Do you have a question about the T3 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Olymbros T3
Page 1
Model T3 Digital Trail Camera User Manual Thank you for purchasing the T3 Trail Camera. Please read this information completely before attempting to operate your camera, and keep it available for future reference.
Package Contents The following components are included in delivery: 1 - T3 Digital Trail Camera, 1 - USB Cable, 1 - Warranty Card, 1 - User Manual, 1 - Tree fastening strap Product Introduction 1.1 The Introduction of Product This trail camera for designed for monitoring animals by recording the movement of animals as they pass by the infrared sensor .
Setting UP And Connecting If you are not familiar with the operation of this camera, the following instructions will help you get a quick overview. Before doing any operation, please make sure you have loaded bat- teries and plugged the SD card correctly . 2.1 Power supply •...
Note • The device supports SD/SDHC memory cards with a capacity of up to 32 GB. • To avoid malfunctions, keep the memory card away from moisture and avoid strong vibra- tion, dust, heat sources and direct sunlight . • Insert the memory card as indicated by the icon on the slot. •...
3.1 Mode To select whether photos or videos are to be recorded in motion detection mode . In “Cam + Video” mode, the camera first takes a photo and then starts filming video. In “Camera” mode,”Video Size”,”Video Length” are unavailable . In”Video” mode,”Photo Size”,”Picture No .
3.6 Video length Videos are in AVI format that can be played back on most video players . Use the but- tons to select the length of the video recording (3-30 seconds) that is to be made when video recording is activated . The longer the recording time selected, the less space you will have available on your memory card .
3.11 Timer Select “On” if the camera should only be active during a certain time period . In the screen menu that subsequently appears, you can then set the start and end time for the active phase: Press the buttons to set the hour for the start of the active phase .
Press the buttons to set the hour of the desired time interval . Then switch to the next field, “Min”, using the button . Press the buttons to set the minutes of the desired time interval. Then switch to the next field, “Sec”, using the button .
3.14 Serial NO. Select On to assign a serial number to each camera you have. You can use the combination of 4 digits and/or letters to record the location in the photos. This helps multi-camera users identify the location when reviewing the photos . 3.15 Audio If you want the camera to record sound when recording videos, select “On”...
• When the beep sound stopped,please switch to OFF position,and power off(take out the bat- teries or DC charger),and then install the batteries again, and switch to TEST position . • Now, the camera can be used in default mode. Activating live mode 1.
A: Shows that the selected recording is a video . If this does not appear,the selected recording is a photo. B: Shows the resolution of the selected video or photo C: Battery charge level display D: Shows the current recording number as well as the total number of recordings . E: Write protection status of the selected file F: Date/Time recording was made G: Indicator for type of SD card being used...
6.2 Delete All You can use this function to delete all recordings from the memory card. After you have called up this function, move the select bar to “Delete” and press OK to delete all recordings . 6.3 Slide show This function can be used to play back the photos stored on the memory card automatically .
Warranty Thank you for purchasing our products, we strongly recommend that you maintain your prod- uct well and ensure that you operate it with the guidelines of this manual . The warranty we offered to the camera is ONE YEAR from the date of purchase. In this year, if there are any quality problems, we would provide free after-sales service and ensure to deal with any production defects .
Technical Parameters Setting Category Parameters Image Sensor 16 Mega Pixels Color CMOS Maximum Pixel 4608 x 3456 Lens Angle 60° Camera Lens, Auto IR-Cut IR LED Up to 65ft/20m LCD Screen 48 x 35mm (2.36") Operation Keypad 6 Keypad Storage Support SD card (8MB ~32GB) Image Size 16MP = 4608 x 3456;...
Trouble Shooting Defect Possible cause Remedy The camera does No batteries inserted. Insert 8 x 1.5 V batteries not work. into the battery slots The batteries are dead. Replace the batteries. If you are unsatisfied with the service life of the batteries, you can use the solar panel(not included).
Page 20
Thank you for purchasing the T3 Trail Camera. Olymbros is a brand of Outwards LLC MADE IN CHINA...
Need help?
Do you have a question about the T3 and is the answer not in the manual?
Questions and answers