1. Manuals
  2. Brands
  3. Grandinroad Manuals
  4. Patio Furniture
  5. 43674 AQU
  6. Assembly instructions

Grandinroad 43674 AQU Assembly Instructions

Patio furniture & accessories. retro squares glider loveseat-aquatic. retro squares glider loveseat-pear green. retro squares glider loveseat-red. retro squares glider loveseat-white
Hide thumbs
1
2
3
4
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version

CARE AND MAINTENANCE

FRAMES

Cleaning

- Use mild soap and warm water. Do not use abrasive materials, cleansers or
bleach products. Rinse with clean water and dry thoroughly.

Maintenance

- Periodically clean and dry thoroughly. Be sure to drain any water
accumulated inside the frames. To thoroughly drain frames, remove foot caps and tilt the
frames, if necessary, to remove all water. This is critical. Water allowed to accumulate
inside the frames and then exposed to sub-freezing temperatures can cause damage to the
frame tubing. Such damage is not covered under warranty. Always clean, drain and dry
thoroughly before storing for the winter. For best results, always store or cover your
furniture when not in use. We recommend commercially available outdoor furniture covers.
Any small nicks or scratches can be covered with a light application of touch-up paint.
** When cleaning or moving large or heavy items, always have two people work together.
Never drag furniture.

FABRICS (CUSHIONS/SLINGS)

Cleaning -
Wipe minor spills immediately. Clean with mild soap, warm clean water and
soft cloth. Do not use abrasive materials, cleansers or bleach products. Although fabric has
been treated to resist stains, occasional use of commercially available fabric cleaners may
be necessary. Follow manufacturer's instructions.
- The best way to maintain the beauty of cushions and slings is to store them
Maintenance
in a dry area and out of the elements when not in use or cover with commercially available
outdoor furniture covers.

STRAPS

Cleaning -
Wash frequently with mild soap, warm water and a soft cloth. Rinse thoroughly
with warm, clean water. Do not use abrasive materials, cleansers or bleach products.
Maintenance -
Periodic application of commercially available vinyl cleaners and vinyl
protectors will enhance the look and prolong the life of straps. If your strap chair has
cushions, make sure any vinyl protectors applied are completely dry before placing cushion
back on the chair.
43674 AQU, Retro Squares Glider Loveseat-Aquatic
43674 PEG, Retro Squares Glider Loveseat-Pear green
43674 RED, Retro Squares Glider Loveseat-Red
43674 WHI, Retro Squares Glider Loveseat-White
PATIO FURNITURE & ACCESSORIES
ASSEMBLY INSTRUCTIONS
IMPORTANT!!!
STOP! PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE
ASSEMBLY. MAKE SURE YOU HAVE ALL THE PARTS AND HARDWARE AS
IDENTIFIED ON THE PARTS LIST.
MISSING PARTS? DAMAGED PARTS? WE CAN HELP YOU FASTER!
CALL OUR CUSTOMER SERVICE CENTER AT
8:00AM AND 8:00PM (EASTERN TIME) MONDAY THROUGH FRIDAY
(CLOSED HOLIDAYS).
OR, VISIT OUR WEBSITE AT: www.grandinroad.com
Page 1
1-800-491-4958
BETWEEN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 43674 AQU and is the answer not in the manual?

Questions and answers

Summary of Contents for Grandinroad 43674 AQU

  • Page 1 For best results, always store or cover your furniture when not in use. We recommend commercially available outdoor furniture covers. 43674 AQU, Retro Squares Glider Loveseat-Aquatic Any small nicks or scratches can be covered with a light application of touch-up paint.
  • Page 2 GLIDER BRACKET Fig.3 Fig.2 Fig.1 Remove all protective materials and set parts on a flat, non-abrasive surface. Identify parts packed in carton against the parts list. If you are missing Step 1: any parts or are unsure how to proceed with assembly, please call our Product Specialists immediately at 1-800-491-4958 .
  • Page 3 Fig.4 Fig.5 Place the completed seat assembly over the glider base assembly. Use 1/4"x65 mm bolts (F) to attach back portion of seat assembly to rear glider Step 4: bracket on glider base. From the outside of the glider bracket, insert bolt (F) inward in this exact order through: glider bracket / Ø15x6 mm washer (N) Fig.4 / glider seat frame (E) / Ø15x4 mm washer (M) / Ø6.5x1.0mm washer (K) / 1/4"...
  • Page 4 * NOTE: PARTS SHOWN ON PARTS LIST ARE NOT TO SCALE PARTS LIST DESCRIPTION ORDER PART # PARTS LIST DESCRIPTION ORDER PART # GLIDER BASE Ø15 X 6 MM HW0033 LEFT LEG PLASTIC WASHER GLIDER BASE 1/4" NUT HW0017 RIGHT LEG GLIDER LEG 5/16"...

This manual is also suitable for:

43674 peg43674 red43674 whi

Table of Contents