Table of Contents
Advertisement
Accessibility
Changing reading units
When you use TalkBack, you can listen to the text on the screen. You can drag your finger up,
down, left, or right to select the text you want. By default, the device reads text aloud in the
selected area. Or, you can set the device to read text in other reading units, such as lines or
paragraphs.
Changing reading units by using the local contextual menu
1
Select some text to read.
2
Drag your finger upwards, and then to the right without releasing it to open the local
contextual menu.
3
Tap and hold the screen and draw a circle with your finger to explore menus. Then,
release your finger when you hear Change granularity.
4
Tap and hold the screen again and draw a circle with your finger to explore menus. Then,
release your finger when you hear the reading unit you want.
To change the shortcut gesture to open the local contextual menu, refer to
settings for shortcut
gestures.
Changing reading units using two-part vertical gestures
When you drag your finger upwards and then downwards on the screen, the reading unit
changes. The reading unit changes to page, paragraph, line, word, character, and then default.
When you drag your finger downwards and then upwards on the screen, the reading units
change in reverse order.
On the Apps screen, tap Settings
Manage gestures
Two-part vertical gestures
You can listen to the text next to the currently-selected text using the current reading unit.
To listen to the next section of text, drag you finger downwards or to the right on the screen.
Also, you can listen to the text before the currently-selected text using the current reading
unit. To listen to the previous section of text, drag your finger upwards or to the left on the
screen.
Accessibility
Vision
Cycle through reading granularities.
231
Configuring
TalkBack
Settings
Advertisement
Table of Contents
