Table of Contents
Advertisement
Quick Links
HAKKO HOT AIR GENERATOR
100V HOT AIR GENERATOR
HAP1012
INSTRUCTIONS MANUAL
Thank you for your choosing our product.
Read the instructions before use and keep in the
convenient place for future reference.
Please confirm the following on delivery.
・ Check if the name plate is correct as you ordered.
・Check if there are any damages or deformation
during transportation.
・ Check if there are any loosened bolts or screws.
B3- 2029- 01
Advertisement
Table of Contents
Summary of Contents for Hakko Electric Machine Works Co., Ltd. HAP1012
- Page 1 HAKKO HOT AIR GENERATOR 100V HOT AIR GENERATOR HAP1012 INSTRUCTIONS MANUAL Thank you for your choosing our product. Read the instructions before use and keep in the convenient place for future reference. Please confirm the following on delivery. ・ Check if the name plate is correct as you ordered.
- Page 2 FOR SAFE USE OF THIS PRODUCT We use the following symbols for safety. DANGER Improper use causes the danger of death or injury. WARNING Improper use may cause the danger of death or injury. Improper use may cause the danger of light injury or CAUTION property damage.
- Page 3 ● In case of powder transportation ● Do not use in dusty or linty by hot air, the check valve is environment. needed on the outlet. Heated lint or dust may cause fire. If powder reverses into the outlet, it may cause fire or explosion. ●...
-
Page 4: Main Specifications
1. MAIN SPECIFICATIONS Product No. HAP1012 Product code 00700710 Power 100V (50 ／60Hz) Heater capacity 1.2 kW Temperature range ofair at the exit of outlet 30 ∼ 40 ℃ (with the damper full open) 20℃ of environmental temperature. No air circulation 60 ∼... -
Page 5: Installation
CONTROL PANEL ① ② ③ ① Heater lamp ② Blower lamp ③ Power lamp ④ Temperature control dial ⑤ Operation switch ⑥ Power breaker ④ ⑤ ⑥ 3. INSTALLATION 《INSTALLATION LOCATION 》 ● The device is designed for indoor use. Installation is required at the following condition. ①... - Page 6 《PIPING 》 （1）In case of connecting the flexible hose with the outlet, tighten the Outlet hose with quick release band． Quick release band Flexible hose CAUTION Use suitable flexible hose according to temperatures of hot air. Otherwise it may cause fire. （2）In circular system use, after removing the plate damper, connect the flexible hose and tighten with quick release band．Use flanged damper to control air volume during circulation.
-
Page 7: How To Operate
4. HOW TO OPERATE (1) Turn on the power breaker on the control panel. The power lamp (orange) lights up. (2) Turn on the operation switch. (3) Rotate the temperature control dial in a clockwise direction. Hot air comes out from the outlet and the blower lamp (green) lights up. -
Page 8: Maintenance
6. MAINTENANCE (1) Wipe dirt on the body by cloth with alcohol. Do not use thinner or water. thinner water (2) Keep the inlet clean. AFTER-SALE SERVICE ● If you have any questions, If you have any questions about our products, contact with your distributors, or the Sales Head Office of HAKKO CO., LTD.