1. Manuals
  2. Brands
  3. INSYS Manuals
  4. Laptop
  5. StyleNote M74*S series
  6. User manual

INSYS StyleNote M74*S series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

V09.5.20

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the StyleNote M74*S series and is the answer not in the manual?

Questions and answers

Summary of Contents for INSYS StyleNote M74*S series

  • Page 1 V09.5.20...
  • Page 3 Preface Notice The company reserves the right to revise this publication or to change its contents without notice. Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent vendor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication.

  • Page 4: Fcc Statement

    Preface FCC Statement (Federal Communications Commission) You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

  • Page 5: Fcc Rf Radiation Exposure Statement

    Preface FCC RF Radiation Exposure Statement: This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

  • Page 6: Important Safety Instructions

    Preface IMPORTANT SAFETY INSTRUCTIONS Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock, and injury to persons when using any electrical equipment: Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.

  • Page 7: Instructions For Care And Operation

    Preface Instructions for Care and Operation The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions: Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be damaged. Do not expose the computer Do not place it on an unstable Do not place anything heavy...
  • Page 8 Preface Avoid interference. Keep the computer away from high capacity transformers, electric motors, and other strong magnetic fields. These can hinder proper performance and damage your data. Follow the proper working procedures for the computer. Shut the computer down properly and don’t forget to save your work.

  • Page 9: Power Safety

    Preface Power Safety The computer has specific power requirements: • Only use a power adapter approved for use with this computer. • Your AC/DC adapter may be designed for international travel but it still requires a steady, uninterrupted power supply. If you are unsure of your local power specifications, Power Safety Warning consult your service representative or local power company.

  • Page 10: Battery Precautions

    Preface Battery Precautions • Only use batteries designed for this computer. The wrong battery type may explode, leak or damage the computer. • Do not remove any batteries from the computer while it is powered on. • Do not continue to use a battery that has been dropped, or that appears damaged (e.g. bent or twisted) in any way. Even if the computer continues to work with a damaged battery in place, it may cause circuit damage, which may possibly result in fire.

  • Page 11: Cleaning

    Preface Cleaning Do not apply cleaner directly to the computer; use a soft clean cloth. Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer. Servicing Do not attempt to service the computer yourself. Doing so may violate your warranty and expose you and the computer to electric shock.

  • Page 12: Travel Considerations

    Preface Travel Considerations Packing As you get ready for your trip, run through this list to make sure the system is ready to go: Check that the battery pack and any spares are fully charged. Power off the computer and peripherals. Close the display panel and make sure it’s latched.
  • Page 13 Preface On the Road In addition to the general safety and maintenance suggestions in this preface, and Chapter 8: Troubleshooting, keep these points in mind: Hand-carry the notebook - For security, don’t let it out of your sight. In some areas, computer theft is very common.
  • Page 14 Preface Developing Good Work Habits Developing good work habits is important if you need to work in front of the computer for long periods of time. Improper work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or other joints.

  • Page 15: Lcd Screen Care

    Preface Lighting Proper lighting and comfortable display viewing angle can reduce eye strain and muscle fatigue in your neck and shoulders. • Position the display to avoid glare or reflections from overhead lighting or outside sources of light. • Keep the display screen clean and set the brightness and contrast to levels that allow you to see the screen clearly. •...
  • Page 16 Preface...

  • Page 17: Table Of Contents

    Preface Contents Notice .................I System Map: LCD Panel Open - Models G & H ..1-11 FCC Statement ..............II LED Indicators .............1-12 FCC RF Radiation Exposure Statement: ......III Hot Key Buttons & Keyboard ........1-13 Instructions for Care and Operation ........ V Keyboard - Models A - D ..........1-14 Power Safety ..............VII Keyboard - Models E - F ..........1-15...
  • Page 18 Preface DVD Regional Codes ............2-5 Conserving Battery Power ...........3-11 7-in-1 Card Reader ............2-6 Battery Life ..............3-12 ExpressCard Slot ............2-7 New Battery ..............3-12 Inserting and Removing ExpressCards ......2-7 Recharging the Battery with the AC/DC Adapter ..3-12 TouchPad and Buttons/Mouse ........2-8 Proper handling of the Battery Pack ......3-13 Audio Features ...............2-9 Battery FAQ ..............3-14 Adding a Printer ............2-10...
  • Page 19 Preface Wireless LAN Module ...........4-8 SATA Mode Selection (Advanced Menu) .....5-9 3.75G/HSPA Module .............4-8 Legacy USB Support (Advanced Menu) .......5-9 Fingerprint Reader Module ..........4-8 Boot-time Diagnostic Screen (Advanced Menu) ...5-9 Power on Boot Beep (Advanced Menu) ......5-10 BIOS Utilities Battery Low Alarm Beep (Advanced Menu) ....5-10 Embedded Shared Memory (Advanced Menu) ...5-10 Overview ................5-1 Security Menu ..............5-11...
  • Page 20 Preface Bluetooth Configuration in Windows Vista ....7-3 Upgrading and Adding New Hardware/Software ..8-5 PC Camera Module ............7-6 Problems and Possible Solutions ........8-7 PC Camera Driver Installation ........7-7 Screen Resolution Error ..........8-14 Wireless LAN Module ..........7-14 Interface (Ports & Jacks) 802.11b/g Driver Installation ........7-14 Connecting to a Wireless Network ......7-15 Notebook Ports and Jacks ..........A-2 3.75G/HSPA Module ...........7-19...
  • Page 21 Preface Security ................. D-4 Display Properties & SiS Utility Manager/ BIOS ................D-4 NVIDIA Control Panel ..........E-8 Storage ................D-4 SiS Video Driver Controls..........E-9 Audio ................D-4 Display Devices & Modes (SiS) ......... E-10 Keyboard ............... D-4 Attaching Other Displays (SiS) ........E-11 Pointing Device ............
  • Page 22 Preface Module Drivers ............E-33 Wireless LAN Module ..........F-17 Bluetooth Module ............E-34 802.11b/g Driver Installation ........F-18 PC Camera Module............E-39 3.75G/HSPA Module ...........F-19 WLAN Module............E-47 3G Watcher Application ..........F-20 3.75G/HSPA Module........... E-49 3G Watcher Application Installation ......F-20 Mobile Partner ............

  • Page 23: Quick Start Guide

    Quick Start Guide Chapter 1: Quick Start Guide Overview This Quick Start Guide is a brief introduction to the basic features of your computer, to navigating around the computer and to getting your system started. The remainder of the manual covers the following: •...

  • Page 24: Advanced Users

    Quick Start Guide Advanced Users If you are an advanced user you may skip over most of this Quick Start Guide. However you may find it useful to refer to “What to Install” on page 4 - “BIOS Utilities” on page 5 - 1 “Upgrading The Computer”...

  • Page 25: Not Included

    Quick Start Guide Not Included Operating Systems (e.g. Windows Vista/Windows 7/Windows XP) and applications (e.g. word processing, spreadsheet and database programs) have their own manuals, so please consult the appropriate manuals. This manual refers to the Windows Vista operating system (for specific driver information on Windows XP or Win- dows 7 see “Windows XP Information”...

  • Page 26: Model Differences

    Quick Start Guide Model Differences This notebook series includes eight different model types (each model includes different design styles) as indicated Table 1 - 1. The exact outward appearance and some of the Hot-Key buttons may appear slightly different from those illustrated in this manual, however all the ports, components and functions etc.

  • Page 27: System Startup

    Quick Start Guide System Startup Remove all packing materials. Place the computer on a stable surface. Securely attach any peripherals you want to use with the notebook (e.g. keyboard and mouse) to their ports. Attach the AC/DC adapter to the DC-In jack on the left of the computer, then plug the AC power cord into an outlet, and connect the AC power cord to the AC/DC adapter.

  • Page 28: Operating System Setup

    Quick Start Guide Operating System Setup If you are installing new system software, or are re-configuring your computer for a different system, make sure you configure the appropriate OS setting in the BIOS before installing a new operating system (Note: If you have installed the Windows Vista/Win 7 operating system with AHCI mode enabled, DO NOT disable AHCI mode or you will need to reinstall the Windows OS).

  • Page 29: System Software

    Quick Start Guide System Software Your computer may already come with system software pre-installed. Where this is not the case, or where you are re-configuring your computer for a different system, you will find the following operating systems are sup- ported.

  • Page 30: System Map: Lcd Panel Open - Models A & C

    Quick Start Guide System Map: LCD Panel Open - Models A & C Figure 1 - 3 LCD Panel Open (Model A & C Computers) Wireless Device Operation Aboard Aircraft Built-In PC Camera (Optional) The use of any portable electronic trans- mission devices aboard aircraft is usually prohibited.

  • Page 31: System Map: Lcd Panel Open - Models B & D

    Quick Start Guide System Map: LCD Panel Open - Models B & D Figure 1 - 4 LCD Panel Open (Model B & D Wireless Device Computers) Operation Aboard Aircraft Built-In PC Camera The use of any portable electronic trans- (Optional) mission devices aboard aircraft is usually prohibited.

  • Page 32: System Map: Lcd Panel Open - Models E & F

    Quick Start Guide System Map: LCD Panel Open - Models E & F Figure 1 - 5 LCD Panel Open (Model E & F Computers) Wireless Device Operation Aboard Aircraft Built-In PC Camera (Optional) The use of any portable electronic trans- mission devices aboard aircraft is usually prohibited.

  • Page 33: System Map: Lcd Panel Open - Models G & H

    Quick Start Guide System Map: LCD Panel Open - Models G & H Figure 1 - 6 LCD Panel Open (Model G & H Wireless Device Computers) Operation Aboard Aircraft Built-In PC Camera The use of any portable electronic (Optional) transmission devices aboard air- craft is usually prohibited.

  • Page 34: Led Indicators

    Quick Start Guide LED Indicators Icon Color Description The LED indicators on the computer display helpful Orange DC Power is Plugged In information about the current status of the computer. Green The Computer is On The Computer is in Sleep Icon Color Description...

  • Page 35: Hot Key Buttons & Keyboard

    Quick Start Guide Hot Key Buttons & Keyboard These buttons give instant access to the default Internet browser and e-mail program, and allow you to toggle the Silent Mode on/off with one quick button press. Hot Key Function Activate the Default E-Mail Browser (Note that In Windows 7 without Outlook/Outlook Express installed this button has no function.

  • Page 36: Keyboard - Models A - D

    Quick Start Guide Keyboard - Models A - D The keyboard (Models A - D) has an embedded numerical keypad for easy numeric Other Keyboards data input, and features function keys to allow you to change operational features in- stantly. See Table 1 - 6, on page 1 - 17 for full function key combination details.

  • Page 37: Keyboard - Models E - F

    Quick Start Guide Keyboard - Models E - F The keyboard (Models E - F) has a numerical keypad on the right for easy numeric data input, and features func- tion keys to allow you to change operational features instantly. See Table 1 - 6, on page 1 - 17 for full function key combination details.

  • Page 38: Keyboard - Models G - H

    Quick Start Guide Keyboard - Models G - H The keyboard (Models G - H) has a numerical keypad on the right for easy numeric data input, and features func- tion keys to allow you to change operational features instantly. See Table 1 - 6, on page 1 - 17 for full function key combination details.

  • Page 39: Function/Hot Key Indicators

    Quick Start Guide Function/Hot Key Indicators The function keys (F1 - F12 etc.) will act as hot keys when pressed while the Fn key is held down. In addition to the basic function key combinations; visual indicators are available when the hot key utility is installed (see “Hot Key”...

  • Page 40: System Map: Front & Left Views

    Quick Start Guide System Map: Front & Left Views Figure 1 - 10 Front & Left Views LED Indicators DC-In Jack External Monitor Port RJ-45 LAN Jack Vent/Fan Intake/ Outlet 2 * USB 2.0 Ports ExpressCard Slot (see page 7-in-1 Card Reader 7-in-1 Card Reader The card reader allows you to use the most popular digital storage card formats: MMC (MultiMedia Card) / SD (Secure Digital) / MS (Memory Stick) /...

  • Page 41: System Map: Right & Rear Views

    Quick Start Guide System Map: Right & Rear Views Figure 1 - 11 Right & Rear Views S/PDIF-Out Jack Microphone-In Jack Headphone-Out Jack USB 2.0 Port Optical Device Drive Bay (for CD/ DVD Device) RJ-11 Phone Jack Security Lock Slot Battery Note: Only one model is pictured here, however all...
  • Page 42 Quick Start Guide Changing DVD Regional Codes Disk Eject Warning Go to the Control Panel and double-click Device Don’t try to eject a CD/DVD while the system is ac- Manager (Hardware and Sound), then click the + cessing it. This may cause the system to “crash”. Stop next to DVD/CD-ROM drives.

  • Page 43: System Map: Bottom View - Models A - D

    Quick Start Guide System Map: Bottom View - Models A - D Figure 1 - 12 Bottom View (Model A - D Battery Information Computers) Always completely discharge, then fully Battery charge, a new battery before using it. Com- Bluetooth Module Model A &...

  • Page 44: System Map: Bottom View - Models E & F

    Quick Start Guide System Map: Bottom View - Models E & F Figure 1 - 13 Bottom View (Model E & F Computers) Battery Information Battery Always completely dis- RAM & CPU Bay charge, then fully charge, a new battery before using it. Cover Completely discharge and Vent/Fan Intake/...

  • Page 45: System Map: Bottom View - Models G & H

    Quick Start Guide System Map: Bottom View - Models G & H Figure 1 - 14 Bottom View (Model G & H Computers) Battery Information Battery Always completely dis- charge, then fully charge, a RAM & CPU Bay new battery before using it. Cover Completely discharge and Vent/Fan Intake/...

  • Page 46: Windows Vista Start Menu & Control Panel

    Quick Start Guide Windows Vista Start Menu & Control Panel Most of the control panels, utilities and programs within Windows Vista (and most other Windows versions) are accessed from the Start menu. When you install programs and utilities they will be installed on your hard disk drive, and a shortcut will usually be placed in the Start menu and/or the desktop.

  • Page 47: Video Features

    Quick Start Guide Video Features This computer features two different (either SiS for Model A, B, E & G computers or NVIDIA for Models C, D, F & H computers) video options. You can switch display devices, and configure display options, from the Display Settings control panel (in Personalization) in Windows Vista.

  • Page 48: Display Settings & Video Control Panel/Center

    Quick Start Guide Display Settings & Video Control Panel/Center Figure 1 - 16 - Display Settings & Video Control Panel/Center 1 - 26 Video Features...

  • Page 49: Power Options

    Quick Start Guide Power Options The Power Options (Hardware and Sound menu) control panel icon in Windows (see page 23) allows you to configure power management features for your computer. You can conserve power by means of power plans and configure the options for the power button, sleep button, computer lid (when closed), display and sleep mode from the left menu.
  • Page 50 Quick Start Guide 1 - 28...

  • Page 51: Features & Components

    Features & Components Chapter 2: Features & Components Overview Read this chapter to learn more about the following main features and components of the computer: • Hard Disk Drive • Optical (CD/DVD) Device • 7-in-1 Card Reader • ExpressCard Slot •...

  • Page 52: Hard Disk Drive

    Features & Components Hard Disk Drive The hard disk drive is used to store your data in the computer. The hard disk can be Power Safety taken out to accommodate other 2.5" serial (SATA) hard disk drives (see “Storage” on page D - 4) with a height of 9.5 mm.

  • Page 53: Optical (Cd/Dvd) Device

    Features & Components Optical (CD/DVD) Device There is a bay for a 5.25" optical (CD/DVD) device (12.7mm height). The actual de- Sound Volume vice will depend on the module you purchased (see “Storage” on page D - 4). The Adjustment optical device is usually labeled “Drive D:”...

  • Page 54: Handling Cds Or Dvds

    Features & Components Handling CDs or DVDs Proper handling of your CDs/DVDs will prevent them from being damaged. Please follow the advice below to make sure that the data stored on your CDs/DVDs can be CD Emergency Eject accessed. If you need to manually eject a CD (e.g.

  • Page 55: Dvd Regional Codes

    Features & Components DVD Regional Codes To change the DVD regional codes see “Changing DVD Regional Codes” on page 1 - DVD Regional Coding Table 2 - 1 Region Geographical Location DVD Regional Coding USA, Canada Western Europe, Japan, South Africa, Middle East &...

  • Page 56: 7-In-1 Card Reader

    Features & Components 7-in-1 Card Reader The card reader allows you to use some of the latest digital storage cards. Push the Card Reader Cover card into the slot and it will appear as a removable device, and can be accessed in the same way as your hard disk (s).

  • Page 57: Expresscard Slot

    Features & Components ExpressCard Slot The computer is equipped with an ExpressCard/34/54 slot that reads Express Card/ ExpressCard 34 and ExpressCard/54 formats. ExpressCards are the successors to PCMCIA (PC Slot Cover Cards). Make sure you install the Card Reader driver (see “CardReader”...

  • Page 58: Touchpad And Buttons/Mouse

    Features & Components TouchPad and Buttons/Mouse The TouchPad is an alternative to the mouse; however, you can also add a mouse to Mouse Driver your computer through one of the USB ports. The TouchPad buttons function in much the same way as a two-button mouse. If you are using an ex- ternal mouse your op- Once you have installed the TouchPad driver (see...

  • Page 59: Audio Features

    Features & Components Audio Features You can configure the audio options on your computer from the Sound control Sound Volume panel in Windows, or from the Realtek HD Audio Manager icon in the taskbar/ Adjustment control panel (right-click the taskbar icon to bring up an audio menu).

  • Page 60: Adding A Printer

    Features & Components Adding a Printer The most commonly used peripheral is a printer. The following conventions will Parallel Printer help you to add a printer; however it is always best to refer to the printer manual for specific instructions and configuration options. After setting up the print- er attach the parallel ca- ble to the printer.

  • Page 61: Power Management

    Power Management Chapter 3: Power Management Overview OS Note Power management To conserve power, especially when using the battery, your computer power man- functions will vary slight- agement conserves power by controlling individual components of the computer ly depending on your (the monitor and hard disk drive) or the whole system.

  • Page 62: The Power Sources

    Power Management The Power Sources The computer can be powered by either an AC/DC adapter or a battery pack. AC/DC Adapter Use only the AC/DC adapter that comes with your computer. The wrong type of AC/ DC adapter will damage the computer and its components. Attach the AC/DC adapter to the DC-in jack on the left of the computer.

  • Page 63: Turning On The Computer

    Power Management Turning on the Computer Now you are ready to begin using your computer. To turn it on simply press the pow- Shut Down er button on the front panel. Note that you should al- When the computer is on, you can use the power button as a Sleep/Hibernate hot- ways shut your comput- er down by choosing the key button when it is pressed for less than 4 seconds (pressing and holding the power...

  • Page 64: Power Plans

    Power Management Power Plans The computer can be configured to conserve power by means of power plans. You Resuming can use (or modify) an existing power plan, or create a new one. Operation The settings may be adjusted to set the display to turn off after a specified time, and Table 3 - 1, on to send the computer into Sleep after a period of inactivity.
  • Page 65 Power Management Each Windows power plan will also adjust the processor performance of your ma- chine in order to save power. This is worth bearing in mind if you are experiencing any reduced performance (especially under DC/battery power). Choose High performance for maximum performance when the computer is pow- ered from an AC power source.

  • Page 66: Power-Saving States

    Power Management Power-Saving States You can use power-saving states to stop the computer’s operation and restart where Power Button you left off. Sleep is the default power-saving state in Windows Vista. The Power Button Earlier versions of Windows used Stand By and Hibernate as system power-saving in the Start Menu (in Classic View use the states.

  • Page 67: Hibernate

    Power Management Hibernate Hibernate uses the least amount of power of all the power-saving states and saves all of your information on a part of the hard disk before it turns the system off. If a Hibernate Mode In power failure occurs the system can restore your work from the hard disk; if a power Windows Vista SP1 failure occurs when work is saved only to memory, then the work will be lost.

  • Page 68: Configuring The Power Buttons

    Power Management Configuring the Power Buttons The power/sleep button (Fn + F4 key combo) and closed lid may be set to send the Password computer in to a power-saving state. Protection It is recommended that you enable a password on wake up in order to protect your data.

  • Page 69: Resuming Operation

    Power Management Resuming Operation You can resume operation from power-saving states by pressing the power button, or in some cases pressing the sleep button (Fn + F4 key combo). Closing the Lid If you have chosen to Power Status To Resume Icon Color send the computer to...

  • Page 70: Battery Information

    Power Management Battery Information Please follow these simple guidelines to get the best use out of your battery. Low Battery Warning Battery Power When the battery is criti- Your computer’s battery power is dependent upon many factors, including the pro- cally low, immediately grams you are running, and peripheral devices attached.

  • Page 71: Conserving Battery Power

    Power Management Conserving Battery Power • Use a power plan that conserves power (e.g Power saver), however note that this may have an affect on computer performance. • Lower the brightness level of the LCD display. The system will decrease LCD brightness slightly to save power when it is not powered by the AC/DC adapter.

  • Page 72: Battery Life

    Power Management Battery Life Battery life may be shortened through improper maintenance. To optimize the life and improve its performance, fully discharge and recharge the battery at least once every 30 days. We recommend that you do not remove the battery yourself. If you do need to re- move the battery for any reason (e.g.

  • Page 73: Proper Handling Of The Battery Pack

    Power Management Proper handling of the Battery Pack • DO NOT disassemble the battery pack under any circumstances • DO NOT expose the battery to fire or high temperatures, it may explode Caution • DO NOT connect the metal terminals (+, -) to each other Danger of explosion if battery is incorrectly re- placed.

  • Page 74: Battery Faq

    Power Management Battery FAQ How do I completely discharge the battery? Use the computer with battery power until it shuts down due to a low battery. Don’t turn off the computer even if a message indicates the battery is critically low, just let the computer use up all of the battery power and shut down on its own.
  • Page 75 Power Management Scroll down to Battery and click + to expand the battery options. Choose the options below (click Yes if a warning appears): Figure 3 - 7 Power Options Advanced Settings - Battery • Low battery levels = 0% •...
  • Page 76 Power Management How do I fully charge the battery? When charging the battery, don’t stop until the LED charging indicator light changes from orange to green. How do I maintain the battery? Completely discharge and charge the battery at least once every 30 days or after about 20 partial discharges.

  • Page 77: Drivers & Utilities

    Drivers & Utilities Chapter 4: Drivers & Utilities What to Install This chapter deals with installing the drivers and utili- ties essential to the operation or improvement of some The Device Drivers & Utilities + User’s Manual disc of the computer’s subsystems. The system takes ad- contains the drivers and utilities necessary for the vantage of some newer hardware components for proper operation of the computer.

  • Page 78: Windows Vista Driver Installation

    Drivers & Utilities Windows Vista Driver Installa- Check the driver installation order from Table 4 - 1, on page 4 - 3 (the drivers must be installed in tion this order) which is the same as that listed in the Drivers Installer menu below.
  • Page 79 Drivers & Utilities Manual Driver Installation Driver - Windows Vista with Service Pack 1 Page Click Browse CD (button) in the Drivers Installer ap- plication and browse to the executable file in the ap- Video (see note below) Page 4 - 5 propriate driver folder.

  • Page 80: Updating/Reinstalling Individual Drivers

    Drivers & Utilities Updating/Reinstalling Individual Drivers User Account Control (Win Vista) If you wish to update/reinstall individual drivers it If a User Account Control prompt appears as part of may be necessary to uninstall the original driver.To do the driver installation procedure, click Continue or this go to the Control Panel in the Windows OS and Allow, and follow the installation procedure as direct- double-click the Programs and Features icon (Pro-...

  • Page 81: New Hardware Found

    Drivers & Utilities New Hardware Found Driver Installation Procedure If you see the message “New Hardware Found” dur- Insert the Device Drivers & Utilities + User’s Manual ing the installation procedure (other than when out- disc and click Install Drivers (button). lined in the driver install procedure), click Cancel Video/Audio Driver Installation Note to close the window, and follow the installation proce-...

  • Page 82: Audio

    Drivers & Utilities Audio 1. Click 1./2.Install Audio Driver > Yes. 1. Click 4.Install Lan Driver > Yes. 2. Click Next. 2. Click Next. 3. Click Finish to restart the computer. 3. Click Finish > Finish to restart the computer. 4.

  • Page 83: Optional Drivers

    Drivers & Utilities USB Hotfix Optional Drivers In order to resolve issues with USB devices (internal See the pages indicated for the driver installation pro- & external) in 4GB Windows Vista systems we rec- cedures for any modules included in your purchase op- ommend that you install the USB hotfix driver provid- tion.

  • Page 84: Pc Camera Module

    Drivers & Utilities Bluetooth Module 3.75G/HSPA Module Note: The operating system is the default setting for See the introduction in “3.75G/HSPA Module” on Bluetooth control in Windows Vista, and does not re- page 7 - 19, and check the installation procedure. quire a driver.

  • Page 85: Overview

    BIOS Utilities Chapter 5: BIOS Utilities Overview BIOS Screens Note that BIOS This chapter gives a brief introduction to the computer’s built-in software: screens pictured on the following pages are in- Diagnostics: The POST (Power-On Self Test) tended for guidance in setting up your system’s BIOS.

  • Page 86: The Power-On Self Test (Post)

    BIOS Utilities The Power-On Self Test (POST) Each time you turn on the computer, the system takes a few seconds to conduct a POST Screen POST, including a quick test of the on-board RAM (memory). 1.BIOS information As the POST proceeds, the computer will tell you if there is anything wrong. If there 2.CPU type is a problem that prevents the system from booting, it will display a system summary 3.Memory status...

  • Page 87: Failing The Post

    BIOS Utilities Failing the POST Errors can be detected during the POST. There are two categories, “fatal” and “non- fatal”. Fatal Errors These stop the boot process and usually indicate there is something seriously wrong with your system. Take the computer to your service representative or authorized service center as soon as possible.

  • Page 88: The Setup Program

    BIOS Utilities The Setup Program The Phoenix Setup program tells the system how to configure itself and manage ba- BIOS Settings sic features and subsystems (e.g. port configuration). Warning Entering Setup Incorrect settings can cause your system to To enter Setup, turn on the computer and press F2 during the POST. The prompt malfunction.

  • Page 89: Setup Screens

    BIOS Utilities Setup Screens The following pages contain additional advice on portions of the Setup. Setup Menus Along the top of the screen is a menu bar with menu headings. When you select a Setup menus heading, a new screen appears. Scroll through the features listed on each screen to shown in this section are make changes to Setup.

  • Page 90: Main Menu

    BIOS Utilities Main Menu PhoenixBIOS Setup Utility Figure 5 - 2 Main Main Advanced Security Boot Exit Main Menu Item Specific Help System Time: [22:12:05] System Date: [10/21/2009] SATA Port 1 [FUJITSU MHV2100BH PL] <Tab>, <Shift Tab>, or SATA Port 2 [Optiarc CDRWDVD CRX8] <Enter>...

  • Page 91: Sata Port 1/2 (Main Menu)

    BIOS Utilities SATA Port 1/2 (Main Menu) Pressing Enter opens the sub-menu to show the configuration of a optical Device/ HDD on the computer’s SATA Port 1/2. Use the Auto (Type:) setting to have the items configured automatically for you. System/Extended Memory (Main Menu) This item contains information on the system memory, and is not user configurable.

  • Page 92: Advanced Menu

    BIOS Utilities Advanced Menu PhoenixBIOS Setup Utility Main A A dvanced Advanced Security Boot Exit Item Specific Help Installed O/S: [Vista / Win SATA Mode Selection: [AHCI] Legacy USB Support: [Enabled] Select the operating Boot-time Diagnostic Screen: [Disabled] system installed Power on Boot Beep [Disabled] on your system which...

  • Page 93: Sata Mode Selection (Advanced Menu)

    BIOS Utilities SATA Mode Selection (Advanced Menu) This menu is only available if you select the Vista O/S as your operating system. You can configure SATA (Serial ATA) control to operate in either IDE (native/ compatible) or AHCI (Advanced Host Controller Interface) modes from this menu. The SATA mode should be set to AHCI mode for this system (unless you are sure your hard disk can only operate in IDE mode).

  • Page 94: Bios Utilities

    BIOS Utilities Security Menu PhoenixBIOS Setup Utility Security Menu Security Main Advanced S S e e c c u u r r i i t t y y Boot Exit Item Specific Help changes Supervisor Password Is: Clear make here affect the User Password Is: Clear Supervisor Password...

  • Page 95: Security Menu

    BIOS Utilities Set User Password (Security Menu) You can set a password for user mode access to the PhoenixBIOS Setup Utility. This will not affect access to the computer OS, (only the Setup utility) unless you Password Warning choose to set a Password on Boot (see below). Many menu items in the Phoenix- If you set a boot pass- BIOS Setup Utility cannot be modified in user mode.

  • Page 96: Boot Menu

    BIOS Utilities Boot Menu PhoenixBIOS Setup Utility BIOS Screens Main Advanced Security Boot Exit Item Specific Help Note that BIOS Boot priority order: screens pictured IDE CD: TSSTcorp CDDVD TS-L633A Keys used to view or these pages are intend- IDE HDD: FUJITSU MHV2160BH-(S1) configure devices: USB KEY:...

  • Page 97: Exit Menu

    BIOS Utilities Exit Menu Figure 5 - 6 PhoenixBIOS Setup Utility Main Advanced Security Boot Exit Exit Menu Item Specific Help Exit Saving Changes Exit Discarding Changes Exit System Setup and Load Setup Defaults save your changes to Discard Changes CMOS.
  • Page 98 BIOS Utilities 5 - 14...

  • Page 99: Overview

    Upgrading The Computer Chapter 6: Upgrading The Computer Overview This chapter contains information on upgrading the computer. Follow the steps out- lined to make the desired upgrades. If you have any trouble or problems you can con- Warranty Warning tact your service representative for further help. Before you begin you will need: Please check with your service representative...

  • Page 100: When Not To Upgrade

    Upgrading The Computer When Not to Upgrade These procedures involve opening the system’s case, adding and sometimes replac- ing parts. Power Safety Warning You should not perform any of these upgrades if: Before you undertake • Your system is still under warranty or a service contract upgrade proce- •...

  • Page 101: Removing The Battery

    Upgrading The Computer Removing the Battery If you are confident in undertaking upgrade procedures yourself, for safety reasons Warranty Warning it is best to remove the battery. Turn the computer off, and turn it over. Please check with your Slide the latch in the direction of the arrow.

  • Page 102: Upgrading The Hard Disk Drive

    Upgrading The Computer Upgrading the Hard Disk Drive The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard HDD System disk drives with a height of 9.5mm (h) (see “Storage” on page D - 4). Follow your Warning operating system’s installation instructions, and install all necessary drivers and util- ities (see...
  • Page 103 Upgrading The Computer Turn off the computer, and turn it over and remove the battery. Locate the hard disk bay cover and loosen screws & Remove the hard disk bay cover Models A & C Models B & D Figure 6 - 2 Hard Disk Bay Cover Removal Models E &...
  • Page 104 Upgrading The Computer Grip the tab and slide the hard disk in the direction of arrow Lift the hard disk out of the bay Figure 6 - 3 HDD Removal 6 - 6 Upgrading the Hard Disk Drive...
  • Page 105 Upgrading The Computer Remove the screw(s) & and the adhesive cover (depending on your model type/design). Reverse the process to install a new hard disk drive (do not forget to replace all the screws and covers). Figure 6 - 4 HDD Cover Removal Hard Disk Screws &...

  • Page 106: Upgrading The Optical (Cd/Dvd) Device

    Upgrading The Computer Upgrading the Optical (CD/DVD) Device Turn off the computer, and turn it over and remove the battery. Models A & C: Locate the RAM & CPU bay cover and remove screws Fan Cable & Cover Carefully (a fan and cable are attached to the under side of the cover) lift up Make sure you recon- the bay cover.
  • Page 107 Upgrading The Computer Remove the screw at point , and use a screwdriver to carefully push out the optical device at point Reverse the process to install the new device. Models A & C Models B - H Figure 6 - 6 (Only one model pictured) Removing the Optical Device...

  • Page 108: Upgrading The System Memory (Ram)

    Upgrading The Computer Upgrading the System Memory (RAM) The computer has two memory sockets for 200 pin Small Outline Dual In-line (SO- DIMM) DDRII (DDR2) type memory modules (see “Memory” on page D - 3 details of supported module types). Turn off the computer, and turn it over and remove the battery.
  • Page 109 Upgrading The Computer Carefully (a fan and cable are attached to the under side of the cover) lift up the bay cover. Carefully disconnect the fan cable , and remove the cover Figure 6 - 8 CPU/RAM Bay Cover Removed Fan Cable Make sure you reconnect the fan cable before screwing down the bay cover.
  • Page 110 Upgrading The Computer Gently pull the two release latches on the sides of the memory socket in the direction indicated by the arrows ( & Figure 6 - Figure 6 - 9 RAM Module Release Latches 6 - 12 Upgrading the System Memory (RAM)
  • Page 111 Upgrading The Computer The RAM module will pop-up, and you can remove it. Figure 6 - 10 RAM Module Removal Pull the latches to release the second module if necessary. Insert a new module holding it at about a 30° angle and fit the connectors firmly into the memory slot.
  • Page 112 Upgrading The Computer 11. Replace the bay cover (see sidebar) and screws (make sure you reconnect the fan cable before screwing down the bay cover). Figure 6 - 11 Cover Pin Alignment Models B & D Models E & F Cover Pins Note that Model B &...

  • Page 113: G/Hspa And Wlan Module Location

    Upgrading The Computer 3.75G/HSPA and WLAN Module Location The picture below indicates the location of the 3.75G/HSPA and WLAN modules for your information. Note that the 3.75G/HSPA module is a factory option, and the WLAN module is an option. Neither of these modules are user upgradeable/replace- able;...
  • Page 114 Upgrading The Computer 6 - 16...

  • Page 115: Overview

    Modules & Options Chapter 7: Modules & Options Overview Wireless Device Operation Aboard This chapter contains information on the following modules, which may come with Aircraft your computer, depending on the configuration purchased. If you are unsure please The use of any portable contact your service representative.

  • Page 116: Bluetooth Module

    Modules & Options Bluetooth Module The operating system’s Bluetooth Devices control panel is used to configure the Wireless Device Bluetooth settings in Windows Vista, and therefore does not require a driver. Use Operation Aboard the Fn + F12 key combination (see “Function/Hot Key Indicators”...

  • Page 117: Bluetooth Configuration In Windows Vista

    Modules & Options Bluetooth Configuration in Windows Vista Setup your Bluetooth Device so the Computer Can Find it Turn your Bluetooth device (e.g. PDA, mobile phone etc.) on. Bluetooth Taskbar Make the device discoverable (to do this check your device documentation). Icon If you cannot see the To Turn the Bluetooth Module On...
  • Page 118 Modules & Options To Add a Bluetooth Device Access the Bluetooth Devices control panel. Click Options (tab), and make sure that Allow Bluetooth devices to connect to this computer check box (Connections) has a tick inside it. Click Devices (tab), and then click Add. The Add Bluetooth Device Wizard will appear.
  • Page 119 Modules & Options To Change Settings for the Bluetooth Device Access the Bluetooth Devices control panel. Click on the device you want to change and click Properties to: Bluetooth Help • Change the name of the device (click General, type a new name and click OK). •...

  • Page 120: Pc Camera Module

    Modules & Options PC Camera Module Before installing the PC Camera driver, make sure that the optional PC Camera is Latest PC Camera on. Use the Fn + F10 key combination (see “Function/Hot Key Indicators” on Driver Information page 1 - 17) to toggle power to the PC Camera module.

  • Page 121: Pc Camera Module

    Modules & Options PC Camera Driver Installation 1. Insert the Device Drivers & Utilities + User’s Manual disc into the CD/ DVD drive. PC Camera Screen 2. Click Option Drivers (button). Refresh 3. Click 1.PC Camera, Web cam > Yes. The PC Camera module 4.
  • Page 122 Modules & Options PC Camera Audio Setup If you wish to capture video & audio with your camera, it is necessary to setup the audio recording options in Windows. Click Start, and click Control Panel (or point to Settings and click Control Panel). Click Sound (Hardware and Sound).
  • Page 123 Modules & Options Figure 7 - 5 Audio Setup for PC Camera Right-click PC Camera Module 7 - 9...
  • Page 124 Modules & Options Camera Application The WebCam application is a video viewer for general purpose video viewing and testing, and for capturing video files to .avi format. Pre-Allocating File Space Run the camera application from the desktop shortcut (it is recommended that you set the capture file before the capture process - see Set Capture File below).
  • Page 125 Modules & Options Reducing Video File Size Note that capturing high resolution video files requires a substantial amount of disk space for each file. After recording video, check the video file size (right-click the file and select Properties) and the remaining free space on your hard disk (go to My Computer, right-click the hard disk, and select Properties).
  • Page 126 Modules & Options Eliminating Screen Flicker If you find that the video screen in the camera program is flickering, you can try to adjust the setting in the Video Capture Filter options. Run the camera application from the desktop shortcut. Go to Options and scroll down to select Video Capture Filter..
  • Page 127 Modules & Options Zoom The WebCam program allows you to zoom the camera in and out (note the zoom function is not available in all camera model applications). Run the camera application from the desktop shortcut. Go to Zoom and select Zoom Out/Zoom In. Figure 7 - 7 Zoom/Setting Taking Still Pictures...

  • Page 128: 7 - 14 Wireless Lan Module

    Modules & Options Wireless LAN Module If you have included a 802.11b/g WLAN module in your purchase option, make sure Wireless Device that the Wireless LAN module is on before installing the driver. Operation Aboard Aircraft Use the Fn + F11 key combination (see “Function/Hot Key Indicators”...

  • Page 129: Connecting To A Wireless Network

    Modules & Options Connecting to a Wireless Network Make sure the Wireless LAN module is turned on. Click the taskbar wireless icon , and then click Connect to a network (or right- click the icon , and then click Connect to a network). Figure 7 - 8 Taskbar Menus Click icon...
  • Page 130 Modules & Options Click a network, and then click Connect. If you do not see a network you want to connect to, click Set up a connection or network (a list of options will appear allowing manual searching, and creating a new network).
  • Page 131 Modules & Options To disconnect from the wireless network you can click the taskbar wireless icon and then select Connect or disconnect to access the network menu, and click Disconnect (or right-click the icon , and then click Disconnect from). Security Enabled Networks You should try to make...

  • Page 132: Windows Mobility Center

    Modules & Options Windows Mobility Center The Windows Mobility Center control panel provides an easy point of access for information on battery status, power plans used and wireless device status etc. To access the Windows Mobility Center: Click Start, and click Control Panel (or point to Settings and click Control Panel).

  • Page 133: 3.75G/Hspa Module

    Modules & Options 3.75G/HSPA Module If you have included an optional 3.75G/HSPA (High Speed Packet Access) module (see “Communication” on page D - 5 for specification details) in your purchase op- 3.75G/HSPA Module Options tion, you will have the appropriate application (3G Watcher or Mobile Partner) provided for your particular module.
  • Page 134 Modules & Options Before installing the application, make sure that the 3.75G/HSPA module is on. Use the Fn+( ) key combination (see “Function/Hot Key Indicators” on page 1 17) to toggle power to the 3.75G/HSPA module. Make sure you install the drivers in the order indicated in Table 4 - 1, on page 4 - •...
  • Page 135 Modules & Options Turn off the computer, and turn it over and remove the battery. Access the SIMLOCK as follows: • For Models A - F: Locate the SIM card cover and loosen screw , and then Power Safety remove the SIM card cover Warning •...
  • Page 136 Modules & Options Insert the USIM card as you would into your mobile phone. Slide the SIMLOCK towards the hinge in order to release the lock and lift it up. Insert the USIM card as illustrated in (Figure 7 - 15) and close the SIMLOCK.

  • Page 137: 3G Watcher Application

    Modules & Options 3G Watcher Application With the 3.75G/HSPA module and USIM card (supplied by your service provider) installed you may then install the 3G Watcher application. The 3G Watcher appli- Wireless Device cation allows you to directly access your HSPA internet service from the computer. Operation Aboard Aircraft 3G Watcher Application Installation...
  • Page 138 Modules & Options Setting Up a Carrier Profile Although the connection information is stored on the USIM card supplied by the ser- vice provider, you will need to set up the appropriate carrier profile in 3G Watcher. Power on the 3.75G/HSPA module using the Fn + key combination.
  • Page 139 Modules & Options You can then enter a new profile name or choose a profile from the drop-down list provided by the software (see the sidebars for information on the profile details). Figure 7 - 18 User Options Profile Information Click General and/or Ad- Profile Details vanced (and the sub-...
  • Page 140 Modules & Options Connecting to the Service Provider Power on the 3.75G/HSPA module using the Fn + key combination. You can access the 3G Watcher application from the Start menu (Start > Programs/All Programs > Sierra Wireless > 3G Watcher), or by clicking the desktop icon The software will run and display the service provider name (see “Setting Up a...
  • Page 141 Modules & Options When the connection is successful a taskbar notification will appear (as below). Figure 7 - 22 Connected Taskbar Notification You can then access the internet, download e-mail etc. as per any internet connection. While you are connected the taskbar icon will be green (it will be red when the program is running but not connected).
  • Page 142 Modules & Options 12. If you click the 3G Watcher close icon a message will be displayed asking you to click OK to confirm the program exit. Figure 7 - 24 Exit Warning 13. Exiting the program DOES NOT turn off the 3.75G/HSPA module, and you will need to press the Fn + key combination to turn off the module (pay careful attention to this aboard aircraft - see...

  • Page 143: Short Messaging Service

    Modules & Options Short Messaging Service In addition to standard internet services you may also send and receive SMS text messages using the 3G Watcher program, if your service supports SMS. Reading SMS Messages The SMS message indicator in the main window will notify you of any new messages received.

  • Page 144: Mobile Partner

    Modules & Options Mobile Partner With the 3.75G/HSPA module and USIM card (supplied by your service provider) installed you may then install the Mobile Partner application. The Mobile Partner Wireless Device application allows you to directly access your HSPA internet service from the com- Operation Aboard Aircraft puter.

  • Page 145: Mobile Partner Application

    Modules & Options Mobile Partner Application You will need to contact your service provider to obtain the exact details of how ex- actly to configure the settings on this page. Mobile Partner Help Profile Management To get help on Mobile Partner configuration Power on the 3.75G/HSPA module using the Fn +...
  • Page 146 Modules & Options Connecting to the Service Provider Power on the 3.75G/HSPA module using the Fn + key combination. Access the Mobile Partner application from the Start menu (Start > Programs/ All Programs > Mobile Partner), or by double-clicking the Mobile Partner icon on the desktop The software will run and you can select the Profile Name from the menu.
  • Page 147 Modules & Options When the connection is successful you can move the cursor over the network icon in the taskbar to display the connection information. Figure 7 - 28 Connected Taskbar Notification You can then access the internet, download e-mail etc. as per any internet connection.
  • Page 148 Modules & Options 11. The module will still be on, and you will need to press the Fn + key combination to turn it off. 12. If you click the Mobile Partner close icon a message will be displayed asking you to click OK to confirm the program exit and to terminate the connection.

  • Page 149: Text Messaging Service

    Modules & Options Text Messaging Service In addition to standard internet services you may also send and receive SMS text messages using the Mobile Partner program, if your service supports SMS. Reading SMS Messages An icon will blink at the bottom of the Mobile Partner interface to notify you of any new messages received.

  • Page 150: 7 - 36 Fingerprint Reader Module

    Modules & Options Fingerprint Reader Module If you have included the (optional) fingerprint reader in your purchase option you Help & Manual will need to install the driver as per the instructions below. Right-click the taskbar icon Make sure you have administrator’s rights to your computer, and have a Windows to bring up the menu to password enabled for full security protection.

  • Page 151: User Enrollment

    Modules & Options User Enrollment Click Start > Programs/All Programs > Protector Suite QL > User Enrollment, or double click the taskbar icon Click Initialize. Figure 7 - 31 Initialize Fingerprints On the first run of the program you will be asked to click the button to accept the license, and then click OK.
  • Page 152 Modules & Options If you have not set a Windows password you will be prompted to do so (note: If you have not set a password Protector Suite QL cannot secure access to your computer). Click Next. You will then be prompted to enter your Windows password and click Next. Select either to use the fingerprint reader alone for authentication, or choose both the fingerprint reader and the Windows password, and then click Next.
  • Page 153 Modules & Options 11. Click the button above any of the fingers to begin the enrollment process for that finger. 12. Swipe the finger five times to enroll that finger. Fingerprint 13. Repeat the process for all the fingers you wish to enroll (see sidebar), and then Enrollment click Next.
  • Page 154 Modules & Options 17. Right-click the taskbar icon to bring up the Control Center that allows you to Edit Fingerprints, register applications, manage Password Bank, File Safe and access the Help menu etc. You can also run the Control Center etc. from the Protector Suite QL item in the Programs/All Programs menu.

  • Page 155: Fingerprint Control Center Features

    Modules & Options Fingerprint Control Center Features Application Launcher The Application Launcher allows you to register applications to be launched when assigned to a particular finger. Simply copy the application icon on to one of the reg- istered fingers and ten click OK to close the application window. Once registered the application will launch when you swipe the appropriate finger across the sensor.
  • Page 156 Modules & Options 7 - 42...

  • Page 157: Troubleshooting

    Troubleshooting Chapter 8: Troubleshooting Overview Should you have any problems with your computer, before consulting your service representative, you may want to try to solve the problem yourself. This chapter lists some common problems and their possible solutions. This can’t anticipate every problem, but you should check here before you panic. If you don’t find the answer in these pages, make sure you have followed the instructions carefully and observed the safety precautions in the preface.

  • Page 158: Basic Hints And Tips

    Troubleshooting Basic Hints and Tips Many of the following may seem obvious but they are often the solution to a problem when your computer ap- pears not to be working. • Power - Is the computer actually plugged into a working electrical outlet? If plugged into a power strip, make sure it is actually working.

  • Page 159: Backup And General Maintenance

    Troubleshooting Backup and General Maintenance • Always backup your important data, and keep copies of your OS and programs safe, but close to hand. Don’t forget to note the serial numbers if you are storing them out of their original cases, e.g. in a CD wal- let.

  • Page 160: Viruses

    Troubleshooting Viruses • Install an Anti-Virus program and keep the definitions file (the file which tells your program which viruses to look for) up to date. New computer viruses are discovered daily, and some of them may seriously harm your computer and cause you to lose data. Anti-Virus programs are commercially available and the defini- tions file updates are usually downloadable directly from the internet.

  • Page 161: Upgrading And Adding New Hardware/Software

    Troubleshooting Upgrading and Adding New Hardware/Software • Do not be tempted to make changes to your Windows Registry unless you are very sure of what you are doing, otherwise you will risk severely damaging your system. • Don’t open your computer or undertake any repair or upgrade work if you are not comfortable with what you are doing.
  • Page 162 Troubleshooting • Thoroughly check any recent changes you made to your system as these changes may affect one or more system components, or software programs. If possible, go back and undo the change you just made and see if the problem still occurs. •...

  • Page 163: Problems And Possible Solutions

    Troubleshooting Problems and Possible Solutions Problem Possible Cause - Solution You turned on the power but it doesn’t Battery missing / incorrectly installed. Check the battery bay, make sure the work. battery is present and seated properly (the design of the battery only allows it to go in one way).
  • Page 164 Troubleshooting Problem Possible Cause - Solution The computer feels too hot. Make sure the computer is properly ventilated and the Vent/Fan intakes are not blocked. If this doesn’t cool it down, put the system into Hibernate mode or turn it off for an hour. Make sure the computer isn’t sitting on a thermal surface (see “Overheating”...
  • Page 165 Troubleshooting Problem Possible Cause - Solution You forget the boot password. If you forget the password, you may have to discharge the battery of the CMOS. Contact your service representative for help. Password Warning If you choose to set a boot password, NEVER forget your password. The consequences of this could be serious. If you cannot remember your boot password you must contact your vendor and you may lose all of the information on your hard disk.
  • Page 166 Troubleshooting Problem Possible Cause - Solution Other Keyboards If your keyboard is damaged or you just want to make a change, you can use any standard USB keyboard. The system will detect and enable it automatically. However special functions/hot keys unique to the system’s regular keyboard may not work.
  • Page 167 Troubleshooting Problem Possible Cause - Solution The PC Camera module cannot be The module is off. Press the Fn + F10 key combination in order to enable the detected. module (see “Function/Hot Key Indicators” on page 1 - 17). Run the BisonCap program to view the camera picture.
  • Page 168 Troubleshooting Problem Possible Cause - Solution The Hibernate function has disappeared. You have a computer with 4GB of RAM and have installed Windows Vista Serv- ice Pack 1. This is a known issue if your computer has 4GB of RAM and is run- ning Windows Vista Service Pack 1.
  • Page 169 Troubleshooting Problem Possible Cause - Solution USB Hotfix You have a computer with 4GB of RAM and are having problems with USB de- vices (with both internal and external USB devices). This is a known issue and The computer’s USB devices “hang” can be resolved by installing the USB hotfix provided on the Device Drivers &...

  • Page 170: Screen Resolution Error

    Troubleshooting Screen Resolution Error If you are experiencing either screen resolution reduction, or screen flickering after resuming from Sleep in Windows Vista only then follow the instructions below to fix this problem. This error arises in compliance with Windows Vista policy, which triggers TMM (Transient Multi-Monitor Manager) when the notebook lid (S3) is closed.
  • Page 171 Troubleshooting Double-click Task Scheduler Library > Microsoft > Windows. Click MobilePC to open the control panel. Right-click TMM and select Disable. Figure 8 - 2 - TMM Disable Close all the control panels. Screen Resolution Error 8 - 15...
  • Page 172 Troubleshooting 8 - 16...

  • Page 173: Interface (Ports & Jacks)

    Interface (Ports & Jacks) Appendix A: Interface (Ports & Jacks) Overview The following chapter will give a quick description of the interface (ports & jacks) which allow your computer to communicate with external devices, connect to the internet etc. Interface (Ports & Jacks) A - 1...

  • Page 174: Notebook Ports And Jacks

    Interface (Ports & Jacks) Notebook Ports and Jacks Item Description Card Reader Port The card reader allows you to use some of the latest digital storage cards. Push the card into the slot and it will appear as a removable device. DC-In Jack Plug the supplied AC/DC adapter into this jack to power your computer.
  • Page 175 Interface (Ports & Jacks) Item Description RJ-45 LAN Jack This port supports LAN (Network) functions. Note: Broadband (e.g. ADSL) modems usually connect to the LAN port. Security Lock Slot To prevent possible theft, a Kensington-type lock can be attached to this slot. Locks can be purchased at any computer store.
  • Page 176 Interface (Ports & Jacks) A - 4...

  • Page 177: Sis Video Driver Installation

    SIS Video Driver Controls Appendix B: SIS Video Driver Controls The basic settings for configuring the LCD are outlined in “Video Features” on page 1 - SIS Video Driver Installation Function Key Combination Make sure you install the drivers in the order indicated in Table 4 - 1, on page 4 - You can use the Fn + Insert the Device Drivers &...

  • Page 178: B - 2 Sis Vga Control Center

    SIS Video Driver Controls SIS VGA Control Center More advanced video configuration options are provided by the SIS VGA Control Aero Themes and Center. Auto-Hide Taskbar Click Start, and click Control Panel (or point to Settings and click Control Panel). Do not use an Aero Double-click SiS VGA Control Center (click “Classic View”...
  • Page 179 SIS Video Driver Controls You may make changes to the video and display settings by clicking the appropriate menu button. Figure B - 2 SIS VGA Control Center Control Panels SIS VGA Control Center B - 3...
  • Page 180 SIS Video Driver Controls Display Devices & Options Besides the built-in LCD, you can also use an external VGA monitor (CRT) or ex- ternal Flat Panel Display as your display device. A VGA monitor/Flat Panel Dis- Switching Displays play connects to the external monitor port. The following display modes are in Windows 7 available.

  • Page 181: Attaching Other Displays

    SIS Video Driver Controls Attaching Other Displays Besides the built-in LCD, you can also use an external monitor (CRT)/flat panel dis- Switching Displays play as your display device. Connect it to the external monitor port on the left of the in Windows 7 computer, and configure the displays from SiS VGA Control Center : See page...

  • Page 182: B - 6 To Enable A Display Setting Mode

    SIS Video Driver Controls To Enable a Display Setting Mode Attach your external display to the external monitor port and turn it on. Go to the SiS VGA Control Center > Display Setting menu Click the appropriate icon for the display setting mode you wish to use. Click Yes within 15 seconds in order to save the setting change.
  • Page 183 SIS Video Driver Controls Using Display Settings to Enable Extended Mode Attach your external display to the external monitor port, and turn it on. Open the Display Settings control panel (see “Video Features” on page 1 - 25). Display Settings Click the monitor icon (e.g.
  • Page 184 SIS Video Driver Controls B - 8...

  • Page 185: Nvidia Video Driver Controls

    NVIDIA Video Driver Controls Appendix C: NVIDIA Video Driver Controls The basic settings for configuring the LCD are outlined in “Video Features” on page 1 - Resolution Error NVIDIA Video Driver Installation If you are experiencing Make sure you install the drivers in the order indicated in Table 4 - 1, on page 4 - screen resolution...

  • Page 186: C - 2 Nvidia Control Panel

    NVIDIA Video Driver Controls NVIDIA Control Panel More advanced video configuration options are provided in the NVIDIA Control Panel tab. Click Start, and click Control Panel (or point to Settings and click Control Panel). Double-click NVIDIA Control Panel (click “Classic View” from the left of the menu if you are in Control Panel Home).
  • Page 187 NVIDIA Video Driver Controls The NVIDIA Control Panel provides additional video configuration controls and tools which allow quick access to features such as display configuration, 3D Settings and Help menus etc. Navigating the Control Panel Navigate through the control panels in much the same way as you would a web page.
  • Page 188 NVIDIA Video Driver Controls The Help menus provide index and search features, and direct links to the NVIDIA website etc. Figure C - 3 Help Menus C - 4 NVIDIA Control Panel...

  • Page 189: Attaching Other Displays

    NVIDIA Video Driver Controls Attaching Other Displays Configuring an External Display in Windows Vista Display Devices Attach your external display to the external monitor port and turn it on. Besides built-in If a New Display Detected window does not appear in Windows Vista, go to the LCD, you can also use Windows Mobility Center control panel (Mobile PC >...
  • Page 190 NVIDIA Video Driver Controls Configuring an External Display using the NVIDIA Control Panel Alternatively you can use the NVIDIA control panel to configure any attached dis- plays. Attach your external display to the external monitor port and turn it on. Go to NVIDIA Control Panel (see “NVIDIA Control Panel”...

  • Page 191: Display Modes

    NVIDIA Video Driver Controls Display Modes Single Display Mode Resolution Error Only one of your displays is used. If you are experiencing screen resolution prob- Clone Mode lems/screen flickering after Clone Mode simply shows an exact copy of the Primary display desktop on the other resuming from Sleep in display(s).
  • Page 192 NVIDIA Video Driver Controls Using New Display Detected to Enable Extended Mode Attach your external display to the external monitor port and turn it on. If a New Display Detected window does not appear in Windows Vista, go to the Windows Mobility Center control panel (Mobile PC >...
  • Page 193 NVIDIA Video Driver Controls Using Display Settings to Enable Extended Mode Attach your external display to the external monitor port and turn it on. Click Start, and click Control Panel (or point to Settings and click Control Display Settings Panel). Extended Desktop Click Adjust screen resolution under the Appearance and Personalization menu (or double-click Personalization >...
  • Page 194 NVIDIA Video Driver Controls C - 10...

  • Page 195: Specifications

    Specifications Appendix D: Specifications Latest Specification Information The specifications listed in this Appendix are correct at the time of going to press. Certain items (particularly processor types/ speeds and CD/DVD device types) may be changed, delayed or updated due to the manufacturer's release schedule. Check with your service center for details.

  • Page 196: Processor

    Specifications Feature Specification Processor Intel® Core™2 Duo Processor 45nm (45 Nanometer) Process Technology (478-pin) Micro-FC-PGA Package, Socket P 3MB On-die L2 Cache & 800MHz FSB - TDP 35W T8100/ T8300 2.1/ 2.4 GHz Intel® Core™2 Duo Processor 45nm (45 Nanometer) Process Technology (478-pin) Micro-FC-PGA Package, Socket P 6MB On-die L2 Cache &...

  • Page 197: Core Logic

    Specifications Feature Specification Core Logic Models A, B, E & G: Models C, D, F & H: SiS M672 + SiS968 Chipset SiS 671DX + SiS968 Chipset Models A & C: Models B & D: 14.1" WXGA/ WXGA+ Glare Type TFT LCD 15.4"...

  • Page 198: Security

    Specifications Feature Specification Security Security (Kensington® Type) Lock Slot BIOS Password Fingerprint ID Reader Module (Factory Option) BIOS One 8Mb SPI Flash ROM Phoenix™ BIOS Storage One Changeable 12.7mm(h) Optical Device (CD/DVD) Type Drive (see “Optional” on page D - 6) Easy Changeable 2.5"...

  • Page 199: Card Slots

    Specifications Feature Specification Card Slots One ExpressCard/34(54) Slot Two Mini-Card Slots with USB interface: Slot 1 for WLAN Module Slot 2 for 3.75G/HSPA Module (Factory Option) Communication 56K Fax Modem Built-In 10M/100Mb Base-TX Ethernet LAN 802.11b/g Wireless LAN Mini-Card Module with USB interface (Option) 1.3M or 2.0M Pixel USB PC Camera Module (Factory Option) UMTS Modes Bluetooth 2.1 + EDR (Enhanced Data Rate) Module (Factory Option)

  • Page 200: Weight

    Specifications Feature Specification Operating Windows® Vista (with Service Pack 1) Systems Windows® XP (with Service Pack 3) Windows® 7 Environmental Temperature Relative Humidity ° ° Spec Operating: C - 35 Operating: 20% - 80% Non-Operating: -20°C - 60°C Non-Operating: 10% - 90% Dimensions Models A &...

  • Page 201: Windows Xp Information

    Windows XP Information Appendix E: Windows XP Information This Appendix contains information (including control panel information, driver installation etc.) for users of the Windows XP OS. E - 1...

  • Page 202: Dvd Regional Codes

    Windows XP Information DVD Regional Codes Changing DVD Regional Codes Go to the Control Panel and double-click System > Hardware (tab), click Device Manager, then click the + next to DVD/CD-ROM drives. Double-click on the DVD-ROM device to bring up the Properties dialogue box, and select the DVD Region (tab) to bring up the control panel to allow you to adjust the regional code.

  • Page 203: Windows Xp Start Menu & Control Panel

    Windows XP Information Windows XP Start Menu & Control Panel Most of the control panels, utilities and programs within Windows XP (and most other Windows versions) are accessed from the Start menu. When you install programs and utilities they will be installed on your hard disk drive, and a shortcut will usually be placed in the Start menu and/or the desktop.

  • Page 204: E - 4 Touchpad And Buttons/Mouse

    Windows XP Information TouchPad and Buttons/Mouse The TouchPad is an alternative to the mouse; however, you can also add a mouse to your computer through one of the USB ports. The TouchPad buttons function in much the same way as a two-button mouse. Once you have installed the TouchPad driver (see “TouchPad”...

  • Page 205: Function Keys/Hot Key Indicators

    Windows XP Information Function Keys/Hot Key Indicators The function keys (F1 - F12 etc.) will act as hot keys when pressed while the Fn key is held down. In addition to the basic function key combinations; visual indicators are available when the hot key utility is installed (see “Hot Key”...

  • Page 206: Audio Features

    Windows XP Information Audio Features You can configure the audio options on your computer from the Sounds and Audio Devices Windows con- trol panel, or from the Realtek HD Audio Manager icon in the taskbar/control panel (this will bring up the Realtek Audio Configuration menus).

  • Page 207: Video Features

    Windows XP Information Video Features This computer features two different (either SiS for Model A, B, E & G computers or NVIDIA for Models C, D, F & H computers) video options. You can switch display devices, and configure display options, from the Display Properties control panel in Windows as long as the appropriate video driver is installed.

  • Page 208: Display Properties & Sis Utility Manager/Nvidia Control Panel

    Windows XP Information Display Properties & SiS Utility Manager/NVIDIA Control Panel Right-click taskbar icon Right-click desktop Figure E - 5 - Display Properties & Video Control Panels E - 8 Video Features...

  • Page 209: Sis Video Driver Controls

    Windows XP Information SiS Video Driver Controls (Models A, B, E & G) Function Key Access the SiS Utility Manager as indicated on page E - 7. You may make changes Combination to the video and display settings by clicking the appropriate menu button. You can use the Fn + F7 key combination to toggle through the dis-...

  • Page 210: Display Devices & Modes (Sis

    Windows XP Information Display Devices & Modes (SiS) Besides the built-in LCD, you can also use an external VGA monitor (CRT) or external Flat Panel Display as your display device. A VGA monitor/Flat Panel Display connects to the external monitor port. The following display modes are available.

  • Page 211: Attaching Other Displays (Sis

    Windows XP Information Attaching Other Displays (SiS) If you prefer to use a monitor or flat panel display as your display device, then con- nect it to the external monitor port on the left of the computer. Secondary Device Click to put a tick in the Attach your external display to the external monitor port, and turn it on.
  • Page 212 Windows XP Information To Enable Extended Desktop (Windows Display Properties) Attach your external monitor to the external monitor port, and turn it on. Click Start, point to Settings (or click Control Panel) and click Control Panel (if you are in Category View choose Appearance and Themes).

  • Page 213: Nvidia Video Driver Controls

    Windows XP Information NVIDIA Video Driver Controls (Models C, D, F & H) Navigating the Access the NVIDIA Control Panel as indicated on page E - 7. You may make Control Panel changes to the video and display settings by clicking the appropriate menu item. Navigate through the control panels in much the same way as you...

  • Page 214: Display Devices And Modes (Nvidia

    Windows XP Information Display Devices and Modes (NVIDIA) Besides the built-in LCD, you can also use an external VGA monitor (CRT) or external Flat Panel Display as your display device. A VGA monitor/Flat Panel Display connects to the external monitor port. The following display modes are available.

  • Page 215: Attaching Other Displays (Nvidia

    Windows XP Information Attaching Other Displays (NVIDIA) Attach your external display to the external monitor port and turn it on (see sidebar). Go to the NVIDIA Control Panel. Function Key Click Display, and then click Set Up Multiple Displays. Combination You can use the Fn + F7 key combination to tog- gle through some dis-...
  • Page 216 Windows XP Information To Enable Extended Desktop (Windows Display Properties) Attach your external monitor to the external monitor port, and turn it on. Click Start, point to Settings (or click Control Panel) and click Control Panel (if you are in Category View choose Appearance and Themes).

  • Page 217: Power Management Features

    Windows XP Information Power Management Features To conserve power, especially when using the battery, your computer uses the ACPI OS Note power management system. Power management conserves power by controlling in- dividual components of the computer (the monitor and hard disk drive) or the whole Power management system.

  • Page 218: The Power Sources

    Windows XP Information The Power Sources The computer can be powered by either an AC/DC adapter or a battery pack. AC/DC Adapter Use only the AC/DC adapter that comes with your computer. The wrong type of AC/DC adapter will damage the computer and its components.

  • Page 219: Turning On The Computer

    Windows XP Information Turning On the Computer Now you are ready to begin using your computer. To turn it on simply press the pow- Shutdown er button on the front panel. Note that you should al- When the computer is on, you can use the power button as a Stand by/Hibernate/ ways shut your comput- er down by choosing the Shutdown hot-key button when it is pressed for less than 4 seconds (pressing and...

  • Page 220: Power Schemes

    Windows XP Information Power Schemes You can set your computer to conserve power through individual components by Resuming means of Power Schemes. You can also adjust the settings for each scheme to set Operation the monitor to turn off after a specified time, and the computer's hard disk motor to turn off if the hard disk drive has not been accessed for a specified period of time (if Press a key on the key- the system reads or writes data, the hard disk motor will be turned back on).
  • Page 221 Windows XP Information Each Windows Power Scheme will also adjust the processor performance of your machine in order to save pow- er. This is worth bearing in mind if you are experiencing any reduced performance (especially under DC/battery power). Choose the Home/Office Desk scheme for maximum performance when the computer is powered from an AC power source.

  • Page 222: Hibernate Mode Vs. Shutdown

    Windows XP Information System Power Options You can use the system power options to stop the computer’s operation and restart Stand by/Hibernate where you left off. This system features Stand by and Hibernate sleep mode levels or Shutdown Error (Hibernate mode will need to be enabled by clicking the option in the Hibernate tab in the Power Options control panel - see “Hibernate”...
  • Page 223 Windows XP Information Stand by Stand by saves the least amount of power, but takes the shortest time to return to full operation. During Stand by the hard disk is turned off, and the CPU is made to idle System Resume at its slowest speed.

  • Page 224: E - 24 Configuring The Power Button

    Windows XP Information Configuring the Power Button The power button may be set to send the computer in to either Stand by or Hiber- Sleep Button nate mode. In Stand by mode, the LED will blink green. In Hibernate mode the LED will be off (battery) or orange (AC/DC adapter).

  • Page 225: Battery Information

    Windows XP Information Battery Information Please follow these simple guidelines to get the best use out of your battery. Low Battery New Battery Warning Always completely discharge, then fully charge, a new battery (see “Battery FAQ” When the battery is criti- on page E - 28 for instructions on how to do this).

  • Page 226: Recharging The Battery With The Ac/Dc Adapter

    Windows XP Information Battery life may be shortened through improper maintenance. To optimize the life and improve its perfor- mance, fully discharge and recharge the battery at least once every 30 days. We recommend that you do not remove the battery yourself. If you need to remove the battery for any reason, “Removing the Battery”...
  • Page 227 Windows XP Information Proper handling of the Battery Pack • DO NOT disassemble the battery pack under any circumstances • DO NOT expose the battery to fire or high temperatures, it may explode • DO NOT connect the metal terminals (+, -) to each other Damaged Battery Warning Should you notice any physical defects (e.g.

  • Page 228: Battery Faq

    Windows XP Information Battery FAQ How do I completely discharge the battery? Use the computer with battery power until it shuts down due to a low battery. Don’t Caution turn off the computer by yourself even when you see a message that indicates the bat- Danger of explosion if tery is critically low, just let the computer use up all of the battery power and shut battery is incorrectly re-...

  • Page 229: E - 30 Windows Xp Driver Installation

    Windows XP Information Windows XP Driver Installation 1. Check the driver installation order from Table E - 5 (the drivers must be installed in this order) which is the Insert the Device Drivers & Utilities + User’s Manual same as that listed in the Drivers Installer menu below.

  • Page 230: Updating/Reinstalling Individual Drivers

    Windows XP Information Updating/Reinstalling Individual Drivers WinXP SP2 Driver Page # If you wish to update/reinstall individual drivers it may be necessary to uninstall the original driver.To do this go Video Page E - 31 to the Control Panel in the Windows OS and double- click the Add/Remove Programs item.

  • Page 231: Driver Installation Procedure

    Windows XP Information Driver Installation Procedure Insert the Device Drivers & Utilities + User’s Manual disc and click Install Drivers (button). Windows XP Service Pack 3 Make sure you install Windows XP Service Pack 3 (or a Video Windows XP version which includes Service Pack 3) be- 1.
  • Page 232 Windows XP Information Audio 1. Click 2.Install Audio Driver > Yes. 1. Click 4.Install Lan Driver > Yes. 2. Click Next. 2. Click Next. 3. Click Finish to restart the computer. 3. Click Finish > Finish to restart the computer. 4.

  • Page 233: Module Drivers

    Windows XP Information Module Drivers Wireless LAN, Bluetooth & 3.75G/HSPA Mod- ules See the following pages for the driver installation pro- cedures for any of the optional modules included in your purchase configuration. Wireless Device Operation Aboard Aircraft The use of any portable electronic transmission devices aboard aircraft is usually prohibited.

  • Page 234: Bluetooth Module

    Windows XP Information Bluetooth Module The operating system’s Bluetooth Devices control panel is used to configure the Bluetooth settings in Windows XP, and therefore does not require a driver. Use the Fn + F12 key combination (see “Function Keys/Hot Key Indicators”...
  • Page 235 Windows XP Information Bluetooth Local Area Connection Icon If you want to display the Local Area Connection icon for the Bluetooth connection in the taskbar, set it up as follows: Wireless Device Operation Aboard Access the Network Connections control panel in Windows (Start > Settings > Aircraft Network Connections OR Start >...

  • Page 236: Bluetooth Configuration In Windows Xp

    Windows XP Information Bluetooth Configuration in Windows XP Setup your Bluetooth Device so the Computer Can Find it 1. Turn your Bluetooth device (e.g. PDA, mobile phone etc.) on. Bluetooth Taskbar 2. Make the device discoverable (to do this check your device documentation). Icon To Turn the Bluetooth Module On If you cannot see the...

  • Page 237: To Add A Bluetooth Device

    Windows XP Information To Add a Bluetooth Device Access the Bluetooth Devices control panel. Click Options (tab), and make sure that Allow Bluetooth devices to connect to this computer check box (Connections) has a tick inside it. Click Devices (tab), and then click Add. The Add Bluetooth Device Wizard will appear.
  • Page 238 Windows XP Information To Change Settings for the Bluetooth Device 1. Access the Bluetooth Devices control panel. 2. Click on the device you want to change and click Properties to: • Change the name of the device (click General, type a new name and click OK). •...

  • Page 239: Pc Camera Module

    Windows XP Information PC Camera Module Before installing the optional PC Camera module driver use the Fn + F10 key com- bination to toggle power to the module. Taking Still Pictures Double-click There are three camera modules available with this computer model series. You will Computer icon on the have the appropriate application installed for your camera.
  • Page 240 Windows XP Information PC Camera Driver Installation 1. Make sure the module is powered on, and then insert the Device Drivers & Utilities + User’s Manual disc into the CD/DVD drive. 2. Click Option Drivers (button). 3. Click 1.PC Camera, Web cam > Yes. 4.
  • Page 241 Windows XP Information PC Camera Audio Setup (all camera modules) If you wish to capture video & audio with your camera, it is necessary to setup the audio recording options in Windows. Go to the Start menu and point to Settings (or just click Control Panel) and click Control Panel, then double- click the Sounds &...
  • Page 242 Windows XP Information BisonCap/Aveocap BisonCap/AveoCap are video viewers for general purpose video viewing and test- ing, and for capturing video files to .avi format. Pre-Allocating File Size/Space 1. Run the BisonCap/Aveocap application from the desktop shortcut (it is recom- You may pre-allocate the mended that you set the capture file before the capture process - see “Set Cap- file size (File >...
  • Page 243 Windows XP Information Set Capture File (BisonCap) Prior to capturing video files you may select the Set Capture File... option in the File menu, and set the file name and location before capture (this will help avoid accidentally overwriting files). Set the name and location then click Open, then set the "Capture file size:"...
  • Page 244 Windows XP Information Reducing Video File Size Note that capturing high resolution video files requires a substantial amount of disk space for each file. After recording video, check the video file size (right-click the file and select Properties) and the remaining free space on your hard disk (go to My Computer, right-click the hard disk, and select Properties) If necessary you can remove the recorded video file to a removable medium e.g.
  • Page 245 Windows XP Information Eliminating Screen Flicker If you find that the video screen in the BisonCap/AveopCap program is flickering, you can try to adjust the setting in the Video Capture Filter options. Run the BisonCap/Aveocap application from the desktop shortcut. Go to Options and scroll down to select Video Capture Filter..
  • Page 246 Windows XP Information Zoom The BisonCap/AveoCap program allows you to zoom the camera in and out (note the zoom function is not available in all camera model applications). 1.Run the BisonCap/Aveocap application from the desktop shortcut. Figure E - 25 2.

  • Page 247: Wlan Module

    Windows XP Information WLAN Module Before installing the optional 802.11b/g USB WLAN module driver use the Fn + Wireless Device F11 key combination to toggle power to the module. Operation Aboard Aircraft 802.11b/g WLAN Driver Installation The use of any portable 1.
  • Page 248 Windows XP Information Network Connection Use the Windows Net- work Connections con- trol panel access available wireless net- works (Start > Settings > Network Connections or Start > Connect To > Show all Connections). Figure E - 26 Wireless Network Control Panels E - 48 WLAN Module...

  • Page 249: G/Hspa Module

    Windows XP Information 3.75G/HSPA Module If you have included an optional 3.75G/HSPA (High Speed Packet Access) module (see “Communication” on page D - 5 for specification details) in your purchase op- 3.75G/HSPA Module Options tion, you will have the appropriate application (3G Watcher or Mobile Partner) provided for your particular module.
  • Page 250 Windows XP Information Before installing the application, make sure that the 3.75G/HSPA module is on. Use the Fn+( ) key combi- nation (see “Function/Hot Key Indicators” on page 1 - 17) to toggle power to the 3.75G/HSPA module. Make sure you install the drivers in the order indicated in Table 4 - 1, on page 4 - •...
  • Page 251 Windows XP Information 3G Watcher Application Installation 1. Enable power to the module by pressing the Fn + key combination (the on screen icon will indicate the module’s power status). 2. If a Found New Hardware Wizard appears, click Cancel. 3.

  • Page 252: Mobile Partner

    Windows XP Information Mobile Partner With the 3.75G/HSPA module and USIM card (supplied by your service provider) installed you may then install the Mobile Partner application. The Mobile Partner application allows you to directly access your HSPA in- ternet service from the computer. Mobile Partner Application Installation 1.
  • Page 253 Windows XP Information Mobile Partner Application You will need to contact your service provider to obtain the exact details of how ex- actly to configure the settings on this page. Mobile Partner Help Profile Management To get help on Mobile Partner configuration Power on the 3.75G/HSPA module using the Fn +...
  • Page 254 Windows XP Information Connecting to the Service Provider 1. Power on the 3.75G/HSPA module using the Fn + key combination. 2. Access the Mobile Partner application from the Start menu (Start > Programs/All Programs > Mobile Partner), or by double-clicking the Mobile Partner icon on the desktop 3.
  • Page 255 Windows XP Information When the connection is successful a taskbar notification will appear (as below). Figure E - 30 Connected Taskbar Notification You can then access the internet, download e-mail etc. as per any internet connection. While you are connected the indicators in the Mobile Partner window will display uploading and downloading icons and a network icon in the taskbar To disconnect click the Disconnect icon, or right click the taskbar icon...
  • Page 256 Windows XP Information 11. The module will still be on, and you will need to press the Fn + key combination to turn it off. 12. If you click the Mobile Partner close icon a message will be displayed asking you to click OK to confirm the program exit and to terminate the connection.
  • Page 257 Windows XP Information Text Messaging Service In addition to standard internet services you may also send and receive SMS text messages using the Mobile Partner program, if your service supports SMS. Reading SMS Messages An icon will blink at the bottom of the Mobile Partner interface to notify you of any new messages received. Click the Text icon in the Mobile Partner Interface.

  • Page 258: E - 58 Fingerprint Reader Module

    Windows XP Information Fingerprint Reader Module If you have included the fingerprint reader in your purchase option (optional for Help & Manual Models C, D, F & H only) you will need to install the driver as per the instructions below.
  • Page 259 Windows XP Information User Enrollment Click Start > Programs/All Programs > Protector Suite QL > User Enrollment, or double-click the taskbar icon Click Initialize. On the first run of the program you will be asked to click the button to accept the license, and then click OK. Click Next and select “Enrollment to the hard disk”, and click Finish.
  • Page 260 Windows XP Information 11. Swipe the finger five times to enroll that finger. 12. Repeat the process for all the fingers you wish to enroll (see sidebar), and then click Next > Finish. 13. Click “Help” in the Fingerprint Control Center to get more information on any topic. 14.
  • Page 261 Windows XP Information Fingerprint Control Center Features Application Launcher The Application Launcher allows you to register applications to be launched when assigned to a particular fin- ger. Simply copy the application icon on to one of the registered fingers and ten click OK to close the application window.
  • Page 262 Windows XP Information E - 62...

  • Page 263: Windows 7 Information

    Windows 7 Information Appendix F: Windows 7 Information This Appendix contains information on the driver installation for the Windows 7 OS. Note that control panels (e.g. power and video) and configuration of certain items in Windows 7 may be different from Windows Vista. Consult your Windows 7 documentation, or item specific help for further information.

  • Page 264: Windows 7 Start Menu & Control Panel

    Windows 7 Information Windows 7 Start Menu & Control Panel Most of the control panels, utilities and programs within Windows 7 (and most other Windows versions) are ac- cessed from the Start menu. When you install programs and utilities they will be installed on your hard disk drive, and a shortcut will usually be placed in the Start menu and/or the desktop.

  • Page 265: Video Features

    Windows 7 Information Video Features This computer features two different (either SiS for Model A, B, E & G computers or NVIDIA for Models C, D, F & H computers) video options. You can switch display devices, and configure display options, from the Display control panel (in Appearances and Personalization) in Windows 7.

  • Page 266: Screen Resolution

    Windows 7 Information Screen Resolution Besides the built-in LCD, you can also use an external VGA monitor (CRT)/external Flat Panel Display as your display device. Figure F - 2 - Screen Resolution & NVIDA Control Panel/SiS Tray Icon Menu F - 4 Video Features...

  • Page 267: Attaching Other Displays

    Windows 7 Information Attaching Other Displays Configuring an External Display in Windows 7 Attach your external display to the external monitor port and turn it on. Go to the Screen resolution control panel. Click the Detect button. The computer will then detect any attached displays. Video Options Note that card types, specifications and drivers are subject to continual updates and changes.
  • Page 268 Windows 7 Information You can configure the displays from the Multiple Displays menu. Figure F - 4 - Screen Resolution - Multiple Display Options • Duplicate these displays - Shows an exact copy of the main display desktop on the other display(s) •...
  • Page 269 Windows 7 Information Using the Windows Logo Key + P Key Combination to Switch Displays You can also use the + P key combination to quickly change display configuration and modes. Attach your external display to the external monitor port and turn it on. Press the key combination.
  • Page 270 Windows 7 Information Configuring an External Display using the NVIDIA Control Panel Alternatively you can use the NVIDIA control panel to configure any attached dis- plays. Display Not Shown 1. Attach your external display to the external monitor port and turn it on. If the attached display 2.
  • Page 271 Windows 7 Information Enabling Clone or Dualview Modes Attach your external display to the external monitor port and turn it on. Go to NVIDIA Control Panel (see page Double-click Display (if the sub-menus are not visible), and then click Set up multiple displays. Any attached display will appear under “1.Select the displays you want to use.”...

  • Page 272: F - 10 Windows 7 Driver Installation

    Windows 7 Information Windows 7 Driver Installation Check the driver installation order from Table F - 1, on page F - 11 (the drivers must be installed in Insert the Device Drivers & Utilities + User’s Manual this order) which is the same as that listed in the disc into an attached CD/DVD drive and click Install Drivers Installer menu below.

  • Page 273: Updating/Reinstalling Individual Drivers

    Windows 7 Information Updating/Reinstalling Individual Drivers If you wish to update/reinstall individual drivers it may Driver - Windows 7 Page # be necessary to uninstall the original driver.To do this go Video Page F - 12 to the Control Panel in the Windows OS and double- click the Programs and Features item (Programs >...

  • Page 274: Driver Installation Procedure

    Windows 7 Information Driver Installation Procedure Video Insert the Device Drivers & Utilities + User’s Manual 1. Click 1.Install Video Driver > Yes. disc and click Install Drivers (button). Models A, B, E & G (SiS): 2. Click Yes (click Yes if you want to view the ReadMe file).

  • Page 275: Hot Key

    Windows 7 Information Modem CardReader 1. Click 3.Install Modem Driver > Yes. 1. Click 5.Install Cardreader Driver > Yes. 2. Click OK. 2. Click Install. 3. The modem is ready for dial-up configuration 3. Click Finish. Hot Key 1. Click 6.Install Hotkey Driver > Yes. Modem Country Selection 2.

  • Page 276: Optional Drivers

    Windows 7 Information Optional Drivers See the pages indicated for the driver installation procedures for any modules included in your purchase option. Where Windows 7 information differs from Windows Vista it will be included in this chapter; if Windows 7 in- formation is the same as Windows Vista then refer to Chapter 7 as indicated on the following page.

  • Page 277: Pc Camera Module

    Windows 7 Information PC Camera Module Before installing the PC Camera driver, make sure that the optional PC Camera is on. Use the Fn + F10 key combination (see “Function/Hot Key Indicators” on page 1 - 17) to toggle power to the PC Camera module. Make sure you install the drivers in the order indicated in Table F - 1, on page F - There are a number of different camera modules available with this computer model series.

  • Page 278: Pc Camera Driver Installation

    Windows 7 Information PC Camera Driver Installation 1. Insert the Device Drivers & Utilities + User’s Manual disc into the CD/DVD drive. 2. Click Option Drivers (button). 3. Click 1.PC Camera, Web cam > Yes. 4. Choose the language you prefer and click Next > Next. 5.

  • Page 279: Wireless Lan Module

    Windows 7 Information Wireless LAN Module If you have included a 802.11b/g WLAN module in your purchase option, make sure that the Wireless LAN mod- ule is on before installing the driver. Use the Fn + F11 key combination (see “Function/Hot Key Indicators”...

  • Page 280: 802.11B/G Driver Installation

    Windows 7 Information 802.11b/g Driver Installation If you see the message “Found New Hardware” click Cancel to close the window. 1. Make sure the module is powered on, then insert the Device Drivers & Utilities + User’s Manual disc into the CD/DVD drive. 2.

  • Page 281: 3.75G/Hspa Module

    Windows 7 Information 3.75G/HSPA Module If you have included an optional 3.75G/HSPA (High Speed Packet Access) module (see “Communication” on page D - 5 for specification details) in your purchase option, you will have the appropriate application provided for your particular module. Follow the instructions on page 7 - 21 to install the USIM card (which will be pro- vided by your service provider), and then install the application.

  • Page 282: 3G Watcher Application

    Windows 7 Information 3G Watcher Application With the 3.75G/HSPA module and USIM card (supplied by your service provider) installed you may then install the 3G Watcher application. The 3G Watcher appli- Wireless Device cation allows you to directly access your HSPA internet service from the computer. Operation Aboard Aircraft 3G Watcher Application Installation...

  • Page 283: Mobile Partner

    Windows 7 Information Mobile Partner With the 3.75G/HSPA module and USIM card (supplied by your service provider) installed you may then install the Mobile Partner application. The Mobile Partner Wireless Device application allows you to directly access your HSPA internet service from the com- Operation Aboard puter.

  • Page 284: Fingerprint Reader Module

    Windows 7 Information Fingerprint Reader Module If you have included the (optional) fingerprint reader in your purchase option you will need to install the driver as per the instructions below. Make sure you have administrator’s rights to your computer, and have a Windows password enabled for full se- curity protection.
  • Page 285 Windows 7 Information User Enrollment Click Start > Control Center (Start > All Programs > Protector Suite > Control Center). On the first run of the program you will be asked to click the Accept button to accept the license. If you have not set a Windows password you will be prompted to do so (note: If you have not set a password Protector Suite cannot secure access to your computer).
  • Page 286 Windows 7 Information 6. Click the button above any of the fingers to begin the enrollment process for that finger. 7. Swipe the finger until the progress bar reaches 100% to enroll that finger. Fingerprint 8. Repeat the process for all the fingers you wish to enroll (see sidebar), and then click Enrollment the close button to close the window.
  • Page 287 Windows 7 Information Click Start > Control Center (Start > All Programs > Protector Suite > Control Center) and then swipe a finger to allow you to Edit Fingerprints, register Applications, edit Settings and access the Help menu etc. 10. Click “Help” in Control Center Home to get more information on any topic. 11.

  • Page 288: Other Notes

    Windows 7 Information Other Notes: Bluetooth Module Note: The operating system is the default setting for Bluetooth control in Windows 7, and does not require a driver. See your Windows 7 documentation for specific information. Important Notice - 3.75G/HSPA & Bluetooth/Wireless LAN Modules In order to comply with FCC regulations you should NOT operate the 3.75G/HSPA module and the Bluetooth/Wireless LAN modules at the same time as this may disrupt radio fre- quency, and cause interference.

Table of Contents

Save PDF