Advertisement
Quick Links
Advertisement
Summary of Contents for Jetion solar JTxxxSFb series
-
Page 1: Installation Manual
Installation Manual Visionary green energy... - Page 2 1) Certificates requests Introduction 1.1) IEC 61730 • Jetion Solar Photovoltaic modules consist of crystalline silicon solar cells, high transmission and low iron toughened Jetion modules are designed to fulfill the criteria of Applica- glass, anti-aging EVA and high flame resistant backsheet,and tion class A requirements according to IEC 61730-1.
- Page 3 - Do not install the module in a location with extreme hail and/ 2.3) Materials requirements or snow. - Do not install the module in a location where it could be • Support structure immersed in water or continually exposed to water from a The support structure of the module is made of abrason sprinkler or fountain.
-
Page 4: Mounting Methods
d) The area of the cable mated with the connector is re- • Option 1: Clamping Mounting commended to be 4~6 mm², length: 1000mm, tempera- The clamps must not overlap the glass or shade the module ture range: -40［to 90. The maximum series fuse［IMax. Series surface,or distort the frame.Recommended torque is 5Nm. - Page 5 • Type 1: Standard Mounting • Type 2: Short Side Mounting Clamp Mounting rail The movement of the mounting rail and the clamps center-line are recommended to be The movement of the within the black arrow mounting rail and the area.
- Page 6 • Option 2: Bolting Mounting Module Type Cell Type Cell Dimensions Mounting Hole Mounting Hole Each module should secure the frames of module to sup- Quantity A x B x C (mm) E (mm) G x F (mm) porting structure through at least 4 mounting holes (corres- JT***SFa/b Mono 4 x 9...
-
Page 7: Maintenance And Cleaning
• Attach a separate conductor as grounding wire to the 4mm Dirt must never be scraped or rubbed away when diameter grounding holes with a set of M4 bolt, cup dry, as this will cause micro-scratches. We recommend that washer, flat washer, lock-toothed washer, spring washer and the system is being inspected at regular intervals. -
Page 8: Hazard Warnings
Danger of death from arcing! Modules generate direct current when light shines on them. An electric arc may be generated when connectors are used to turn the circuit on or off. We therefore recommended covering • Do not dismantle or drop the module and do not remove any modules with a lightproof cloth during installation. - Page 9 JETION SOLAR CHINA JETION SOLAR EUROPE JETION SOLAR USA Jetion Solar (China) Co., Ltd. Jetion Solar (Europe) Ltd. 10900-A South Commerce Blvd No. 1011, Zhencheng Road Industriering 10 Charlotte, NC 28273 Shengang, Jiangyin Municipality 9491 Ruggell Jiangsu Province 214443 Liechtenstein...