Related Manuals for MIDI hardware euro-MIDECO
Summary of Contents for MIDI hardware euro-MIDECO
- Page 1 MIDECO eurorack module 24-outputs MIDI note decoder USER MANUAL Roman Sowa 2015 www.midi-hardware.com...
- Page 2 Overview MIDECO module is a decoder of MIDI notes to gates or triggers. It receives MIDI notes via DIN5 MIDI IN jack and converts them to +5V gate or trigger pulses, depending on mode selected. There are 24 outputs and each of them is assigned to different MIDI note from continuous range in single MIDI channel.
- Page 3 Panel & modes of operation Upper knob is for mode selection. Possible modes: GATE – output is active (+5V) as long MIDI note is on. Pulse width knob and CV has no use. TRIG – output is active (+5V) only for the short time at MIDI note start.
- Page 4 channel and within my range, ORANGE = waiting for first note in MIDI-learn procedure. Module does not blink on MIDI real time messages like MIDI clock for better visibility. To assign a range of 24 gates to notes, press LEARN button and play the lowest note of that range.
- Page 5 MIDI System-Exclusive Starting note, MIDI channel, and mode of operation can be set also with MIDI Sys-Ex message of the following syntax (in hex): F0 00 20 7A 05 01 [channel] [mode] [starting note] F7 channel must be entered as one of the following values representing channel 1-16 accordingly: 01, 02, 03, 04, 05, 06, 07, 08, 09, 0A, 0B, 0C, 0D, 0E, 0F, 10 mode selects one of the modes just like mode switch, and can take those values: 01 –...
- Page 6 "MIDI-hardware" Roman Sowa ul. Azotowa 15B, 41-503 Chorzów, Poland phone +48 532 425 835, email info@midimplant.com © 2015, Roman Sowa made in Poland...
Need help?
Do you have a question about the euro-MIDECO and is the answer not in the manual?
Questions and answers