Table of Contents
Advertisement
Comfort
Ambient Lighting*
Light your vehicle interior with a choice of several colors
with the ambient lighting feature. You can access this
feature through your SYNC 3 touchscreen.
Press Settings > Lighting > On
Tap a color to activate and set a color for ambient lighting.
Drag the colors up and down to increase or decrease
the intensity.
To switch ambient lighting off, press the active color once
or drag the active color all the way down to zero intensity.
The ambient lighting turns on when you switch on the
ignition and the headlamps. Your vehicle interior remains
lit until you switch off the ignition and either lock your
vehicle, or allow the accessory delay timer to expire.
12
Heated Front Seats*
Cargo Storage*
The front heated seat
You can store additional
controls are on the center
items in the cargo space
console near the gearshift
located underneath the
lever. Adjust the control to
load floor in the rear of the
your desired heat setting.
vehicle. Lift the release
handle to open it. Vehicles
Rear Reclining Seats*
with the standard sized
spare tire can adjust the
Pull the lever up to recline
load floor to two positions:
the seatback to the desired
high or low.
position. Pull the lever
up to fold the seatback
Additionally, there are four
forward. You may need to
tie-down anchors in the
fold the outboard head
rear cargo area (one in
restraints and lower the
each corner) to help
center head restraint first.
secure objects.
*if equipped
Comfort
continued
Moonroof and Sunscreen*
The moonroof and sunscreen have a one-touch open and
close feature. To stop them during a one-touch operation,
press the control a second time.
Press and release the rear of the control to open the
sunscreen. Press and release the front of the control to
close the sunscreen.
Note: If the moonroof is open, it closes automatically before
the sunscreen.
Press and release the rear of the control to open the
moonroof. The moonroof stops short of the fully opened
position. Press and hold the control again to open the
moonroof fully. Press and release the front of the control
to close the moonroof.
Memory Function*
Use this feature to program and recall
the positions of the driver seat and
power mirrors. The controls are on the
driver door. To program position 1, press
and hold the 1 button until you hear a
tone. Use this same procedure to set
positions 2 and 3 using the respective buttons. You can
now use these controls to recall the set memory positions.
See the Seats chapter in your Owner's Manual for details.
Tilting Front-row Head Restraints
Tilt the head restraint
forward for additional
comfort by gently pulling
the top of the head
restraint. Once it is in the
forward-most position,
tilting it forward once
more releases it to the
upright position.
Note: Do not attempt to
force the head restraint
backward after it is tilted.
*if equipped
13
Hide quick links:
Advertisement
Table of Contents
