Summary of Contents for CAP-XX APPEB1006
-
Page 1: Evaluation Board
User’s Manual Camera Phone Flash Evaluation Board APPEB1006 APPEB1006 User Manual rev1.0, 31-May-2005 page 1 of 6 All information contained herein is strictly confidential © CAP-XX Pty Limited 2005... -
Page 2: Board Features
D1 is a red LED that indicates a source voltage is present and that a UVLO has not occurred. D2 is a yellow LED and indicates that Vout is present and above approximately 5V. APPEB1006 User Manual rev1.0, 31-May-2005 page 2 of 6 All information contained herein is strictly confidential ©... -
Page 3: Boost Converter
(R22) and M4 and then only say 150mA would be available. Option b) is factory chosen and the TORCH current is set to 100mA. APPEB1006 User Manual rev1.0, 31-May-2005 page 3 of 6 All information contained herein is strictly confidential... -
Page 4: Current Control
2.5s. Further Information CAP-XX will be pleased to provide further information on the applications described here, and on the use of supercapacitors in any application. Please use the contact details on the header page, or visit the cap-XX web site. - Page 5 R047 100k 500k BAT754 T93YB SOT23 Manual Boost Disable FDV302P *Boost Disable Flash SOT23 14k3 B3SN T93YB Auto Flash APPEB1006 User Manual rev1.0, 31-May-2005 page 5 of 6 All information contained herein is strictly confidential © CAP-XX Pty Limited 2005...
- Page 6 External Timer FDV301N *Boost Disable Torch Vout FDV301N Torch/*Flash Torch Boost Disable Torch Voltage B3SN Torch FDV301N Auto Torch FDV301N APPEB1006 User Manual rev1.0, 31-May-2005 page 6 of 6 All information contained herein is strictly confidential © CAP-XX Pty Limited 2005...