Radio Shack Trunk Mount Owner's Manual page 9

12-1976.fm Page 9 Tuesday, July 13, 1999 10:01 AM
If your autosound system has only two phono output jacks (left and right)
and you are using four speakers, first connect the single phono plug end of
a Y-adapter shielded audio cable to each autosound system output jack.
Then:
• Connect the other two ends of the left Y-adapter to the amplifier's corre-
sponding
FRONT L
• Connect the other two ends of the right Y-adapter to the amplifier's corre-
sponding
FRONT R
and phono jacks
REAR L
and phono jacks
REAR R
9