Engine Coolant - BOMBARDIER Sea-Doo GTX Operator's Manual

MAINTENANCE PROCEDURES

Engine Coolant

Recommended Engine Coolant
COUNTRY
Finland, Norway
and Sweden
All other countries
Alternative, or if
not available
NOTICE
Always use ethylene-gly-
col antifreeze containing corrosion
inhibitors specifically for internal
combustion aluminum engines.
To prevent antifreeze deterioration, al-
ways use the same brand and grade.
Never mix different brands or grades
unless cooling system is completely
flushed and refilled.
Engine Coolant Level
WARNING
Check coolant level with engine
cold. Never add coolant when en-
gine is hot.
CAUTION Many components
in the engine compartment may be
very hot. Direct contact may result
in skin burn.
______________
122
RECOMMENDED
COOLANT
LONG LIFE
ANTIFREEZE(F)
(P/N 619 590 204)
LONG LIFE
ANTIFREEZE
(P/N 219 702 685)
If the
recommended
coolant is not
available, use a low
silicate, extended
life ethylene-glycol
premixed coolant
(50%-50%)
specifically
formulated
for internal
combustion
aluminum engines.
Remove seats.
Locate the expansion tank cap.
219001878-051_a
1. Expansion tank cap
With watercraft on a level surface,
coolant level should be between MIN.
and MAX. marks on coolant reservoir
when engine is cold.
219001878-052_a
COOLANT EXPANSION TANK
1. Level between marks when engine is cold
NOTE: The watercraft is level when
it is in water. When on a trailer, raise
trailer tow pole and block in this posi-
tion when bumper rail is level.
Add coolant, see
ENGINE COOLANT
to adjust coolant level between marks
as required. Use a funnel to avoid
spillage. Do not overfill.
Properly tighten the expansion tank
cap. Reinstall seats.
RECOMMENDED
for specification,