Download Print this page

ACDC PLAZA S7x Installation Instructions

Advertisement

Quick Links

PLAZA S7x INSTALLATION INSTRUCTIONS
IP67
SUITABLE FOR WET LOCATIONS
WARNING NOTICE
ENGLISH
• Only to be installed by a qualified electrician.
• Disconnect the unit from mains power before installing or servicing
to avoid shock.
• Installation must be carried out in accordance with national and local
standards.
• Class 1 luminaires must be earthed.
• Class 3 luminaires must only be used with Class 2 power supply (US
markets only).
• Use correct polarity when wiring. If in any doubt contact the
installation helpline.
• acdc luminaires are designed for lighting applications and must not
be used for any other purpose.
• Do not exceed the product specified power ratings.
• Unauthorised repairs or modifications will void warranty.
FRANCAIS
• Ne doit être installé que par un électricien qualifié.
• Débranchez l'appareil de son alimentation secteur avant d'installer ou
d'entretenir.
• L'installation doit être effectuée conformément aux normes
nationales et locales.
• Les luminaires de classe 1 doivent être mis à la terre.
• Les luminaires de classe 3 ne doivent être utilisés qu'avec une
alimentation de classe 2.
(Marchés américains uniquement).
• Utilisez la polarité correcte lors du câblage. En cas de doute,
contactez la ligne d'assistance de l'installation.
• les luminaires acdc sont conçus pour des applications d'éclairage et
ne doivent pas être utilisés à d'autres fins.
• Ne dépassez pas les valeurs de puissance spécifiées par le produit.
• Les réparations ou modifications non autorisées annulent la garantie.
1
Plaza S7x Instructions: Helpline +44 (0) 845 862 6400.
DEUTSCHE
• Nur von einem Elektrofachmann installiert werden.
• Trennen Sie das Gerät vom Netz, bevor Sie die War tung des Servers
durchführen, um Stöße zu vermeiden.
• Die Installation muss gemäß den nationalen und lokalen Normen
durchgeführt werden.
• Leuchten der Klasse 1 müssen geerdet sein.
• Leuchten der Klasse 3 dürfen nur mit Netzteil der Klasse 2
verwendet werden. (Nur US-Märkte).
• Bei der Verdrahtung die richtige Polarität verwenden. Bei Zweifeln
wenden Sie sich bitte an die Installations-Helpline.
• acdc-Leuchten sind für Beleuchtungsanwendungen ausgelegt und
dürfen nicht für andere Zwecke verwendet werden.
• Überschreiten Sie nicht die angegebenen Produktleistungen.
• Unbefugte Reparaturen oder Änderungen erlischt.
ITALIANO
• Solo per essere installato da un elettricista qualificato.
• staccare l'apparecchio dalla corrente prima installingor
manutenzione per evitare urti.
• L'installazione deve essere effettuata in conformità con le norme
nazionali e locali.
• Classe 1 apparecchi devono essere messi a terra.
• Classe 3 apparecchi devono essere utilizzati solo con classe 2 di
alimentazione (Mercati USA solo).
• Utilizzare la corretta polarità durante il cablaggio. In caso di dubbio
contattare il servizio di assistenza di installazione.
• Gli apparecchi ACDC sono progettate per applicazioni di
illuminazione e non devono essere utilizzati per altri scopi.
• Non superare il prodotto specificato potenze.
• riparazioni o modifiche non autorizzate saranno invalidare la
garanzia.
REQUIRED TOOLS
allen key sizes for bracket and
back plate are 2.5mm A/F
INS310 Rev.1

Advertisement

loading

Summary of Contents for ACDC PLAZA S7x

  • Page 1 • Bei der Verdrahtung die richtige Polarität verwenden. Bei Zweifeln installation helpline. wenden Sie sich bitte an die Installations-Helpline. • acdc luminaires are designed for lighting applications and must not • acdc-Leuchten sind für Beleuchtungsanwendungen ausgelegt und be used for any other purpose.
  • Page 2 • Température ambiante d’utilisation -200C à 500C. • Non utilizzare se l’apparecchio, connettori o cavi sono danneggiati. • Ne pas utiliser si le luminaire, les connecteurs ou le câblage sont endommagés. WHAT'S IN THE BOX? Plaza S7x Instructions: Helpline +44 (0) 845 862 6400. INS310 Rev.1...
  • Page 3 8. Refit back cover, torque rating 1 newton meter. diametre. Remove link wire when wiring in series, do not remove end of run. Check all cable entry points and tighten to the recommended torque rating of 6.25N/m Plaza S7x Instructions: Helpline +44 (0) 845 862 6400. INS310 Rev.1...
  • Page 4 9. Turn on, focus, tighten. 10. TREE STRAP INSTALATION: Screw bracket of the Plaza S7x to the tree strap bracket. º adjustability M6x12 SHCS (socket head cap screw). M6 FLANGED NUT. 11. TREE STRAP INSTALATION: Remove strap and wrap around Torque between 5 - 10 N/m.