Andrew MRx18 User Manual page 29

Parameter
Band
UL/ DL Inbalance
(dB)
Time Interval
*
if Auto Gain is disabled these parameters cannot be accessed
Confirm changes made by clicking the
Radio Frequency
For the single band repeater MRx18 only band 1 is displayed.
When Auto Gain is enabled, the gain is adjusted automatically. With
an entry in the Auto Gain inbalance field, the UL gain is decreased
compared to the DL gain for this value.
Possibility to select between three behaviours of Auto Gain:
0s/24h: Gain is reduced without latency time in case of too high input
power. Every 24 hours the repeater tries to increase gain by 1 dB to
max. output power in case input power has decreased again.
0s/12h: See above, but the interval for a try to increase gain again is
12 hours.
10s/12h: Gain is reduced after a latency time of 10s in case of too
high input power. Interval for a try to increase gain again is 12 hours.
Description of Auto Gain
button.
*
Page 29