Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ALLIANCE BCK-001
Summary of Contents for ALLIANCE BCK-001
- Page 1 Bluetooth Hands-Free Car Kit Model No. BCK-001 Installation Guide...
- Page 2 Specification: Product Bluetooth Hands-Free Car Kit Bluetooth 1.1 specification Bluetooth Compliance Bluetooth headset profiles 2.45 GHz ISM band Frequency Band 79 channels frequency hopping TX Output Power 0.36 mW Receiver Sensitivity <-78dBm Operating Range Up to 10 meters Security Encrypted link Maximum current 150mA Input Voltage...
- Page 3 Installation: 1. Insert the cigarette lighter plug of Bluetooth Car Kit into the cigarette lighter socket in the car. 2. Insert the microphone plug into the microphone socket on Bluetooth Hands Free Car kit, and place the microphone at appropriate. Operation: ON/OFF button To control power on/off by pushing ON/OFF button.
- Page 4 R520m. For other cell phones with Bluetooth, such as Ericsson T68, Ericsson T39, Nokia 6310, are nearly the same procedure. 7.1 Switch the car kit on . (Approximately 2 sec) and there is ring tone means the car kit is turn on, then press Talk button (Approximately 2 sec.) till the red and green LED is blinking ( is Red LED and...
- Page 5 7.2.6 The cell phone asks for the passkey for this connection. Please enter (1234) and press “YES”. 7.2.7 Now the phone displays a progress bar with the title “Pairing”. If everything works fine the message “Pairing succeeded” appears. 7.2.8 After a successful pairing the phone asks if you want to change the name of the paired device (press “YES”...
- Page 6 7.4.2 Select “Bluetooth” “Search for Audio Accessories”. 7.4.3 Press select key and start search. It displays all the searching results. Choose the “CSR-bc2” with this headset symbol to select the CSR headset solution by pressing “OK”. 7.4.4 The next step adds the headset to the paired device; therefore press “OK”.
- Page 7 Sony Ericsson Sony Ericsson T68 / T68i FCC Notices This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation .
Need help?
Do you have a question about the BCK-001 and is the answer not in the manual?
Questions and answers