Takeo - Airdog ADII User Manual

Full functionality of your the drone will be unlocked only after all levels of training are
successfully passed.

10.4 Takeo

Make sure that AirLeash and Airdog ADII are on the same altitude before you initiate takeo .
Altitude di erences between ADII and AirLeash of more than 7 feet (2 meters) can cause
incorrect camera framing.
To takeo :
1. Airdog ADII is ready for takeo when you see the
"READY" status on the AirLeash display and all
drones LEDs are solid green.
2. Short press the Play/Pause
button to confirm takeo .
3. ADII will ascend to the preset takeo altitude,
point the camera at AirLeash and HOVER in the
current position. When the drone is in HOVER,
you'll see the "pause" icon in the status bar:
4. To initiate FOLLOW, short press the Play/Pause
button on AirLeash.
CAUTION! The drone will slowly fly backwards
to reach the preset follow distance!
When the drone is in FOLLOW, you'll see the "play"
icon in the status bar:
REMEMBER - YOU CAN ALWAYS STOP the drone by pressing the

button on AirLeash and then the Power/OK



button
62