bar Item Description To move very first image To move previous image Play Back Stop Play To forward image To move very last image Tops Digital Solutions TM Module Users Manual Ver.1.0...
Page 34
Tops Digital Solutions TM Module Users Manual Ver.1.0...
TM Module Users Manual Preset The user can set up PRESET to view LIVE mode on selected monitor. If necessary, current LIVE mode can be set as PRESET for your convenience. To Set PRESET Click PRESET button to set up PRESET in TSC. A preset list will appear as above.
Page 36
Tops Digital Solutions TM Module Users Manual Ver.1.0...
TM Module Users Manual Shortcut To Preset The user may utilize the shortcut to preset feature to set up and modify Preset more conveniently. Shortcut Preset Select Preset Mode from the right corner of the screen. ( All function buttons located at right corner are shortcuts) To View LIVE from Preset Once select Preset button from the right, a screen will change to Preset Mode.
Page 38
Tops Digital Solutions TM Module Users Manual Ver.1.0...
TM Module Users Manual Salvo Salvo feature enables the previously arranged Presets to rotate automatically as a sequence in certain time frame. To Set Salvo Click on Salvo button to set up Salvo settings. The screen will change as below. “...
Page 40
Tops Digital Solutions TM Module Users Manual Ver.1.0...
TM Module Users Manual To Cancel Preset Sequence from Preset Salvo Order To remove preset from Preset Salvo Order, select on the preset number that you want to remove from Preset Salvo order. Casino 1 Select preset number that you want to remove from salvo order here. Click to remove selected preset number from salvo order.
Page 42
Tops Digital Solutions TM Module Users Manual Ver.1.0...
TM Module Users Manual VMAP Virtual Map ( VMAP) allows the users to virtually view the security region or area on a map. You may register a map of desired area in a VMAP. Item Function Description Map Tree Display list of maps Function Buttons Various functions can be selected Mini Map...
Page 44
Tops Digital Solutions TM Module Users Manual Ver.1.0...
TM Module Users Manual 1. Map Tree Map Tree displays all listed maps in VMAP. Map Tree list is divided into groups and subgroups under a group. The primary group is shown as The map under a group is shown as The map for a building is shown as NOTE:...
Page 46
Tops Digital Solutions TM Module Users Manual Ver.1.0...
TM Module Users Manual 2. Mini Map Mini Map Mini Map displays current VMAP in minimized scale for your convenience. To move locations on the mini map, click and move to desired locations from the mini map. To Hide Mini Map To hide/ remove the mini map from display, click will hide the mini map.
Page 48
Tops Digital Solutions TM Module Users Manual Ver.1.0...
TM Module Users Manual 3. Function Buttons Button Function Description Zoom In / Out Zoom in/out the map Drag Drag positions on the map Move Map page Move to previous and next map page Camera Information Displays information on cameras that are displayed on VMAP.
Page 50
Tops Digital Solutions TM Module Users Manual Ver.1.0...
TM Module Users Manual 3. Function Buttons Camera Information Display information on cameras that are displayed on VMAP. A separate dialog box will appear once you click Camera Information button. Select Map Map Display Camera Lists To Select Map to View Cameras Click on down arrow to see listed maps that are listed on VMAP.
Page 52
Tops Digital Solutions TM Module Users Manual Ver.1.0...
Page 53
TM Module Users Manual To View Next Camera Information To View 1 Channel Viewer The user may view 1 channel viewer to operate advanced search. To do so, you may choose from two options. 1. Double click on camera information from camera list 2.
Page 54
Tops Digital Solutions TM Module Users Manual Ver.1.0...
TM Module Users Manual 3. Function Buttons 1 Channel Viewer 1 channel viewer allows the user to advanced search and advanced live mode. Default view of 1 channel viewer is display as LIVE mode. To Select 1 Channel Viewer Double click on Cameras from the VMAP will allow you to start 1 channel viewer Selected camera image will be played Live on 1 channel viewer.
Page 56
Tops Digital Solutions TM Module Users Manual Ver.1.0...
Page 57
TM Module Users Manual To change 1 Channel Viewer Size The user may adjust 1 channel viewer size range from 120x180 to 720x360 To adjust, click on Click on to minimize the viewer size Click on to increase the viewer size Click on to maximize the viewer size 120x180...
Page 58
Tops Digital Solutions TM Module Users Manual Ver.1.0...