Wireless Settings - pear wireless 100 Series User Manual

pear wireless
4.2.2

Wireless Settings:

The wireless settings such as SSID and channel are displayed and can be
edited here.
Figure 12. Wireless Settings Window
SSID : This is the Service Set ID. Only Access Points and clients that share the
same SSID are able to communicate with each other.
Radio Channel: This is the channel that the Access Point uses to transmit and
receive information. The channel that you select here is restricted to the
channels that can be used within your Regulatory domain.
Regulatory Domain: The Regulatory domain is displayed here. Every country
has a Regulatory Domain concerning radio channels that can be used to
transmit and receive signals. This setting is a factory default that cannot
be changed.
Page 14
Manual
™
pear wireless
™
Wall Access Point User