Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Flying Voice FTA1101
Summary of Contents for Flying Voice FTA1101
- Page 1 User Manual User Manual FTA1101 Version 1.0...
- Page 2 User Manual Revision Record Version Date Description Applicability V1.0 2017-3-7 The first edition...
-
Page 3: Table Of Contents
User Manual Table of Contents 1. Introduction........................... 1 1.1 Package Contents ........................ 1 2. Product Overview ......................... 2 2.1 FTA1101 ..........................2 2.2 Hardware Specification....................... 2 2.3 Front View and LEDs Introduction ..................3 Installation............................5 2.4 Connection topography ....................... 5 2.5 Installation Steps ......................... - Page 4 User Manual 6.4.1 Line1 ........................23 6.4.2 SIP Settings ......................26 6.4.3 VoIP QoS........................ 26 6.5 Phone..........................27 6.5.1 Preferences ......................27 6.5.2 Dial Rule ........................ 28 6.5.3 Phonebook......................28 6.5.4 Call Log........................30 6.6 Administration........................30 6.6.1 Management......................30 6.6.2 Firmware Upgrade ....................
-
Page 5: Introduction
User Manual 1. Introduction Thank you for choosing FTA1101 Wireless VoIP ATA adapter. This ATA adapter will allow user to make ATA call using your broadband connection. This manual provides basic information on how to install and connect FTA1101 VoIP ATA adapter to the Internet. -
Page 6: Product Overview
User Manual 2. Product Overview FTA1101 Features/Model FTA1101 Picture 2 RJ45 10/100Mbps (WAN/LAN) Network Ports FXS Ports SIP Accounts Client/Server DHCP G.711(A-law, U-law), G.729A/AB,G.723,G.722 Voice Codec Integrated IVR, Web browser, Auto-Provision with HTTP/TFTP/HTTPS,TR069, SNMP Management T.30,T.38 Fax Hardware Specification Item... -
Page 7: Front View And Leds Introduction
Blinking The device is power on Port Name Description Reset Press 10s to set FTA1101 factory settings. WAN(RJ-45) Connect to Internet or router LAN(RJ-45) Connect to PC or build a small LAN network PHONE(RJ11) Connect to traditional phone or FAX Machine... - Page 8 User Manual For phone charger or LTE Dongle...
-
Page 9: Installation
Connection topography Installation Steps Step 1: Insert one end of the Ethernet cable into the WAN port on the back panel of the FTA1101 and the other end of cable to your existing broadband connection port (e.g. router or Ethernet switch) -
Page 10: Ivr
Step 2.Pick up phone and press “****” to start IVR, then FTA1101 will report sound prompting “please enter your option, one WAN Port ……”. Step 3.Choose the operation code from 0 to 9, then FTA1101 will report the contents, details are in the following table. - Page 11 If you want to quit by the wayside, press “*” Step 1.Pick up phone and press “****” to start IVR Step 2.Choose “2”, and FTA1101 report current WAN Port IP Address Step 3.Input the new WAN port IP address and with the end char #, ...
- Page 12 Step 2.Choose “7”, and FTA1101 report “Reboot” Step 3.Prompt "Please enter password", the method of inputting password is same as operation 1. Step 4.FTA1101 will reboot if password is right and operation is properly. Step 1.Pick up phone and press “****” to start IVR Step 2.Choose “8”, and FTA1101 report “WAN Port Login”...
-
Page 13: Notice
Notice In Voice Menu, press *(star) to return to up level menu. If any changes made in the IP assignment mode, please reboot the FTA1101 to take the settings into effect. When enter IP address or subnet mask, input “*” after an address field and add “#” to finish inputting For example, to enter the IP address 192.168.1.11 by keypad, press these keys:... -
Page 14: Parameters Introduction
User Manual 4. Parameters Introduction Password There are 2-level to access to FTA1101: administrator level and user level, password of different levels are different. User with administrator level can browse and set all configuration parameters, while user with user level can set all configuration parameters except SIP1/2 that some parameters can not be changed, such as server address and port. -
Page 15: Login To Web
User Manual 5. Login to WEB FTA1101 has an embedded Web server that will respond to HTTP get/post requests． User can use ． a Web browser like Microsoft’s IE to login and then configure FTA1101 Login WEB via LAN port Step 1: Open WEB browser;... -
Page 16: Web Interface Introduction
Every time making some changes, user should press the button to confirm the changes. After pressing the button, the red notice will appear to notice user to reboot. To cancel the changes. Press it to reboot FTA1101. -
Page 17: Configuration From Web
User Manual 6. Configuration from WEB Status User can view FTA1101 Basic and Syslog. It is the first page which user will see firstly after login to WEB. 6.1.1 Basic User can see the Product Information, SIP Account Status, Net Status, VPN Status, LAN Status,... -
Page 18: Syslog
User Manual 6.1.2 Syslog In this configuration Interface，you can view Syslog, which record the FTA1101’s important configuration information. By default, syslog is enabled, and the level is INFO, there are two system log level, INFO and Debug, in Debug level, there will be more information. If you want to change, please go to Administration/Management page, System Log Setting column to change. -
Page 19: Network
Static: Users need to set IP Address, Subnet Mask, Gateway IP and DNS. DHCP: FTA1101 will auto-configuration the WAN parameter with immediate effect. PPPoE: Users can enable FTA1101 to connect to Internet by ADSL. Interface 1.Static 1) Set “Static” in the “INTERNET” text. -
Page 20: Lan
Introduction 4) You should click the “Reboot” in the left of the page to reboot the FTA1101 if you see the words “Please REBOOT to make the changes effective!” After Reboot, you can see PPPoE Status and the network parameters in the System Status page if FTA1101 connect successfully. - Page 21 In this page, user can set the IP address of the device and set DHCP server. DHCP server is a kind of network function, FTA1101 can supply DHCP service for the network which is linked with FTA1101’s LAN if you enable the DHCP server for FTA1101’s LAN.(By default this is enabled).
-
Page 22: Vpn Settings
FTA1101’s LAN to use the PC’s service. Now, you should use Generally the FTA1101’s DMZ to realize it. Introduction Here, DMZ is the same with mapping ports for network equipment. PC which is linked with FTA1101’s LAN can get the requests from... -
Page 23: Ddns
User Manual the LAN by some ports of FTA1101’s WAN retransmits. (Your PC is DMZ computer for short as follows.) User must enable “NAT” mode when want to use DMZ. Interface 1)DMZ Enable: if or not enable DMZ Settings... -
Page 24: Wireless
User Manual Wireless 6.3.1 Basic Interface 1) Radio On/Off: Select Radio On to enable the wireless, select Radio Off to disable wireless. 2) Network Moder: Choose one network mode from the five types. Settings 3) SSID: The name of the wireless name, it can be any text numbers or various Introduction special characters. -
Page 25: Wireless Security
User Manual 6.3.2 Wireless Security Interface 1)SSID Choice: Choose one SSID from SSID, Multiple SSID1, Multiple SSID2 and Multiple SSID3. Settings 2) Security Mode: Select an appropriate encryption mode to improve Introduction the security and privacy of your wireless data packets. Each encryption mode will page and ask you to offer additional configuration. -
Page 26: Station Info
User Manual 6.3.5 Station Info 6.3.6 Advanced... -
Page 27: Sip
User Manual 6.4.1 Line1 Interface 1) Line Enable: If or not enable FXS1 2) Peer To Peer: If or not enable Peer To Peer on FXS1 port. 3) SIP Proxy: The IP address of SIP Server. 4) SIP Proxy Port: The port which SIP Server supports for Basic VOIP service, default is 5060. - Page 28 User Manual G.711A, G.711U, G.722,G.729 and G.723. And G.723 support 5.3kbps and 6.3kbps coding speed. 2) Packet Cycle(ms): the RTP packet cycle time Settings 3)Silence Supp Enable: if or not enable silence Introduction 4)Echo Cancel: if or not enable echo cancel 5)T.38 Enable: if or not enable T.38 6)T.38 Redundancy: if or not enable T.38 redundancy.
- Page 29 6) Register Refresh Interval (Second): The interval between two normal Register messages. You can use the default setting. 7). RTP Port: FTA1101 will select idle port for RTP if you set “0”, otherwise FTA1101 use the value you set. Generally speaking, set “0”.
-
Page 30: Sip Settings
User Manual 6.4.2 SIP Settings Interface 1) SIP Parameters: Settings This page displays the SIP parameters. Introduction 2) NAT Traversal If you want traverse NAT/Firewall, please enable NAT Traversal and fill in the corresponding parameters. 6.4.3 VoIP QoS Some ISP supply QoS services. The QoS services can make the best of improving the quality of Voice application. -
Page 31: Phone
User Manual Phone 6.5.1 Preferences Preferences Interface Settings 1) Handset Input Gain: adjust the input gain from 0-7. Introduction 2) Handset volume: adjust the output volume from 0-7. Interface Regional Settings In this page, user can define tone type and set some Introduction parameters of the FXS1 port. -
Page 32: Dial Rule
ICMP Ping:If or not enable ICMP ping. Escaped char enable:If or not enable escaped char. 6.5.2 Dial Rule If you set a shortcut number for a dial rule, when you dial shortcut number, FTA1101 will realize whole dial rule immediately. Interface Picture 1 Picture 2 Dial Plan:If or not enable dial plan. -
Page 33: Phonebook
User Manual FXS: Select which FXS port uses the rule. Digit Map: The digit map sting of dial plan, details please refer to dial plan user manual. Action:Choose the action, when user’s dial string matches the dial rule, the device’s action, deny or dial out. 6.5.3 Phonebook In this configuration interface, you can set the blacklist, enter the name... -
Page 34: Call Log
User Manual 6.5.4 Call Log Settings User can view FTA1101 call log, including missed, dialed and answered Introduction calls. User can also delete the call logs. Interface Administration 6.6.1 Management Save Config Interface File Settings In this column, user can upload a new configuration file for the Introduction device, also can save the configuration file to local PC. - Page 35 Settings change the password. Introduction 2)Language:Select another language, FTA1101 support English, Russian, Finnish, Spanish, Chinese and so on. 3)Web Access: Enable or disable web access, user can also define the web access port and web idle timeout. Time/Date...
-
Page 36: Firmware Upgrade
In this webpage, user can upload https provision SSL certificates or upload the TR069 certificates. FTA1101 has deleted the https provision, and deleted this webpage, Flyingvoice will add the https provision soon in the new firmware, so we still keep this section. -
Page 37: Provisioning
6.6.4 Provisioning 1) Provisioning allow FTA1101 auto-upgrading or auto-configuring 2) The current FTA1101 supports 2 ways to provision: TFTP and HTTP. Before testing or using TFTP, user should have tftp server and upgrading Generally file and configuring file. - Page 38 Delay” time, default is 3600s. 6)Forced Resync Delay:If it’s time to resync, but FTA1101 is busying now, in this case, FTA1101 will wait for a period time, the longest is “Forced Resync Delay”, default is 14400s, when the time over, FTA1101 will forced to resync.
-
Page 39: Snmp
User Manual Settings provision. Introduction 2)Upgrade Error Retry Delay:If the last upgrade fails, FTA1101 will try upgrading again after “Upgrade Error Retry Delay” period, default is 3600s. 3) Upgrade Rule: URL of upgrade file 6.6.5 SNMP Interface 1)SNMP Enable:If or not enable SNMP Settings 2)Trap Server Address:Enter the trap server address. -
Page 40: Diagnosis
Dial the number directly and wait for 5 seconds (default No Key Entry Timeout). Dial the number with ending char #, FTA1101 will dial out immediately Dial the phone number which matches one dial rule, FTA1101 will dial out immediately, no need to press # or wait for 5 seconds. -
Page 41: Call Transferring
User Manual resume the bi-directional media. Call Transferring FTA1101 supports blind transfer and attended transfer. 7.4.1 Blind Transfer Assuming that call party A and party B are in conversation, A wants to Blind Transfer B to C Step 1.Party A dials *98, A will hear dialing tone Step 2.Dial party C’s number, and press # (or wait for 5 seconds) to call C, then C will ring, A will... -
Page 42: Direct Ip Calls
User Manual Step 2: FTA1101 will forward incoming call to the forwarded number according to the settings of Call Forward and call status Direct IP calls Direct IP calling allows two phones, that is, an ATA with an analog phone and another VoIP Device, to talk to each other without a SIP proxy. -
Page 43: Hotline
Step 1.Set hotline in SIP Account→Line1→Supplementary Service Subscription, you can refer to the following picture. And then save the changes. Step 2.Picking up handset or press speaker button, FTA1101 will ring hotline immediately. If you want to delay some seconds after pick up the handset, please add delay time. For example, FTA1101 will call 511 after user picks up the handset for 4 seconds. -
Page 44: Password Control
In local: Step 1.Open Administration/Management page, System Log Setting column. Step 2.Choose log level from INFO and Debug, in INFO level, FTA1101 records INFO log, and in Debug level, FTA1101 records all debug information. Step 3.Press Save button to save and then press Reboot button to make changes effective. -
Page 45: Software Feature
User Manual 8. Software Feature Support SIP V2.0（RFC 3261/RFC3262） Support G.711 (A-Law, μ-Law), G.723, G.722 and G.729A/AB Codes Support two RJ45 10/100M that one is WAN port and another is LAN port. Support two RJ-11 for FXS port to connect your analog phone ... - Page 46 User Manual Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.