Page 2
All trademarks are the properties of their respective owners. Technical Support If a problem arises with GreenOK and no solution can be obtained from the user’s manual, please contact your place of purchase or local distributor. Visit the Dadam Micro web site for more information - www.dadamMicro.com.
Page 3
GreenOK - Wireless Thermo-Hygro Monitor User’s Manual (Rev 2.0) LABELLING REQUIREMENTS (FCC Part 15.19 (a)(3)) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations.
User’s Manual (Rev 2.0) Safety Instructions Congratulations on your purchase of the GreenOK, wireless thermo-hygro monitor. This system provides the most efficient and professional solution to meet your needs. Please read this user’s manual and warranty before using your new wireless thermo-hygro monitor and keep the warranty for future reference.
GreenOK - Wireless Thermo-Hygro Monitor User’s Manual (Rev 2.0) 1. Instructions ‘GreenOK - Wireless thermo-hygro monitor’ monitors temperature and humidity in digital display. Temperature operating range is: in case of using external temperature and humidity sensor, -20℃ to 80℃ and 1% to 99%. And in case of using external temperature only sensor, temperature operating range is -40℃...
GreenOK - Wireless Thermo-Hygro Monitor User’s Manual (Rev 2.0) 2. Systems Configuration GreenOK has ‘Wireless Sensing Unit’ for monitoring temperature and humidity and ‘Local Monitoring Unit’ for displaying and receiving from sensing unit. Maximum 16 Wireless Sensing Units can be monitored simultaneously from a single Local Monitoring Unit.
GreenOK - Wireless Thermo-Hygro Monitor User’s Manual (Rev 2.0) Wireless Sensing Unit Setting up the Sensing Unit ▪ Turn on the power button and sensing unit transmits measuring temperature and humidity to monitoring unit 3 times while initializing. Transmitting LED ▪...
Page 13
GreenOK - Wireless Thermo-Hygro Monitor User’s Manual (Rev 2.0) <Figure 2> Using the Power Switch...
Page 14
GreenOK - Wireless Thermo-Hygro Monitor User’s Manual (Rev 2.0) GreenOK 1 2 3 4 1 2 3 4 WIRELESS THERMO-HYGRO MONITOR SENSOR ID TX INT GMS-120 1 2 3 4 1 2 3 4 TEMP HI TEMP LO ON ◀...
GreenOK - Wireless Thermo-Hygro Monitor User’s Manual (Rev 2.0) 5. Local Monitoring Unit Setting up the monitoring unit ▪ Power up the monitoring unit and operate like the followings. ・ The LED for Sensor number/temperature/humidity displays 1 to G(16) in order.
GreenOK - Wireless Thermo-Hygro Monitor User’s Manual (Rev 2.0) 6. Setting up the GreenOK Antenna ▪ Before setting it up, the antennas of sensing unit and monitoring unit move to adjust the vertical position. Sensing unit and monitoring unit can be on the table or on the wall using a loop.
GreenOK adopts fully qualified components to prevent radio field interference and network obstruction. Don’t take off the back label-radio certification label of wireless sensing unit. This label guarantees the approval of radio technical standards.
Need help?
Do you have a question about the GreenOK and is the answer not in the manual?
Questions and answers