Table of Contents
Advertisement
4.
Lift the right-hand end of the cartridge. Then,
pull the cartridge to the right to release the
left-hand end.
Remove the toner cartridge. Discard it in
accordance with your local regulations.
5.
Unpack the new toner cartridge. Gently shake
it from side to side to loosen and distribute the
toner evenly inside the cartridge.
6.
Remove the adhesive tape from the
underside of the cartridge.
CAUTION! Do not touch the toner release
lever until the toner cartridge is installed in
the image drum. If you do, it will open the
toner release slot and spill toner.
• Hold the cartridge by its top center with
the colored release lever to the right.
• Insert the left end of the cartridge into the
top of the image drum.
• Push it firmly against the spring on the
drum unit.
12
Advertisement
Table of Contents
