Contents 1. Location of Controls 2. Battery Fitting 3. Switching the Live Tester On 4. Auto Power Off 5. Low Battery 6. Range Selection 7. Test Key Selection 8. Static Discrimination 9. Multi Function Attachment 10. Training & Safety 11. Operation 12.
1. Location of Controls 2. Battery Fitting o Ensure battery spring is fitted in battery holder. o Ensure batteries are fitted correct way around as shown above. o Push and rotate as shown to attach.
3 Switching the Live Tester On Pressing the ON/OFF Power Key once will switch the unit on. The Live Tester will always switch on in the 240V range and illumination of this LED will indicate the power is on. Pressing the ON/OFF Power Key again will switch the unit off. This is indicated by a brief audible beep and a flash of the warning light.
10. Training & Safety o Ensure you have carefully read this manual and understood all aspects of the Live Tester function. o Always follow safety procedures and directives as published by your employer or local authority. o Always wear rubber gloves approved to Australian Standards and/or use approved hot sticks.
The Electric Field Detection System in the LiveTester is protected by international patents. The Static Discriminator System is also protected by patent applications. The symbols: Live Tester are subject to international trademark registrations and their use is expressly prohibited without written consent from StarLogixs Pty. Ltd.
Acts of God, abuse, misuse, improper maintenance and storage, flashover from high voltage conductors to the LiveTester or any repairs other than those provided by an authorised StarLogixs service facility, or transportation costs. StarLogixs is not responsible or liable for indirect, special, or...
Need help?
Do you have a question about the LiveTester LT 220 and is the answer not in the manual?
Questions and answers